References
- Kocańda, S. (1990). Metal Fatigue. Part III in Experimental Methods in Mechanics of Solids. Amsterdam-Oxford-New York: Elsevier.
- Kocańda, D., Kocańda, S., & Torzewski, J. (2002). Fatigue crack growth rate in 2024-T3 aluminium alloy. In: Proceedings of the 19th Symposium on Fatigue and Fracture Mechanics, April 2002, (195-202). Bydgoszcz: ATR.
- Wanhill, R. J. H. (2002). Flight simulation fatigue crack growth guidelines. In: Proceedings of the 8th International Fatigue Congress, 2-7 June 2002, 1(5), 573-584. Stockholm, Sweden.
- Spence, S. H., Williams, N. M., Stonham, A. J., Bache, M. R., Ward, A. R., Evans, W. J., Hay, D., Urbani, C., Crawford, B. R., Loader, C., & Clark, G. (2002). Fatigue in the presence of corrosion pitting in an aerospace aluminium alloy. In: Proceedings of the 8th International Fatigue Congress, 2-7 June 2002, 1(5), 701-708. Stockholm, Sweden.
- Katoh, Y., Nakayama, H., & Tanaka, T. (2002). Fatigue crack growth behaviour of aluminium alloy under three-step varying load. In: Proceedings of the 8th International Fatigue Congress, 2-7 June 2002, 2(5), 1459-1466. Stockholm, Sweden.
- Sunder, R. (2002). An explanation for the residual stress effect in metal fatigue. In: Proceedings of the 8th International Fatigue Congress, 2-7 June 2002, 5(5), 3339-3350. Stockholm, Sweden.
- Gangloff, R. P. (2002). Environment sensitive fatigue crack tip process and propagation in aerospace aluminium alloys. In: Proceedings of the 8th International Fatigue Congress, 2-7 June 2002, Vol. 5(5), 3401-3430. Stockholm, Sweden.
- Forth, S. C., Keat, W. D., & Fawrow, L. H. (2002). Experimental and computational investigation of three-dimensional mixed-mode fatigue. Fatigue and Fracture of Engineering Materials and Structures, 25(1), 3-15.
- Schijve, J. (2002). Fatigue of structures and materials in the 20th century and the state of the art. In: Proceedings of the 14th Bienniel Conference on Fracture -ECF 14, 2002, Vol. III/III, 211-262.
- Schijve, J. (2001). Fatigue of structures and materials, Dordrecht, Boston, London: Kluver Academic Publishers.
- Zhang, X. P., Wang, C. H., Ye, L., & Mai, W. (2002). In situ investigation of small fatigue crack growth in poly-crystal and single-crystal aluminium alloys. Fatigue and Fracture of Engineering Materials and Structures, 25(2), 141-150.
- Kermanidis, A. T., & Pantelakis, S. G. (2001). Fatigue crack growth analysis of 2024-T3 aluminium specimens under aircraft service spectra. Fatigue and Fracture of Engineering Materials and Structures, 24, 699-710.
- Ranganathan, N. (2002). Certain aspects of variable amplitude fatigue. In: Proceedings of the 8th International Fatigue Congress, 2-7 June, 2002, 1(5), 613-621. Stockholm, Sweden.
- Brockenbrough, J. R., Bucci, R. J., Kulak, M., Zonker, H. R., Bray, G. H., Heinimann, M. B., & Newman, J.C. (2003). Crack growth prediction methods for spectrum loading to support fatigue and durability damage tolerance evaluation. In: Proceedings of the 22nd Symposium of International Committee on Aeronautical Fatigue - Fatigue of Aeronautical Structures as an Engineering Challenge, 5-9 May 2003, Vol. 1, pp. 14. Lucerne, Switzerland.
- Goncalves, W., Pramono, A., & Chaves, C. E. (2003). Embraer New Family of Jets-Meeting the Current Fatigue and Damage Tolerance Requirements. In: Proceedings of the 22nd Symposium of International Committee on Aeronautical Fatigue - Fatigue of Aeronautical Structures as an Engineering Challenge, 5-9 May, 2003, Vol 1, pp. 21. Lucerne, Switzerland.
- Lazzeri, L., & Ratti, G. (2002). Fatigue crack propagation in thin sheets under typical helicopter spectra. In: Proceedings of the 8th International Fatigue Congress, 2-7 June 2002, 1(5), 585-592. Stockholm, Sweden.
- Iyyer, N. S., Kwon, Y. S., & Phan, N. (2003). P-3C crack growth life predictions under spectrum loading. In: Proceedings of the 22nd Symposium of International Committee on Aeronautical Fatigue - Fatigue of Aeronautical Structures as an Engineering Challenge, 5-9 May 2003, Vol. 2, pp. 18. Lucerne, Switzerland.
- Skorupa, M. (1996). Empirical trends and prediction models for fatigue crack growth under variable amplitude loading. Petten, Netherlands: Energy Research Foundation. (ECN-R-96-007)
- Ivanova, V., & Shaniavsky, A. (1998). Quantitative fractography. Metallurgy Press.
- Kocanda, D., Kocanda, S., & Torzewski, J. (2004). Reconstruction of fatigue crack growth rate for 2024-T3 aluminium alloy sheet on the basis of fractographic analysis. The Archive of Mechanical Engineering, 51(3), 361-376.
- Hertzberg, R. (1983). Deformation and fracture mechanics of engineering materials, John Wiley & Sons Inc., 2nd revised edition.
- Karasiewicz, T., Bogdanowicz, Z., & Polanski, J. (2007). The influence of amplitude and load rate on the amount of energy dissipation for aluminium alloy subjected to cyclic torsion. Bulletin of Military University of Technology WAT, 56(4). Warsaw, Poland.
- Szymczyk, E., Jachimowicz, J., & Bogdanowicz, Z. (2007). Investigations of fatigue crack initiation in rivet-joints. Transactions of the Kielce University of Technology. Mechanics, 4. 125-126. (in Polish). Warsaw, Poland.
- Bogdanowicz, Z. (2008). Elaboration of the method of aeronautical skin joints lifetime determination taking into account materials and technological features. Sc. Project, (in Polish). Warsaw, Poland: Military University of Technology.