An investigation of the mechanism of bainite transformation in experimental 0.2c-1v-2mn steel

Ławrynowicz, Z.

doi:10.2478/v10077-012-0005-4

Abstract

The paper presents an investigation of the mechanism of bainite transformation in 0.2C-1V-2Mn steel using high speed dilatometry and TEM backed by thermodynamic analysis. Obtained results confirm the incomplete reaction phenomenon with the cessation of the bainite transformation well before paraequilibrium is achieved. These experimental data indicate that bainitic ferrite forms by a displacive transformation mechanism, but soon afterwards, excess of carbon is partitioned into the residual austenite. The results are discussed in terms of the mechanism of bainite transformation.

References

1. Aaronson H.I., Reynolds W.T., Shiflet G.J.,Spanos G.: Bainite Viewed Three Different Ways. Metall. Trans. A 21A (1990), 1343-1380.10.1007/BF02672557
Search in Google Scholar
2. Bhadeshia HKDH, Christian JW.: Bainite in steels. Metall Trans. A 21A (1990), 767-797.10.1007/BF02656561
Search in Google Scholar
3. Ławrynowicz Z.: Mechanism of bainite transformation in Fe-Cr-Mo-V-Ti-C steel. International Journal of Engineering 12 (1999), 81-86.
Search in Google Scholar
4. Ławrynowicz Z., Barbacki A.: Features of Bainite Transformation in Steels. Advances in Materials Science 2 (2002), 5-32.
Search in Google Scholar
5. Ławrynowicz Z.: Ausferritic or Bainitic Transformation in ADI, Proceedings of the 12th International Symposium on Advanced Materials, Paper No: 98, Rawalpindi, Pakistan, ISAM 2011.
Search in Google Scholar
6. Bhadeshia HKDH.: Bainite in steels 2nd ed., London, The Institute of Materials, (2001).
Search in Google Scholar
7. Ławrynowicz Z.: Decarburisation of bainitic ferrite laths and its influence on the microstructure in Fe-Cr-Si-C steel. Advances in Materials Science 11 (2011), 56-64.10.2478/v10077-011-0011-y
Search in Google Scholar
8. Ławrynowicz Z.: Affect of decarburisation times of bainitic ferrite laths on the microstructure in Fe- Cr-C steel. Journal of Polish CIMAC 6 (2011), 127-136.10.2478/v10077-011-0011-y
Search in Google Scholar
9. Bhadeshia H.K.D.H., David S.A., Vitek J.M. and Reed R.W.: Stress induced transformation to bainite in Fe-Cr-Mo-C pressure vessel steel. Materials Science and Technology 7 (1991), 686-698.
Search in Google Scholar
10. Ławrynowicz Z.: Affect of cementite precipitation on the extend of bainite transformation in Fe-Cr-C steel. Advances in Materials Science. 11 (2011), 13-19.10.2478/v10077-011-0013-9
Search in Google Scholar
11. Dyson D.J., Holmes, B.: Effect of alloying additions on the lattice parameter of austenite. J. Iron Steel Inst. 208 (1970), 469-474.
Search in Google Scholar
12. Hehemann R.F., Kinsman K.R., Aaronson H.I.: A debate on the bainite reaction. Metall. Trans. 3 (1972), 1077-1094.
Search in Google Scholar
13. Hultgren A.: Isothermal transformation of austenite. ASM Transactions. 39 (1947) 915-1005.
Search in Google Scholar
14. McLellan, R.B., Dunn, W.W.: J.Phys.Chem. Solids. 30 (1969), 2631-2637.
Search in Google Scholar
15. Caballero, F.G., Miller, M.K., Babu, S.S., Garcia-Mateo, C., Atomic scale observations of bainite transformation in a high carbon high silicon steel, Acta Materialia, 55, 381-390, 2007.10.1016/j.actamat.2006.08.033
Search in Google Scholar

An investigation of the mechanism of bainite transformation in experimental 0.2c-1v-2mn steel

Abstract

Paradigm

My account