The analysis of influence of Tvergaard's parameters on S235JR steel response in high stress triaxiality

Kossakowski, Pawel

doi:10.2478/v10077-012-0003-6

Abstract

The influence of Tvergaard's parameters q_i of Gurson-Tvergaard-Needleman (GTN) material model on S235JR steel response was considered in the study. The analysis concerns the strength curves simulated numerically for notched tensile elements under static tension in complex stress state defined by high initial stress triaxiality σ_m/σ_e > 1. Typical and material-dependent values of Tvergaard's parameters q_i were examined. The influence of the Tvergaard's parameters q_i on material response was noticed at the failure range for S235JR steel in the case of high stress triaxiality.

References

PN-EN 1993-1-10:2005 Eurocode 3 - Design of Steel Structures - Material Toughness and Through-thickness Properties.
Search in Google Scholar
Sedlacek G., Feldmann M., Kühn B., Tschickardt D., Höhler S., Müller C., Hensen W., Stranghöner N., Dahl W., Langenberg P., Münstermann S., Brozetti J., Raoul J., Pope R., Bijlaard F.: Commentary and Worked Examples to EN 1993-1-10 "Material toughness and through thickness properties" and other toughness oriented rules in EN 1993, JRC Scientific and Technical Reports, European Commission Joint Research Centre, 2008.
Search in Google Scholar
Kossakowski P.G: An analysis of the load-carrying capacity of elements subjected to complex stress states with a focus on the microstructural failure. Archives of Civil and Mechanical Engineering 10 (2010), pp. 15-39.10.1016/S1644-9665(12)60048-X
Search in Google Scholar
Kossakowski P., Trąmpczyński W.: Numerical simulation of damage of steel S235JR including the influence of microstructural damage. Mechanical Review (Przegląd Mechaniczny) 4 (2011) (in Polish), p. 15-22.
Search in Google Scholar
Simulation of ductile fracture of S235JR steel using computational cells with microstructurally-based length scales. Journal of Theoretical and Applied Mechanics 50 (2012), pp. 589-607.
Search in Google Scholar
Kossakowski P.: Simulation of the plastic range work of structural steel in a complex stress state on the model Gursona-Tvergaarda-Needleman. Building Review (Przegląd Budowlany) 3 (2012), (in Polish), p. 43-49.
Search in Google Scholar
Gurson A.L.: Continuum Theory of Ductile Rupture by Void Nucleation and Growth: Part I - Yield Criteria and Flow Rules for Porous Ductile Media. Journal of Engineering Materials and Technology, Transactions of the ASME 99 (1977), pp. 2-15.10.1115/1.3443401
Search in Google Scholar
Tvergaard V.: Influence of Voids on Shear Band Instabilities under Plane Strain Condition, International Journal of Fracture 17 (1981), pp. 389-407.10.1007/BF00036191
Search in Google Scholar
Tvergaard V., Needleman A.: Analysis of The Cup-Cone Fracture in a Round Tensile Bar, Acta Metallurgica 32 (1984), pp. 157-169.
Search in Google Scholar
Needleman A., Tvergaard V.: An Analysis of The Ductile Rupture in Notched Bars, Journal of the Mechanics and Physics of Solids 32 (1984), pp. 461-490.
Search in Google Scholar
Cordigliano A., Mariani S., Orsati B.: Identification of Gurson-Tvergaard material model parameters via Kalman filtering technique. I. Theory. International Journal of Fracture, 104 (2000), pp. 349-373.
Search in Google Scholar
Tvergaard V.: Material failure by void growth to coalescence. Advanced in Applied Mechanics 27 (1989), pp. 83-151.10.1016/S0065-2156(08)70195-9
Search in Google Scholar
Faleskog J., Gao X., Shih C.F.: Cell model for nonlinear fracture analysis - I. Micromechanics calibration. International Journal of Fracture 89 (1998), pp. 355-373.
Search in Google Scholar
PN-EN 10002-1:2001 Metallic Materials - Tensile Testing - Part 1: Method of Test at Ambient Temperature.
Search in Google Scholar
Abaqus 6.10 Analysis User's Manual, Dassault Systèmes, 2010.
Search in Google Scholar

The analysis of influence of Tvergaard's parameters on S235JR steel response in high stress triaxiality

Abstract

Paradigm

My account