Have a personal or library account? Click to login
Splat formation and degradation of hydroxyapatite during plasma spraying process Cover

Splat formation and degradation of hydroxyapatite during plasma spraying process

By: Manoj Mittal,  S. Nath and  Satya Prakash  
Open Access
|Jul 2011

References

  1. Rossnagel S. M. Cuomo J. J. Westwood W. D.: Handbook of plasma processing technology: fundamentals, etching, deposition and surface interaction, Noyes Publication, Park Ridge, N.J 1990.
  2. Golant V. E. Zhilinsky A. P. Sakharov I. E. Brown S. C.: Fundamental of plasma physics, Wiley, New York 1980.
  3. Leung K. Heberlein J. Pfender E.: Particle trajectory control with the use of different carrier gases, Proc. of 8th National Thermal Spray Conference on Thermal Spray Science and Technology, (ed.) Berndt C. C. Sampath S., Houston, Texas, 1995.
  4. Wolke J. G. C. Klein C. P. A. T. de Groot K.: Bioceramics for maxillofacial applocattions, bioceramic and the human body, (ed.) Ravaglioli A. Krajewski A. Elsevier, Amsterdam, 199110.1007/978-94-011-2896-4_21
  5. Fauchais P.: Understanding plasma spraying, J. Physics: Applied Physics, 37 (2004), R8610.1088/0022-3727/37/9/R02
  6. Pawlowski L.: The science and engineering of thermal spray coatings, Wiley, New York 1995.
  7. Dyshlovenko S. Pateyron B, Pawlowski L. Murano D.: Numerical simulation of hydroxyapatite powder behavior in plasma jet, Surf. Coat. Technol., 179 (2004), 110-117.10.1016/S0257-8972(03)00799-0
  8. Tong W. Yang Z. Zhang X. Yang A. Feng J. Cao Y. Chen J.: Studies of diffusion maximum in x-ray diffraction pattern of plasma-sprayed hydroxyapatite coatings, J. Biomed. Mater. Res., 40 (1998), 407-413.10.1002/(SICI)1097-4636(19980605)40:3<;407::AID-JBM10>3.0.CO;2-G
  9. Oosterbos C. J. M. Rahmy A. I. A. Tonino A. J. Witpered W.: High survival rate of hydroxyapatite-coated hip prostheses 100 consecutive hips followed for 10 years, Acta Orthop. Scand., 75 (2004), 127-133.10.1080/00016470412331294365
  10. Fantassi S. Vardelle M. Fauchais P. Moreau.: Investigation of the splat formation versus different particulate temperature and velocities prior to impact, Proc. Thermal Spray: International Advances in Coatings Technology, (ed.) Berndt. C. C., 13th International Thermal Spray, Orlando, Florida 1992
  11. Yankee S. J. Pletka B. J.: Microstructural analysis of impacted hydroxyapatite droplets, Proc. Thermal Spray: International Advances in Coatings Technology, (ed.) Berndt C. C. 13th International Thermal Spray, Orlando, Florida, 1992
  12. Tong W. Yang Z. Zhang X. Yang A. Feng J. Cao Y Chen J.: Studies on diffusion in x-ray diffraction patterns of plasma sprayed hydroxyapatite coatings, J. Biomed. Mater. Res. Vol. 40 (1998), 407-413.10.1002/(SICI)1097-4636(19980605)40:3<;407::AID-JBM10>3.0.CO;2-G
  13. Le Geros R. Z. Le Geros, J. P.: Dense Hydroxyapatite, An introduction to bioceramics, (ed.), Hench L. L. Wilson J. World Scientific, London, 1993, 139-18010.1142/9789814317351_0009
  14. Ji H. Pinton C. B. Marquis P. M.: Microstructural characterization of hydroxyapatite coatings on titanium, J. Mater. Sci.-Mater. Med., 3, (1992), 283
  15. Sun L. Christopher Bernd, C.C. Grey C.P.: Phase, structural and microstructural investigations of plasma spray hydroxyapatite coatings, Mater. Sci. Eng. A, 36 (2003), 40-84.
  16. Liao C. Lin F. Chen K. Sun J.: Thermal decomposition and reconstitution of hydroxyapatite in air atmosphere, Biomaterials, 20 (1999), 1807-1813.10.1016/S0142-9612(99)00076-9
  17. Sridhar T. M. Kamachi Mudali U. Subbaiyan M.: Sintering atmosphere and temperature effect on hydroxyapatite coated type 316l stainless steel, Corros. Sci., 45 (2003) 2337-2359.10.1016/S0010-938X(03)00063-5
  18. Heimann R. B.: Thermal spraying of biomaterials", Surf. Coat. Technol., 201 (2006), 2012-2019.10.1016/j.surfcoat.2006.04.052
  19. Fang Y. Agrawal D. K. Roy D. M.: Thermal stability of hydroxyapatite, hydroxyapatite and related material, (ed.) Brown P. W. and Constantz B. CRC Press, London, 1994
  20. Park E. Condrate Sr. R. A. Lee D. Kociba K. Gallagher P. K.: Characterization of hydroxyapatite: before and after plasma spraying, J. Mater. Sci. Mater. Med., 13 (2002), 211-218.10.1023/A:1013842415784
  21. Tampieri A. Celotti G. Sprio S. Mingazzini C.: Characterization of synthatic hydroxyapatite and attempt to improve their thermal stability, Mater. Chem. Phys., 64 (2000), 54-61.10.1016/S0254-0584(99)00252-7
  22. Lazic S. Zee S. Miljevic N. Milonjic S.: The effect of temperature on the properties of hydroxyapatite precipitated from calcium hydroxide and phosphoric acid, Thermochim. Acta, 374 (2001), 13-22.10.1016/S0040-6031(01)00453-1
  23. Deram V. Minichiello R. Le Maguer A. Pawlowski L. Murano D.: Microstructural characterization of plasma sprayed hydroxyapatite coatings, Surf. Coat. Technol., 166 (2003), 153-159.10.1016/S0257-8972(02)00855-1
  24. Klein C. P. A. T. Wolke J. G. C. de Groot K.: Stability of calcium phosphate ceramics and plasma spary coating, ‘In’ An Introduction to Bioceramic, (ed.) Hench L. L. Wilson J. World Scientific, London, 192-221, 199310.1142/9789814317351_0011
DOI: https://doi.org/10.2478/v10077-011-0008-6 | Journal eISSN: 2083-4799 | Journal ISSN: 1730-2439
Language: English
Page range: 26 - 36
Published on: Jul 12, 2011
In partnership with: Paradigm Publishing Services
Publication frequency: 4 issues per year

© 2011 Manoj Mittal, S. Nath, Satya Prakash, published by Gdansk University of Technology
This work is licensed under the Creative Commons License.

Volume 11 (2011): Issue 2 (June 2011)