References
- Tang H. C., Cheng F. T., Man H. C.: Effect of surface melting on corrosion and cavitation erosion behaviors of manganese-nickel-aluminium bronze, Materials Science and Engineering A 373 (2004), 195 - 203.
- Serbiński W., Olive J. M., Rudnicki J.: Laser surface treatment of aluminium-silicon alloy at cryogenic conditions. Advances in Materials Science Vol. 3, nr 1(3), (2003), 51-59.
- Serbiński W., Zieliński A., Dziadoń A., Wierzchoń T.: Structural transformations in syrface areaof Al-Si alloy caused with laser remelting under low temperature conditions. Inżynieria Materiałowa, 2005, vol. 26, nr 5, 291-302.
- Jażdżewska M., Zieliński A., Dziadoń A.: The possibility of and use of laser treatment to improve the behaviour of the Ti-6Al-4V alloy. Inżynieria Biomateriałów 9 (2006) 121-123.
- Skalski I, Serbiński W., Majkowska B.: Corrosion tests of laser remelted AlSi13Mg1CuNi alloy exposed in 0.01M H2SO4 water solution. Materiały i Technologie 2(2) 2004, 159-162.
- Zieliński A., Serbiński W., Kamiński J., Wierzchoń T.: Laser remelting of highly precolled Al-Si alloys as a method of their corrosion resistance increasing. Ochrona przed Korozją 47 (2004) nr 11s/A, 72-75.
- Majkowska B., Skalski I., Serbiński W.: Microstructural aspects of corrosion of the SUPERSTON alloy after laser treatment. Advances in Materials Science, vol. 7, iss. 2=12 (2007), 141-146.
- Serbiński W., Majkowska B.: Microstructure and corrosion properties of the laser treated SUPERSTON alloy. Journal of Achievements in Materials and Manufacturing Engineering, vol. 18, iss. 2/2 (2006), pp. 415-418
- Zieliński A., Jażdżewska M., Narożniak-Łuksza A., Serbiński W.: Surface structure and properties of Ti6Al4V alloy laser melted at cryogenic conditions. Journal of Achievements in Materials and Manufacturing Engineering 17 (2006) 423-426.
- Skalski I.: Computer software for polarisation data analysis. CTO's internal publication, RO-00/T-049, 2000.
- Jażdżewska M., Zieliński A., Skalski I., Dziadoń A.: _New laser-enhanced surface treatment of Ti bioalloy. Advances in Materials Science 7 (2007) 295-299.