References
- Weckenmann, A., Estler, T., Peggs, G., McMurtry, D. (2004). Probing systems in dimensional metrology. CIRP Annals-Manufacturing Technology, 53 (2), 657-684.10.1016/S0007-8506(07)60034-1
- Woźniak, A., Dobosz, M. (2005). Influence of measured objects parameters on CMM touch trigger probe accuracy of probing. Precision Engineering, 29 (3), 290-297.10.1016/j.precisioneng.2004.11.009
- Woźniak, A., Mayer, J. R. R., Bałaziński, M. (2009). Stylus tip envelop method: corrected measured point determination in high definition coordinate metrolog. Int. Journal of Advanced Manufacturing Technology, 42, 505-514.10.1007/s00170-008-1615-1
- Wu, Y., Liu, S., Zhang, G. (2004). Improvement of coordinate measuring machine probing accessibility. Precision Engineering, 28 (1), 89-94.10.1016/S0141-6359(03)00080-1
- Park, J.-J., Kwon, K., Cho, N. (2006). Development of a coordinate measuring machine (CMM) touch probe using a multi-axis force sensor. Measurement Science and Technology, 17, 2380-2386.10.1088/0957-0233/17/9/002
- Hermann, G. (2007). Geometric error correction in coordinate measurement. Acta Polytechnica Hungarica, 4 (1), 47-62.
- Schwenke, H., Knapp, W., Haitjema, H., Weckenmann, A., Schmitt, R., Delbressine, F. (2008). Geometric error measurement and compensation of machines-an update. CIRP Annals-Manufacturing Technology, 57, 660-675.10.1016/j.cirp.2008.09.008
- Genest, D. H. (1997). The right probe system adds versatility to CMMs. Quality Digest, http://www.qualitydigest.com/jan97/probes.html http://www.qualitydigest.com/jan97/probes.html
- Dobosz, M., Woźniak, A. (2005). CMM touch trigger probes testing using a reference axis. Precision Engineering, 29 (3), 281-289.10.1016/j.precisioneng.2004.11.008
- Zeiss Calypso Navigator (2004). CMM Operation Instructions and Training Manual. Revision 4.0. Oberkochen, Germany: Carl Zeiss Co.
- Ali, S. H. R. (2008) The Influence of fitting algorithm and scanning speed on roundness error for 50 mm standard ring measurement using CMM. Journal of Metrology & Measurement Systems, 15 (1), 31-53.
- Kasparaitis, A., Šukys, A. (2006). Dynamic errors of CMM probes. Solid State Phenomena: Mechatronic Systems and Materials, 113, 477-482.10.4028/www.scientific.net/SSP.113.477
- Ali, S. H.R, Mohamed, H. H., Bedewy, M. K. (2009). Identifying cylinder liner wear using precise coordinate measurements. Int. Journal of Precision Engineering and Manufacturing, 10 (5), 19-25.10.1007/s12541-009-0088-y
- Lin, Y. C., Sun, W. I. (2003). Probe radius compensated by the multi-cross product method in free form surface measurement with touch trigger probe CMM. Int. Journal of Advanced Manufacturing Technology, 21, 902-909.10.1007/s00170-002-1413-0
- Li, L., Jung, J.-Y., Lee, CH.-M., Chung, W.-J. (2003). Compensation of probe radius in measuring freeformed curves and surface. Int. Journal of the Korean Society of Precision Engineering, 4 (3).
- Xiong, Z., Li, Z. (2003). Probe radius compensation of workpiece localization. Transactions of the ASME, 125, 100-104.10.1115/1.1537260
- Ali, S. H. R. (2010). Two dimensional model of CMM probing system. Journal of Automation, Mobile Robotics & Intelligent Systems, 4 (2), 3-7.
- Sokovic, M., Cedilnik, M., Kopac, J. (2007). Identification of scanning errors using touch trigger probe head. Journal of Achievements in Materials and Manufacturing Engineering, 20 (1-2), 383-386.
- Estler, W. T., Phillips, S. D., Borchardt, B., Hopp, T., Witzgall, C., Levenson, M., Eberhardt, K., McClain, M., Shen, Y., Zhang, X. (1996). Error compensation for CMM touch trigger probes. Precision Engineering, 19 (2), 85-97.10.1016/S0141-6359(96)00040-2
- Pereira, P. H., Hocken, R. J. (2007). Characterization and compensation of dynamic errors of a scanning coordinate measuring machine. Precision Engineering, 31(1), 22-32.10.1016/j.precisioneng.2006.01.006
- Hessling, J. P. (2008). Dynamic metrology - an approach to dynamic evaluation of linear timeinvariant measurement systems. Measurement Science and Technology, 19 (8).10.1088/0957-0233/19/8/084008
- Farooqui, A., Morse, P. (2007). Methods and artifacts for comparison of scanning CMM performance. Transactions of the ASME, 7, 72-80.10.1115/1.2709928
- Kosarevsky, S., Latypov, V. (2010). Inertia compensation while scanning screw threads on coordinate measurement machines. Measurement Science Review, 10 (2), 68-71.
- Yagüe, J.-A., Albajez, J.-A., Velázquez, J., Aguilar, J.-J. (2009). A new out-of-machine calibration technique for passive contact analog probes. Measurement, 42, 346-357.10.1016/j.measurement.2008.07.006
- Zhao, J., Fei, Y. T., Chen, X. H., Wang, H. T. (2005). Research on high-speed measurement accuracy of coordinate measuring machines. Journal of Physics: Conference Series, 13, 167-170.10.1088/1742-6596/13/1/039
- Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 2: CMMs used for measuring linear dimensions. (2009). Standard ISO 10360-2.
- Beaman, J., Morse, E. (2010). Experimental evaluation of software estimates of task specific measurement uncertainty for CMMs. Precision Engineering, 34, 28-33.10.1016/j.precisioneng.2009.08.006