References
- Kundur, P. (1993). Power System Stability and Control. Power System Engineering Series. McGraw-Hill.
- Anderson, P. M., Fouad, A. A. (1994). Power System Control and Stability. IEEE Power System Engineering Series. IEEE Press.
- Girgis, G. K., Vu, H. D. (1995). Verification of limiter performance in modern excitation control systems. IEEE Trans. on Energy Conversion, 10 (3), 538-542.10.1109/60.464879
- Eberly, T. W., Schaefer, R. C. (1995). Minimum/maximum excitation limiter performance goals for small generation. IEEE Trans. on Energy Conversion, 10 (4), 714-721.10.1109/60.475844
- Ramos, A. J. P., Lins, L. R., Fittipaldi, E. H. D., Monteath, L. (1997). Performance of under excitation limiter of synchronous machines for system critical disturbances. IEEE Trans. on Power Systems, 12 (4), 1702-1707.10.1109/59.627879
- Working group of the excitation systems subcommittee. (1995). Underexcitation limiter models for power system stability studies. IEEE Trans. on Energy Conversion, 10 (3), 524-531.10.1109/60.464877
- Sumina, D., Bulić, N., Erceg, I. (2010). Three-dimensional power system stabilizer. Electric Power Systems Research, 80 (7), 886-892.10.1016/j.epsr.2009.12.014
- Chapman, J. W., Ilic, M. D. King, C. A. (1993). Stabilizing a multimachine power system via decentralized feedback linearizing excitation control. IEEE Trans. on Power Systems, 8 (3), 830-839.10.1109/59.260921
- Lu, Q., Sun, Y., Xu, Z., Mochizuki, T. (1996). Decentralized nonlinear optimal excitation control. IEEE Trans. on Power Systems, 11 (4), 1957-1962.10.1109/59.544670
- Redfern, M. A., Checksfield, M. J. (1995). A new pole slipping protection algorithm for dispersed storage and generation using the equal area criterion. IEEE Trans. on Power Delivery, 10, 194-202.10.1109/61.368398
- Barrera-Cardiel, E., Pastor-Gomez, N. (1999). Microcontroller-based power-angle instrument for a power systems laboratory. In Proceedings of the IEEE Power Engineering Society: Summer Meeting. IEEE, 1008-1012.10.1109/PESS.1999.787454
- Chen, Y., Zhang, C., Hu, Z., Wang, X. (2000). A new approach to real time measurement of power angles of generators at different locations for stability control. In Proceedings of the IEEE Power Engineering Society: Winter Meeting. Vol. 2, IEEE, 1237-1242.
- Despalatović, M., Jadrić, M., Terzić, B. (2008). Real-time power angle determination of salient-pole synchronous machine based on air gap measurements. Electric Power System Research, 78 (11), 1873-1880.10.1016/j.epsr.2008.03.013
- Cari, E. P. T., Alberto, L. F. C., Bretas, N. G. (2000). A novel methodology for power angle estimation of synchronous generator based on trajectory sensitivity analysis. In Proceedings of the IEEE Power Engineering Society: Winter Meeting. Vol. 2, IEEE, 1237-1242.
- Del Angel, A., Geurts, P., Ernst, D., Glavic, M., Wehenkel, L. (2007). Estimation of rotor angles of synchronous machines using artificial neural networks and local PMU-based quantities. Neurocomputing, 70 (16-18), 2668-2678.10.1016/j.neucom.2006.12.017
- Ghahremani, E., Karrari, M., Malik, O. P. (2008). Synchronous generator third-order model parameter estimation using online experimental data. IET Generation, Transmission & Distribution, 2 (5), 708-719.10.1049/iet-gtd:20080175
- Idzotic, T., Erceg, G., Sumina, D. (2004). Load angle estimation of a synchronous generator. In IEEE Mediterranean Electrotechnical Conference. Vol. 3, IEEE, 893-896.10.1109/MELCON.2004.1348098
- Vicol, L., Tu Xuan, M., Wetter, R., Simond, J.-J., Viorel, I. A. (2006). On the identification of the synchronous machine parameters using standstill DC decay test. In ICEM 2006: International Conference on Electrical Machines.
- Malarić, K., Malarić, R., Hegeduš, H. (2008). Gauss Newton curve fitting. http://sourceforge.net/projects/gauss-newton/
- National Instruments: CompactRIO. http://www.ni.com/compactrio/about.htm