References
- Oyama, T., (1996). "The chemistry of transition metal carbides and nitrides," London, Chapman and Hall.
- Storms, E. K., (1967). The Refractory Carbides, Academic Press, New York.
- Toth, L. E., (1971). Transition Metal Carbides and Nitrides, Academic Press, New York.
- Choi, J., Brenner, J. & Thompson, L. (1995). Pyridine Hydroenitrogenation Over Molybdenum Carbide Catalysts, Journal of Catalysis, 154, 33-40. DOI:10.1006/jcat.1995.1143.
- Oyama, S. T., Schlatter, J. C., Metclafe, J. E. & Lambert, J. M., (1988). Preparation and Characterization of Early Transition-Metal Carbides and Nitrides, Ind. Eng. Chem. Res., 27, 1639-1648. DOI: 10.1021/ie00081a013.
- Gu, Y., Li, L., Chen, Z., Yang, Y. & Qian, Y., (2003). Synthesis of nanocrystalline Mo2C via sodium co-reduction of MoCl5 and CBr4 in Benzene, Mater. Res. Bull., 38, 1119-1122. DOI:10.1016/S0025-5408(03)00132-6.
- Hyeon, T., Fang, M. & Suslick, K., (1996). Nanostructured Molybdenum Carbide: Sonochemical Synthesis and Catalytic Properties, J. Am. Chem. Soc., 118, 5492-5493. DOI: 10.1021/ja9538187.
- Mcgee, R., Bej, S. & Thompson, L., (2005). Basic properties of molybdenum and tungsten nitride catalysts, Appl. Catal. A., 284, 139-146. DOI:10.1016/j.apcata.2005.01.029.
- Weimer, A. (1997). Carbide, Nitride and Boride Materials Synthesis and Processing, New York, Chapman and Hall.
- Giordano, C., Erpen, C., Yao, W. & Antoniettin, M., (2008). Synthesis of Mo and W Carbide and Nitride Nanoparticles via a Simple "Urea Glass" Route, Nano Lett., 8, 4659-4663. DOI: 10.1021/nl8018593.
- Patel, M. & Subrahmanyam, J., (2008). Synthesis of nanocrystalline molybdenum carbide (Mo2C) by solution route, Mater. Res. Bull., 43, 2036-2041. DOI:10.1016/j.mater-resbull.2007.09.025.
- Keller, N., Pietruszka, B. & Keller, V. (2006). A new one-dimensional tungsten carbide nanostructured material, Mater. Lett., 60, 1774-1777. DOI:10.1016/j.matlet.2005.12.017.
- Singh, R. P., (2008). Synthesis and characterization of tungsten carbide nanoparticles. School of Physics & Materials Science, MS Thesis., Thapar University, Patiala.
- Yamada, K., (2000). Synthesis of tungsten carbide by dynamic shock compression of a tungsten-acetylene black powder mixture, J. Alloy Compd., 305, 253-258. DOI:10.1016/ S0925-8388(00)00700-3.
- Kurishita, H., Matsuso, S., Arakawa, H., Hirai, T., Linke, J., Kawai, M. & Yoshida, N. (2009). Development of nano-structured W and Mo materials, Adv. Mater. Res., 59, 18-30. DOI: 10.4028/www.scientific.net/AMR.59.18.
- de Medeiros, F. F. P., da Silva, A. G. P., de Souza, C. P. & Gomes, U. U., (2009). Carburization of Ammonium Paratungstate by Methane: The influence of Reaction Parameters, Int. J. Refract. Metals and Hard Materials., 27, 43-47. DOI:10.1016/j.ijrmhm.2008.03.001.
- Reddy, K. M., Rao, T. N., Radha, K. & Joardan, J. (2010). Nanostructured Tungsten Carbides by Thermochemical Processing, J. Alloys and Compounds., 494, 404-409. DOI:10.1016/j.jallcom.2010.01.059.
- Cetinkaya, S. & Eroglu, S. (2011). Comparative Kinetic & Structural Analysis of Nanocrystalline WC Powder Synthesis from Pre-reduced W under Pure and Diluted CH4 Atmospheres, Int. J. Refract. Metals and Hard Materials., 29, 214-220. DOI:10.1016/j.ijrmhm.2010.10.009.
- Oyama, S. T. (1981). "Ammonia synthesis and decomposition on molybdenum and its interstitial alloys." PhD Dissertation, Stanford University, Stanford, CA.
- Kanervo, J. (2003). "Kinetic analysis of temperature programmed reactions." PhD Dissertation, Helsinki University of Technology.
- Knotzinger, H. (1997). "Temperature-programmed reduction, In Handbook of Heterogeneous Catalysis," Eds. Etrl, G., Knozinger, H., Weitkamp, J., Vol 2, VCH, Weinheim, pp 676.
- Bhatia, S., Beltramini, I. & Do, D. D. (1990). "Temperature-programmed analysis and its applications in catalytic systems." Catal. Today, 7, 309-438.
- Jones, A. & McNicol, B. (1986). "Temperature-programmed reduction for solid materials characterization." Marcel Dekker Inc., New York.
- Lemaitre, J. L. (1984). "Temperature-programmed methods, in characterization of heterogeneous catalysts." Ed. Delannay, F., Marcel Dekker, Inc., New York, pp 29-70.
- Hurst, N. M., Gentry, S. J. & Jones, A. (1982). "Temperature - programmed desorption and reduction." Catal. Rev. -Sci. Eng., 24, 233-309.
- Kanervo, J. M. & Krause, A. O. I. (2001) "Kinetic Analysis of temperature programmed reduction: behavior of a CrOx/ Al2O3 Catalyst." J. Phys. Chem. B, 105, 9778-9784.
- Rudy, E., Windish, S., Stosick, A. & Hoffman, J. (1967). Revision of the Titanium-Tungsten System, Trans TMS-AIME., 239, 1247-1267.
- Oyama, S. T., Schlatter, J., Metcalfe, J. & Lambert, J. (1988). Preparation and characterization of early transition metal carbides and nitrides, Ind. Eng. Chem. Res., 27, 1639-1648. DOI: 10.1021/ie00081a013.
- Kapoor, R. & Oyama, S. T. (1997). Measurement of solid state diffusion coefficients by a temperature-programmed method, J. Mater. Res., 12, 467-473. DOI: 10.1557/JMR.1997.0068.
- Redhead, P. A., (1962). Thermal Desorption of Gases, Vacuum., 12, 203-211. DOI:10.1016/0042-207X(62)90978-8.