References
- Bledzki, A. & Gassan, J. (1999), Composites reinforced with cellulose fibres, Prog. Polymers. Sci., 24, 221-274
- Khan, F. & Ahmad, S. R., (1996), Chemical modification and spectroscopic analysis of jute fibre, Pol. Degr. and Satab., 52, 335-340.
- Kalia, S., Kaith, B. S. & Kaur, I., (2009), Pretreatments of natural fibers and their application as reinforcing material in polimer composites: a review, Pol. Eng. and Sci., 49, 1253-1272, DOI: 10.1002/pen.21328.
- Sticchi, A. & Lauke, B., (2007), A novel fiber treatment applied to woven jute fabric/ vintlester laminates, Comp.: Part A, 38, 1337-1343, DOI: 10.1016/j.compositesa.2006.10.010.
- Pietak. A., Korte. S., Tan. E., Downard. A. & Staiger. M. P., (2007), Atomic force microscopy characterization of the surface wettability of natural fibres, Appl. Surf. Sci., 253, 3627-3635, DOI: 10.1016/j.apsusc.2006.07.082.
- Sinha, E., Rout, S. K., (2009), Influence of fibre-surface treatment on structural, thermal and mechanical properties of jute fibre and its composite, Bull. Mater. Sci., 1, 65-76.
- van de Weyenberg, I., Chitruong, T., Vangrimde, B. & Verpoest, I., (2006), Improving the properties of UD flax fibre reinforced composites by applying an alkaline fibre treatment, Comp.: Part A, 37, 1368-1376, DOI: 10.1016/j.compositesa.2005.08.016.
- Qin, C., Soykeabkaew, N., Xiuyuan, N. & Pejs, T., (2008), The effect of fiber volume fraction and mercerization on the properties of all - cellulose composites, Carboh. Pol., 71, 458-467, DOI: 10.1016/j.carbpol.2007.06.019.
- Gassan, J., (1997), Natural fiber-reinforced plastics - Correlation between structure and properties of the fibers and the resultat composites, Unpublished doctoral dissertation, University of Kassel, Kassel, Germany.
- Manisikkamaki, P., Lahtinen, M. & Rissanen, K., (2007), The conversion from cellulose I to cellulose II In NaOH mercerization performer in alcohol water system: X - Ray powder diffraction study, Carboh. Pol., 68, 35-43, DOI: 10.1016/j.carbpol.2006.07.010.
- Podgorski, L., Chevet, B., Onic, L. & Merlin, A. H., (2000), Modification of wood wettability by plasma and corona treatments, Int. Jour. of Adh. & Adh., 20, 103-111.
- Topalovic, T., Nierstrasz, V. A., Bautista, L., Jocic, D., Navarro, A., Warmoeskerken, M. M. C. G., (2007), XPS and contact angle study of cotton surface oxidation by catalytic bleaching, Coll. and Sur. A: Phys. Eng. Asp., 296, 76-85, DOI: 10.1016/j.colsurfa.2006.09.026.
- Corrales, F., Vilaseca, F., Llop, M., Girones, J., Mendez, J. A., Mutj, P., (2007), Chemical modification of jute fibers for the production of green-composites, J. of Haz. Mat., 144, 730-735, DOI: 10.1016/j.jhazmat.2007.01.103.
- Karmakar, S. R. (1999), Chemical technology in the pre-treatment processes of textiles, Elsevier Science & Technology, Netherlands.
- Ray, D., Das, M. & Mitra, D. (2009), Influence of alkali - treatment on creep properties and crystallity of jute fibers, Bioresources, 4, 730-739.
- Gassan, J. & Bledzki, A., (1999), Alkali treatment of jute fibers: relationship between structure and mechanical properties, J. of Appl. Pol. Sci., 71, 623-629.
- Mwaikambo, L. Y. & Ansell, M. P., (1999), The effect of chemical treatment on the properties of hemp, sisal, jute and kapok fibers for composite reinforcement, 2nd International Wood and Natural Fibre Composites Symposium, 28-29 June 1999 (pp. 41-46). Kassel, Germany.