Waste management of half-finished products and thermosetting wastes
By: Sławomir Leszczyński and Beata Brzychczyk
Open Access
|Nov 2007References
- Bledzki A.: (), Recycling of Polymeric Materials, WNT, Warsaw (in Polish).
- GUS (), Industry Statistical Yearbook, Warsaw
- Plastics Waste Management Institute (), Plastics Recovery in Perspective, Report, Plastics Waste Management Institute, Brussels.
- Zevenhoven R.: et al. (), Laboratory Scale Characterisation of Plastics Derived Fuel, Report 95/3, Abo Akademi, Department of Chemical Engineering, Finland
- Hornbogen E., Bode R., Dooner P.: (), Recykling Materialwissenschaftliche Aspekte, Berlin-Haidelberg.
- Pickering S. J., Benson M.: (), The Recycling of Thermosetting Plastics, Plastic Recycling Meeting, London.
- Koszkul J (), Polymer Materials, Wyd. Politechniki Częstochowskiej, Częstochowa.
- Lewis F. M.: (), Thermodynamic Fundamentals for the Pyrolysis of Refuse, Solid Waste Processing Conference, Boston.
- Burney S. J. (), Combustion of Densified Refuse Derived Fuel, ETSU Report.
- Zelkowski J.: (), Burnout Behaviour of Two Coal and PE Foil Waste, Report for the Spanish Federation of Polymer Producers, University Clausthal Zellerfeld, Clausthal.
- Kozaczka J., Horbaj P.: (), Computation of combustion and gasification processes. Gaswärme International, No. 6.
DOI: https://doi.org/10.2478/v10026-007-0070-3 | Journal eISSN: 3072-0389 (formerly 1899-4741) | Journal ISSN: 1509-8117
Language: English
Page range: 122 - 126
Published on: Nov 6, 2007
Published by: West Pomeranian University of Technology, Szczecin
In partnership with: Paradigm Publishing Services
Publication frequency: Volume open
Related subjects:
© 2007 Sławomir Leszczyński, Beata Brzychczyk, published by West Pomeranian University of Technology, Szczecin
This work is licensed under the Creative Commons License.