Dynamic properties of 7000 - series aluminum alloys at large strain rates

Jurczak, Wojciech; Kyzioł, Lesław

doi:10.2478/v10012-012-0005-7

Abstract

This paper presents test results of mechanical properties of EN AW-AlZn5Mg1Zr and EN AW-AlZn5Mg1, 5CuZr aluminum alloys for various tensile strain rates. Static tests were conducted with the use of MTS 810.12 tension test machine, and dynamic tests - with RSO rotary impact test machine. The work was aimed at determination of effects of strain rate and notch geometry of specimens on their material mechanical properties and damage mechanisms.

References

Levedahl W., Capable A.: Affordable 21^st - Century Destroyer. Naval Engineers Journal. May 199310.1111/j.1559-3584.1993.tb02741.x
Search in Google Scholar
Jurczak W.: Influence of chemical composition and heat treatment on mechanical properties and corrosion resistance of Al-Zn-Mg alloys applicable to welded ship structures (in Polish). Doctoral thesis, Gdańsk University of Technology, 1998.
Search in Google Scholar
Cudny K., Powierża Z.: Selected problems of impact strength of ships (in Polish). Printed course lectures, Polish Naval University, Gdynia, 1978.
Search in Google Scholar
Wiśniewski A.: Armours - construction, design and tests (in Polish). WNT (Scientific Technical Publishing House), Warsaw, 2001.
Search in Google Scholar
Dobrociński St., Fila J., Jurczak W., Kolenda J.: Impact and ballistic strength of a novel Al-alloy and its composites (in Polish). Report on "BALIDUR" research project, Polish Naval University, Gdynia, 2001.
Search in Google Scholar
Kinslov R. at al.: High-Velocity Impact Phenomena. Academic Press, New York and London, 1970
Search in Google Scholar
Fila J.: Research on influence of loading state and strain rate on strength and toughness of ship materials (in Polish). The conference on" Impact strength of structures", Polish Naval University, Gdynia, 1993.
Search in Google Scholar
Fila J., Zatorski Z. at al.: Reports: No. 1/1993, No.1/94 and No. 2/95/IPBMO / "Powłoka" - AMW-KBN, 1993÷5, AMW Gdynia, str. 216.
Search in Google Scholar
Material certificate of AlZn5Mg2CrZr alloy, IMN-OML Skawina nr 4550/91, 336 OML/91.
Search in Google Scholar
Kyzioł L.: Dynamic characteristics of materials intended for marine structures (in Polish). Report on "KONSTRUKTOR" research project, 3^rd phase, Polish Naval University, Gdynia, 2004, (unpublished).
Search in Google Scholar
Han Zheng, Ze - Ping Wang: Spall damage in aluminium alloy. International Journal Solids and Structures, 32 (1995) 1135÷148.
Search in Google Scholar
Johnson J. N.: Dynamic fracture and spallation in ductile solids, Journal Applied Physics, 52 (1981) 2812÷824.
Search in Google Scholar
Lewiński T., Sokołowski J.: Energy change due to the appearance of cavities in elastic solids, International Journal of Solids and Structures, 40 (2003) 1765÷803.
Search in Google Scholar
Zukas J. A.: High velocity impact dynamics. John Willey & Sons Inc. U. K., 1990.
Search in Google Scholar
Bugłacki H.: Influence of thermal treatment and chemical content of filler metals on mechanical properties and stress corrosion of AlZn5Mg1 alloy used for welded ship structures (in Polish). Doctoral thesis. Gdańsk University of Technology, Gdańsk, 1981.
Search in Google Scholar
Bugłacki H., Jasiński R., Cudny K.: Mechanical properties in function of strain rate for metal alloys used in shipbuilding (in Polish). The conference on "Impact strength of structures", Polish Naval Academy, Gdynia, 1993.
Search in Google Scholar
Cudny K., Puchaczewski N.: Metal alloys for ship hulls and offshore engineering structures (in Polish). Gdańsk University of Technology, Gdańsk, 1995.
Search in Google Scholar
Jasiński R.: Influence of work hardening coefficient on impact properties and limited fatigue strength of aluminum alloys used in ship structures (in Polish). Doctoral thesis. Gdańsk University of Technology, Gdańsk, 1976.
Search in Google Scholar
Perzyna P.: Theory of visco-plasticity (in Polish). PWN (State Scientific Publishers), Warsaw, 1969.
Search in Google Scholar
Perzyna P: Application of visco-plasticity (in Polish). Ossolineum, 1971.
Search in Google Scholar
PN-EN 573-3: Aluminum and its alloys- Chemical composition and kinds of plastically worked products- Part 3: Chemical composition (in Polish).
Search in Google Scholar
PN-EN 515: Aluminum and its alloys-Plastically worked products-Denotation of states (in Polish).
Search in Google Scholar

Dynamic properties of 7000 - series aluminum alloys at large strain rates

Abstract

Paradigm

My account