References
- Wranglen G.: An introduction to corrosion and protection of metals. Department of Electrochemistry and Corrosion Science, Royal Institute of Technology. Stockholm 1970.
- IACS Unified Requirements Z 10.1: Rev. 12, June 2004.
- IACS Recommendation Nr. 87: Guidelines for coating maintenance & repairs for ballast tanks and combined cargo/ballast tanks on oil tankers.
- ASM Handbook: Volume 13. Corrosion. ASM International 1987.
- Piero Caridis: Inspection, repair and maintenance of ship structures. Witherby Publishers, London 2001.
- IACS Unified Requirements W11: Normal and higher strength hull structural steels. Rev. 2004.
- Guidelines for the inspection and maintenance of double hull tanker structures. TSCF 1995.
- TÜV Austria: Corrosion testing of ships. CORRSHIP Project of 5th FPEU, 2003-2006.
- Vallen Systeme GmbH: AMSY5 Specification. The Acoustic Emission Company. Icking, Germany.
- Eliasson J.: Economic of coating/corrosion protection of ships selecting the correct type of anticorrosion protection for underwater applications on new buildings. Lloyd's List events Conference "Prevention and Management of Marine Corrosion", London, April 2003.
- Buglacki H., Smajdor M.: Possibilities of Acoustic Emission (AE) application to assessment of hull plates and tanks of ships. CORRET Project, Gdańsk University of Technology, Gdańsk, 2007.
- Buglacki H.: Assessment method of corrosion protection degree of hull structural steel tanks protected by means of coating systems combined of polyurethane layer and concrete filler (Laboratory test method) (in Polish). EUREKA CORRET Project No. 3614 on „Elastic protective coatings for tanks on tankers - an alternative method for adjusting the tankers to environmental protection requirements”. (under supervision of Kozak J.), Gdańsk University of Technology, Faculty of Ocean Engineering and Ship Technology, Gdańsk, 2007.
- Polish Standard no. PN-EN 1330-9:2002: Non-destructive testing — Terminology — Part 9: Terms used in acoustic- emission testing (in Polish). 2002
- ASTM E 1316-96 — Standard Terminology for Nondestructive Examination.
- ASTM E 610-82 - Standard Definitions of Terms Relating to Acoustic Emission.