An analysis of lubricating medium flow through unsymmetrical lubricating gap of conical slide bearing

Mariusz Koprowski

doi:10.2478/v10012-007-0041-x

.blurhash-client-img { display: none !important; }

An analysis of lubricating medium flow through unsymmetrical lubricating gap of conical slide bearing

Polish Maritime Research

Volume 14 (2007): Issue 4 (October 2007)

By: Mariusz Koprowski

Open Access

|Apr 2008

Abstract

This paper presents a computer analysis of lubricating medium flow through unsymmetrical lubricating gap of conical slide bearing. Numerical calculations were carried out with the use of the software Matlab 7.1 and Mathematica 5.2 for example conical slide bearings of different values of cone apex angles of pin and sleeve and set values of relative eccentricity and skewing angle as well as dimensionless bearing length equal to 1.

References

Apanasewicz S., Kazimierski Z., Lewandowski J, Szaniewski A.: The flow of the gas layer between two conical surfaces.Fluid Dynamics Transactions Vol. 5, Part II, PWN, Warszawa 1971
Search in Google Scholar
Burcan J.: Bearing of hyperboloidal sleeve (in Polish). ZEM no. 3-4, 1973
Search in Google Scholar
Fuller D.D.: Theory and practice of lubrication (in Polish). PWT, Warszawa 1960
Search in Google Scholar
Gottwald I., Vieveg R.: Berechnung und Modellversuche an Wasser-und Luftlagern. Zeit. Angewandte Physik Bd. II, H. 11.1950
Search in Google Scholar
Hebda M., Wachal A.: Tribology (in Polish). WNT, Warszawa 1980
Search in Google Scholar
Janiszewski R.: Theoretical analysis of magneto-hydrodynamic flow of lubricating medium through conical slide bearing (in Polish). Doctoral thesis, Lublin University of Technology -Mining & Metallurgy Academy (AGH), Kraków 1980
Search in Google Scholar
Kazimierski Z.: Unsteady flow in thin layer of viscous gas between two non-coaxial cones (in Polish). Publ. of Lodz University of Technology, Heat Machines75, 1972
Search in Google Scholar
Kazimierski Z.: Essentials of fluid mechanics and methods of computer simulation of flow (in Polish). Publ. of Lodz University of Technology, Łrdz 2004
Search in Google Scholar
Koprowski M.: Hydrodynamic models of lubrication of conical slide bearings in magnetic field (in Polish). Trybologia no. 3, 2006
Search in Google Scholar
Majchrzak E., Mochnacki B.: Numerical methods. Essentials of theory, practical aspects and algorithms (in Polish). Publ. of Wrocław University of Technology, 1996
Search in Google Scholar
Szaniewski A.: Flow of viscous incompressible liquid through conical slide bearing gap (in Polish). Publ. of IPP PAN, 15, Warszawa 1970
Search in Google Scholar
Walicki E.: Load carrying capacity of conical slide bearing (in Polish). Scientific Bulletins (Zeszyty Naukowe) no.7, Mechanics and Structures (Mechanika- konstrukcje) 4, Bydgoszcz High School of Engineering (WSI), 1973
Search in Google Scholar
Wierzcholski K.: Flow of non - Newtonian power law lubricant through the conical bearing gap.Acta Mechanica50, 198410.1007/BF01170962
Search in Google Scholar
Wierzcholski K.: Theory of unconventional lubrication of slide bearings (in Polish). Publ. of Szczecin University of Technology (Wydawnictwo Uczelniane Politechniki Szczecińskiej), Szczecin, 1995
Search in Google Scholar
Wierzcholski K., Nowak Z.: Influence of a temperature dependent lubricant consistency on the capacity of a conical journal bearing. Proc. of the Congress on Rheology, Acapulco 1984
Search in Google Scholar