Eddy Current Evaluation of Two-Layer Aircraft Structures with Carbon Fiber Reinforced Polymer Layers on Aluminum Alloy Substrates
References
- Baker A, Dutton S, Kelly D. Composite materials for aircraft structures. 2nd ed. Reston (VA): American Institute of Aeronautics and Astronautics; 2004.
- Pezzuti E, Donnici G. Structural composites for aircraft design. ARPN J Eng Appl Sci. 2014;9(10):1889–98.
- Ozkan D, Gok MS, Karaoglanli AC. Carbon fiber reinforced polymer (CFRP) composite materials, their characteristic properties, industrial application areas and their machinability. Adv Struct Mater. 2020;124:235–53.
https://doi.org/10.1007/978-3-030-39062-4_20 - Othman R, Ismail NI, Pahmi MAAH, et al. Application of carbon fiber reinforced plastics in automotive industry: A review. J Mech Manuf. 2018;1:144–54.
- Pramanik A, Basak A, Dong Y, et al. Joining of carbon fibre reinforced polymer (CFRP) composites and aluminium alloys: A review. Compos Part A Appl Sci Manuf. 2017;101:1–29.
https://doi.org/10.1016/j.compositesa.2017.06.007 - Chen W, Wu D, Wang X, Wang T. A self-frequency-conversion eddy current testing method. Measurement. 2022;195:111129.
https://doi.org/10.1016/j.measurement.2022.111129 - Bachir Bouiadjra B, Benyahia F, Albedah A, Bachir Bouiadjra BA, Khan SM. Comparison between composite and metallic patches for repairing aircraft structures of aluminum alloy 7075-T6. Int J Fatigue. 2015;80:128–35.
https://doi.org/10.1016/j.ijfatigue.2015.05.014 - Bona A. Theoretical and experimental review of applied mechanical tests for carbon composites with thermoplastic polymer matrix. Trans Aerosp Res. 2019;4(257):55–65.
https://doi.org/10.2478/tar-2019-0025 - Siniarski M, Synaszko P, Dragan K. Development of an open-source robotic NDT solution for automated composite repair testing. Fatigue Aircr Struct. 2024;15:146–54.
https://doi.org/10.2478/fas-2023-0009 - Wronkowicz A, Dragan K, Lis K. Assessment of uncertainty in damage evaluation by ultrasonic testing of composite structures. Compos Struct. 2018;203:71–84.
https://doi.org/10.1016/j.compstruct.2018.06.056 - Wronkowicz-Katunin A, Dragan K. Evaluation of impact damage in composite structures using ultrasonic testing. Fatigue Aircr Struct. 2018;10:82–92.
https://doi.org/10.2478/fas-2018-0007 - Montesano J, Fawaz Z, Bougherara H. Use of infrared thermography to investigate the fatigue behavior of a carbon fiber reinforced polymer composite. Compos Struct. 2013;97:76–83.
https://doi.org/10.1016/j.compstruct.2012.09.030 - Lobanov M, Znova VA, Pivtorak VA, Kijanets IV. Diagnostic of composite elements of aircraft structures by electron shearography method [in Russian]. Tech Diagn Non-Destr Test. 2016;2:19–27.
- Katunin A, Wronkowicz-Katunin A, Dragan K. Impact damage evaluation in composite structures based on fusion of results of ultrasonic testing and X-ray computed tomography. Sensors. 2020;20(7):1867.
https://doi.org/10.3390/s20071867 - Hosono Y, Niwa S, Ohashi T, Gotoh Y. Inspection of CFRP plate using electromagnetic force vibration. In: Proceedings of the International Symposium on Applied Electromagnetics and Mechanics (ISEM 2023), Part 2; 2023. Amsterdam: IOS Press; 2025.
https://doi.org/10.3233/SAEM250011 - Nazarchuk Z, Muravsky L, Kuts O. Nondestructive testing of thin composite structures for subsurface defects detection using dynamic laser speckles. Res Nondestr Eval. 2022.
https://doi.org/10.1080/09349847.2022.2049407 - Udpa SS, More PO, editors. Nondestructive testing handbook. 3rd ed. Vol. 5, Electromagnetic testing. Columbus (OH): American Society for Nondestructive Testing; 2004.
- Libby HL. Introduction to electromagnetic non-destructive test methods. New York (NY): Wiley-Interscience; 1971.
- Ostash O, Uchanin V, Semenets O, Holovatyuk Y, Kovalchuk L, Derecha V. Evaluation of aluminium alloys degradation in aging aircraft. Res Nondestr Eval. 2018;29(3):156–66.
https://doi.org/10.1080/09349847.2017.1413833 - Teterko A, Uchanin V, Hutnik V. Improvement of accuracy of eddy current testing of material electric conductivity and dielectric coating of shell. Mater Sci. 2013;49(6):133–9.
https://doi.org/10.1007/s11003-013-9626-0 - Uchanin V. Eddy current techniques for detecting hidden subsurface defects in multilayer aircraft structures. Trans Aerosp Res. 2022;267(2):69–79.
https://doi.org/10.2478/tar-2022-0011 - Uchanin V. Detecting and estimating local corrosion damages in long-service aircraft structures by the eddy current method with double-differential probes. Trans Aerosp Res. 2024;275(2):20–32.
https://doi.org/10.2478/tar-2024-0003 - Lange R, Mook G. Structural analysis of CFRP using eddy current methods. NDT&E Int. 1994;27(5):241–8.
https://doi.org/10.1016/0963-8695(94)90064-7 - De Goeje M, Wapenaar K. Non-destructive inspection of carbon fibre-reinforced plastics using eddy current methods. Composites. 1992;23(3):147–57.
https://doi.org/10.1016/0010-4361(92)90435-W - Cheng J, Qiu J, Xu X, Ji H, Takagi T, Uchimoto T. Research advances in eddy current testing for maintenance of carbon fiber reinforced plastic composites. Int J Appl Electromagn Mech. 2016;51(3):261–84.
https://doi.org/10.3233/JAE-150168 - Heuer H, Schulze MH, Meyendorf N. Non-destructive evaluation (NDE) of composites: Eddy current techniques. In: Karbhari VM, editor. Non-destructive evaluation (NDE) of polymer matrix composites. Cambridge: Woodhead Publishing; 2013. p. 33–55.
https://doi.org/10.1533/9780857093554.1.33 - Tytko G, Rogala T, Katunin A, Yin W. Damage detection in carbon fiber-reinforced composite structures using eddy current pot-core sensor. IEEE Access. 2024;12:123609–20.
https://doi.org/10.1109/ACCESS.2024.3454015 - Xu X, Ji H, Qiu J, Takagi T. Detection of delamination in laminated CFRP composites using eddy current testing: Simulation and experimental study. Int J Appl Electromagn Mech. 2018;57(2):1–16.
https://doi.org/10.3233/JAE-170136 - Uchanin VM, Rybachuk VG. Possibility of eddy current testing of low-conductive heterogeneous media [in Ukrainian]. Inf Extr Process. 2022;50(126):5–12.
https://doi.org/10.15407/vidbir2022.50.005 - Rybachuk VH, Uchanin VM, Kulynych YP. Specific features of testing of anisotropic nonmagnetic materials by eddy-current probes with circular windings. Mater Sci. 2022;57:452–8.
https://doi.org/10.1007/s11003-022-00565-2 - Rybachuk VG, Uchanin VM. A recurrent formula for determination of the effective coercive force in layered ferromagnetic materials. Mater Sci. 2023;58(10):533–539.
https://doi.org/10.1007/s11003-023-00695-1 - Dybiec C, Wlodarczyk S, Dybiec M. Measurement of own stress using the eddy current method. In: Proceedings of the 7th European Conference on Nondestructive Testing; 1998 May 26–29; Copenhagen, Denmark. NDT.net. 1998;3(12). Available from:
https://www.ndt.net/article/ecndt98/et/404/404.htm - Kondej A, Szczepański A. The amplitude-frequency measurement in non-destructive testing using the eddy current method. Weld Technol Rev. 2018;90(11):12–5.
https://doi.org/10.26628/wtr.v90i11.973 - Uchanin V, Aleschenko O, Savin A, Derecha V. Research of the eddy-current resonance method for measuring the thickness of the carbon fiber reinforced plastic layer on metallic structures. Paton Weld J. 2025;7:37–41.
https://doi.org/10.15407/tpwj2025.07.07 - Hagemaier DJ. Eddy current standard depth of penetration. Mater Eval. 1985;43(10):1438–41.
- Mottl Z. The quantitative relations between true and standard depth of penetration for air-cored probe coils in eddy current testing. NDT Int. 1990;23(1):11–18.
https://doi.org/10.1016/0308-9126(90)90105-9
DOI: https://doi.org/10.2478/tar-2025-0014 | Journal eISSN: 2545-2835
Language: English
Page range: 62 - 74
Submitted on: Jul 14, 2025
Accepted on: Sep 23, 2025
Published on: Oct 31, 2025
Published by: Sciendo
In partnership with: Paradigm Publishing Services
Publication frequency: 4 issues per year
Keywords:
Related subjects:
© 2025 Valentyn Uchanin, Oleksiy Aleschenko, Valeriy Derecha, published by Sciendo
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.