References
- The Next Generation and Future of GE | General Electric. Available at: https://www.ge.com/additive/sites/default/files/2020-08/GE9X%20Additive%20parts.pdf
- Kozak, J. and Zakrzewski, T. “Accuracy Problems of Additive Manufacturing using SLS/SLM Processes.” AIP Conference Proceedings, 2018. DOI 10.1063/1.5056273.
- Meier, C., Penny, R.W., Zou, Y., Gibbs, J.S., and Hart, A.J. Thermophysical Phenomena in Metal Additive Manufacturing by Selective Laser Melting: Fundamentals, Modeling, Simulation and Experimentation. Mechanosynthesis Group, Department of Mechanical Engineering, Massachusetts Institute, Cambridge (2017).
- Zakrzewski, T., Kozak, J., Witt, M., and Dębowska-Wąsak, M. “Dimensional Analysis of the Effect of SLM Parameters on Surface Roughness and Material Density.” 20st CIRP Conference on Electro Phisical and Chemical Machining XX, Book Series: Procedia CIRP, Zürich (2021): pp. 115–120.
- Kozak, J., Zakrzewski, T., Witt, M., and Dębowska-Wąsak, M. “Selected Problems of Additive Manufacturing Using SLS/SLM Processes.” Transactions on Aerospace Research Vol. 1 No. 262 (2021): pp. 24–44.
- DebRoy, T., Wei, H.L., and Zuback, J.S. “Additive Manufacturing of Metallic Components – Process, Structure and Properties.” Progress in Materials Science Vol. 92 (2018): 112–224.
- Bayat, M., Dong, W., Thorborg, J., To, A.C., and Hattel, J.H. “A Review of Multi-Scale and Multi-Physics Simulations of Metal Additive Manufacturing Processes with Focus on Modelling Strategies.” Additive Manufacturing Vol. 47 (2021): p. 102278.
- Dezfoli, Amir Reza Ansari, Hwang, Weng-Sing, Huang, Wei-Chin, and Tsai, Tsung-Wen. (2017). “Determination and Controlling of Grain Structure of Metals after Laser Incidence: Theoretical Approach.” Scientific Reports Vol. 7 (2017): article: 41527.
- Kozak, J. Mathematical Modelling of Advanced Manufacturing Processes. Institute of Aviation Scientific Publications Division, Warsaw (2018).
- Zakrzewski, T. “Optimization SLS/SLM Process Conditions to Minimize Product Inaccuracy.” PhD Dissertation. The Warsaw University of Technology. 2022. Available at: https://www.wip.pw.edu.pl/Media/RecenzjeKF/Streszczenie-pracy-mgr.-inz.-Tomasza-Zakrzewskiego
- Kruth, J.-P., Dadbakhsh, S., Vrancken, B., Kempen, K., Vleugels, J., Van Humbeeck, J., Srivatsan, T., & Sudarshan, T. (2016). Additive Manufacturing of Metals via Selective Laser Melting Process Aspects and Material Developments. In Additive Manufacturing: Innovations, Advances and Applications (pp. 69–99). CRC PRESS-TAYLOR & FRANCIS GROUP.
- Zeng, K.; Pal, D.; Stucker, B. A review of thermal analysis methods in laser sintering and selective laser melting. In Proceedings of the Solid Freeform Fabrication Symposium Austin, Austin, TX, USA, 6–8 August 2012; Vol. 60 (2012): 796–814.
- Kyogoku, H. and Ikeshojia, T. “A review of metal additive manufacturing technologies: Mechanism of defects formation and simulation of melting and solidification phenomena in laser powder bed fusion process”, Mechanical Engineering Reviews, 2020, Vol. 7 (1): 19-00182
- Schoinochoritis, B., Chantzis, D., and Salonitis, K. “Simulation of Metallic Powder Bed Additive Manufacturing Processes with the Finite Element Method: A Critical Review.” Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. 2017; 231(1): 96–117.
- Gong, K., Gu, H., Rafi, H., Starr, T., and Stucker, B. “Analysis of Defect Generation in Ti-6Al-4V Parts Made using Powder Bed Fusion Additive Manufacturing Processes.” Additive Manufacturing Vol. 1 (2014): pp. 87–98.
- Engelhardt, A., Kahl, M., Richter, J., Krooß, P., Kroll, A., and Niendorf, T. “Investigation of Processing Windows in Additive Manufacturing of AlSi10Mg for Faster Production Utilizing Data-Driven Modeling.” Additive Manufacturing Vol. 55 (2022): article: 102858.
- Ridolfi, M.R., Folgarait, P., and Di Schino, A. “Laser Operating Windows Prediction in Selective Laser-Melting Processing of Metallic Powders: Development and Validation of a Computational Fluid Dynamics-Based Model.” Materials Vol. 13 (2020): article 1424.
- Ahn, I.H. “Determination of a Process Window with Consideration of Effective Layer Thickness in SLM Process.” The International Journal of Advanced Manufacturing Technology Vol. 105 (2019): pp. 4181–4191.
- COMSOL Multiphysics® version 5.6. COMSOL AB, Stockholm, Sweden. Available at: www.comsol.com
- Simulation of Laser Powder-bed Fusion Additive Manufacturing Process Using the COMSOL Multiphysics® software. COMSOL - Software for Multiphysics Simulation. Available at: https://www.comsol.com/paper/simulation-of-laser-powder-bed-fusion-additive-manufacturing-process-using-the-c-65242
- Zhu, J-N., Borisov, E., Liang, X., Farber, E., Hermans, M.J.M., and Popovich, V.A. “Predictive Analytical Modelling and Experimental Validation of Processing Maps in Additive Manufacturing of Nitinol Alloys.” Additive Manufacturing Vol. 38 (Feb. 2021): article 101802.