Fyall Z. A., Wysocka A., Risk of GRP panel failure during installation in sewers when using relining technology, the second International Conference on Vulnerability and Risk Analysis and Management (ICVRAM) and the sixth International Symposium on Undertainty Modeling and Analysis (ISUMA), July 13–16, 2014, Liverpool, United Kingdom, 2014, pp. 1254–1263,
DWA-A 143–2, Sanierung von Entwässerungsszstemen außerhalb von Gebäuden, Teil 2: Statische Berechnung zur Sanierung von Abwasserleitungen und -kanälen mit Lining- und Montageverfahren, Germany
Alawaji HA, Temperature effects on polyethylene (HDPE) and fiberglass (GRP) pipes, http://www.ksu.edu.sa/sites/Colleges/Engineering/final Report/CE-23-26-27.pdf, available in February 20, 2008,
Rosquoët F., Alexis A., Khelidj A., Phelipot A., Experimental study of cement grout: rheological behavior and sedimentation, Cem. Concr. Res., 33 (2003), pp. 713–722
Minh H., Mutsuyoshi H., Niitani K., Influence of grouting condition on crack and load-carrying capacity of post-tensioned concrete beam due to chloride-induced corrosion, Constr. Build. Mater., 21 (2007), pp. 1568–1575
Naaman A.E., Reinforced concrete in Encyclopedia of materials: Science and technology (second edition), KHJBWCCFIJKM Veyssière, Elsevier, Oxford (2001), pp. 8095–8109
Wang L., Zhang X., Zhang J., Ma Y., Xiang Y., Liu Y., Effect of insufficient grouting and strand corrosion on flexural behavior of pc beams, Constr. Build. Mater., 53 (2014), pp. 213–224
Hoang Q. G., Kaci A., Kadri E., Gallias J., A new methodology for characterizing segregation of cement grouts during rheological tests, Construction and Building Materials Volume 96, 15 October 2015, pp. 119–126
Syachrania S., Jeongb H. S., Raic V., Chaed M. J., Iseleye T., A risk management approach to safety assessment of trenchless technologies for culvert rehabilitation, Tunnelling and Underground Space Technology, Vol. 25, 12/2010, pp. 681–688
Thomas N. K., George S. P., John S. M., George S. P. guided by Asst. Prof. M.S. S. Stress, Analysis of Underground GRP Pipe Subjected to Internal and External Loading Conditions, International Journal of Advanced Mechanical Engineering, Vol. 4, No 4/2014, pp. 435–440
Zhang X., Li Z., Zhu S., Coupled-Field, Analysis of FRP Pipe under Thermal and Internal Pressure Loads, 2010 International Symposium on Computational Intelligence & Design (ISCID); 2010, pp158–161,
Falter B., Buckling Experiments on egg-shaped PE Linings, Mediterranean NO DIG 2007 - XXVth International Conference & Exhibition - Roma, 10/12 Settembre 2007