References
- M. J. Tomlinson, Pile design and construction practice. Taylor and Francis (1994).
- P. Więcławski, Methodology for estimating settlement of Vibro piles based on CPT. Politechnika Gdańsk (2016).
- G. Baldi, R. Bellotti, V.N. Ghionna, M. Jemiolkowski, D.C.F. Lo Presti, Modulus of sands from CPT and DMT. Proc. 12-th International Conference on Soil Mechanics and Foundation Engineering. Rio de Janerio. Balkema Rotterdam, Vol. 1 (1989).
- P. Bandini, R. Salgado, Methods of piles design based on CPT and SPT results. Balkema, Rotterdam (1998).
- C. P. Wroth, The Interpretation of in situ Soil Tests. Geotechnique, Vol. 34, No 4 (1984).
- A. Mandolini, Design of axially loaded piles – Italian practice. Proceeding International Seminar on Design of Axially Loaded Piles, European Practice, Brussels (1997).
- M. Bustamante, L. Gianeselli, Pile Bearing Capacity Prediction by Means of Static Penetration CPT. Proceedings of 2nd European Symposium on Penetration Testing, Amsterdam, Vol. 2 (1982).
- J. DeRuiter, F. L. Beringen, Pile Foundations for Large North Sea Structures. Marine Geotechnology, 3(3) (1979).
- K. Gwizdała, P. Więcławski, Polish experience in the assessment of pile bearing capacity and settlement of the pile foundation. Baltic Piling Days, Estonia, Talin (2012).
- G. G. Meyerhof, Bearing Capacity and Settlement of Pile Foundations. Journal of Geotechnical Engineering, ASCE, 102(3) (1976).
- R. Salgado, J. Lee, Pile Design on Cone Penetration Test Results. Final Report, FHWA/IN/JTRP-99/8 (1999).
- K. Gwizdała, Polish design methods for single axially loaded piles. Proceedings ERTC3 Seminar Design of Axially Loaded Piles. European Practice, 291–306, Brussels, Balkema (1997).
- A. Krasiński, Proposal for calculating the bearing capacity of screw displacement piles in non-cohesive soils based on CPT results. Studia Geotechnica et Mechanica, Vol. XXXIV, No. 4 (2012).
- K. Gwizdała, T. Brzozowski, P. Więcławski, Calculation aspects used in Eurocode 7 for pile foundation. From Research to Design in European Practice. Bratislava (2010).
- K. Gwizdała, M. Stęczniewski, Determination of the bearing capacity of pile foundations based on CPT test results. Studia Geotechnica et Mechanica No. 1-2/2007, Wrocław (2007).
- CEN (European Committee for Standardization), “Geotechnical design, part 1. General rules. Eurocode 7, Brussels (1997).
- E.M. Smed, P, Cundall. Elasto-plasto Strain Hardeninh Mohr-Coulomb Model-Derivation and Implementation, Aalborg, Denmark (2012).
- M. Strafield, P. Cundall, Towards a methodology for rock mechanics modelling International Journal of Rock Mechanics and Mining Science (1988).
- Wang Fan, M. Keer Leon, Numerical Simulation for Three Dimensional Elastic-Plastic Contact with Hardening BehaviorJ. Tribol 127(3) (2005).
- CEN (European Committee for Standardization), “Geotechnical design, part 2. Ground investigation and testing. Eurocode 7, Brussels (1997).
- F. K. Chin, Estimation of the ultimate load of piles from tests not carried to failure. Proceedings of the Second Southeast Asian Conference on Soil Engineering (1970).
- P. Więcławski, Evaluation of the interaction of Vibro piles with the soil on the basis of in-situ tests. Selected issues in construction and building materials and geotechnics. Bydgoszcz (2015).
- K. Gwizdała, P. Więcławski, Ultimate bearing capacity and interpretations of direct methods for displacement piles. Selected issues in construction and building materials and geotechnics. Bydgoszcz (2015).
- P. Więcławski, Limit load capacity of axially loaded Vibro piles based on a static load test and results of CPT tests. Scientific and technical conference for young scientists. on the occasion of the 100th anniversary of the Faculty of Civil Engineering of the Warsaw University of Technology, Warsaw (2015).
- M. Tarnawski, M. Ura, The comparison of CPT and DPSH tests results in non-cohesive soils. Marine Engineering and Geotechnics, No. 1/2012, Gdańsk (2012).