References
- Alabadan, B. A., Adekola, K. A., & Esumobi, T. J. (2016). Compressive strength of rice husk stabilized termite hill soil. Agricultural Engineering International: CIGR Journal.
- Alake and Akaninyene,(2014) “Influence of curing media on the compressive strength of termite mound-lime blended cement mortar g media on the compressive strength of termite mound-lime blended cement mortar,” https://doi.org/10.11113/mjce.v26.15896
- Assam, S., Okafor, F., & Umoh, U. (2016). Potentials of Processed Termite as a Stabilizing Agent in Clay Soil. IOSR Journal of Mechanical and Civil Engineering. https://doi.org/10.9790/1684-1304014050
- ASTM-C216-16. (2013). Standard Specification for Hollow Brick (Hollow Masonry Units Made From Clay or. American Society for Testing Material. https://doi.org/10.1520/C0652-12A.
- ASTM C 618. (2010). Standard Specification for Coal Fly Ash and Raw or Calcined Natural Pozzolan for Use. Annual Book of ASTM Standards.
- ASTM C62/C62M-12. (2012). Standard Specification for Building Brick (Solid Masonry Units Made From Clay or Shale). ASTM International. https://doi.org/10.1520/C0062-10
- ASTM C67-19. (2019). Standard Test Methods for Sampling and Testing Brick and Structural Clay Tile. ASTM International. https://doi.org/10.1520/C0067
- ASTM D 854. (2002). ASTM D854 Standard Test Methods for Specific Gravity of Soil Solids by Water Pycnometer. ASTM International.
- Attah, L. E. (2008). The Composition and Physical Properties of Some Clays of Cross River State, Nigeria. African Research Review. https://doi.org/10.4314/afrrev.v2i1.41026
- Brick: a world history. (2004). Choice Reviews Online. https://doi.org/10.5860/choice.41-3863
- Brick Development Association, T. (2006). BDA Guide to Successful Brickwork. In BDA Guide to Successful Brickwork (Third Edit). https://doi.org/10.4324/9780080456287
- BS 3921(1985) Specification for clay bricks. British Standards Institution https://infostore.saiglobal.com/en-us/Standards/BS-3921-1985-1985-196932_SAIG_BSI_BSI_469615/
- Chin, I. R., & Behie, B. (2010). Efflorescence: Evaluation of published test methods for brick and efforts to develop a Masonry assembly test method. Journal of ASTM International. https://doi.org/10.1520/JAI102744
- Dalkılıç, N., & Nabikoğlu, A. (2017). Traditional manufacturing of clay brick used in the historical buildings of Diyarbakir (Turkey). Frontiers of Architectural Research. https://doi.org/10.1016/j.foar.2017.06.003
- Das, B., & Sawicki, A. (2001). Fundamentals of Geotechnical Engineering. In Applied Mechanics Reviews (Third). Chris Carson. https://doi.org/10.1115/1.1421116
- Dos Reis, G. S., Cazacliu, B. G., Cothenet, A., Poullain, P., Wilhelm, M., Sampaio, C. H., Lima, E. C., Ambros, W., & Torrenti, J. M. (2020). Fabrication, microstructure, and properties of fired clay bricks using construction and demolition waste sludge as the main additive. Journal of Cleaner Production. https://doi.org/10.1016/j.jclepro.2020.120733
- Dr.k. Arora, Soil mechanics and foundation engineering,. 7th Edition print 2019 Edition Delhi. 2019
- Drive, C. P. (2007). Specifications for and Classification of Brick. Technical Notes on Brick Construction.
- Efrem Wakjira Hode. (2015). Study of Compressed Earth Blocks as an Alternative Wall Building Material. International Journal of Engineering Research and Technology (IJERT).
- Ethiopian Standards Agency. (2015). Catalogue 2015 Catalogue 2015. Ethiopian Standards Agency. http://www.ethiostandards.org/other files/2015 catalogue.pdf
- Eze, P. N., Kokwe, A., & Eze, J. U. (2020). Advances in Nanoscale Study of Organomineral Complexes of Termite Mounds and Associated Soils: A Systematic Review. In Applied and Environmental Soil Science. https://doi.org/10.1155/2020/8087273
- Fufa, F. (2016). Experimental Evaluation of Activated Termite Mound for Fluoride Adsorption. IOSR Journal of Environmental Science, Toxicology and Food Technology. https://doi.org/10.9790/2402-100802119132
- Getachew, K., & Mosisa, A. (2017). Laboratory Investigation of Locally Produced Clay Brick Quality and Suitability for Load Bearing Element in Jimma Area, Ethiopia Alemu Mosisa. International Journal of Engineering Research & Technology.
- Glaydson Simõesdos Reisab Bogdan Grigore Cazacliub Alexis Cothenetb Philippe Poullainc Michaela Wilhelmd Carlos Hoffmann Sampaioae Eder Claudio Limaah Weslei Ambrosf Jean and Michel Torrentig “Fabrication, microstructure, and properties of fired clay bricks using construction and demolition waste sludge as the main additive,” J. Clean. Prod., 2020, doi: 10.1016/j.jclepro.2020.120733.
- Hartmann, K., Krishnan, R., Merz, R., Neplotnik, G., Prinz, F. B., Schultz, L., Terk, M., & Weiss, L. E. (2018). Robot-assisted shape deposition manufacturing. In Proceedings - IEEE International Conference on Robotics and Automation (Vol. 1). https://doi.org/10.1109/robot.1994.350900
- Impact Analysis Of Informal Brick Production On The Environment: Gaborone Dam Area, Botswana. (2013). International Journal of Scientific & Technology Research.
- James W. P. Campbell and William Pryce, “Brick: a world history,” Choice Rev. Online, 2004, doi: 10.5860/choice.41-3863.
- Johari, I., Said, S., Hisham, B., Bakar, A., & Ahmad, Z. A. (2010). Effect of the change of firing temperature on microstructure and physical properties of clay bricks from beruas (Malaysia). Science of Sintering. https://doi.org/10.2298/SOS1002245J
- Karaman, S., Ersahin, S., & Gunal, H. (2006). Firing temperature and firing time influence on mechanical and physical properties of clay bricks. Journal of Scientific and Industrial Research.
- Matysek, P., Stryszewska, T., Kańka, S., & Witkowski, M. (2016). The influence of water saturation on mechanical properties of ceramic bricks – tests on 19th-century and contemporary bricks. Materiales de Construcción. https://doi.org/10.3989/mc.2016.07315
- Millogo, Y., Hajjaji, M., & Morel, J. C. (2011). Physical properties, microstructure and mineralogy of termite mound material considered as construction materials. Applied Clay Science. https://doi.org/10.1016/j.clay.2011.02.016
- Miyagawa, S., Koyama, Y., Kokubo, M., Matsushita, Y., Adachi, Y., Sivilay, S., Kawakubo, N., & Oba, S. (2011). Indigenous utilization of termite mounds and their sustainability in a rice growing village of the central plain of Laos. Journal of Ethnobiology and Ethnomedicine. https://doi.org/10.1186/1746-4269-7-24
- Okunade, E. A. (2008). Engineering properties of locally manufactured burnt brick pavers for agrarian and rural Earth roads. American Journal of Applied Sciences. https://doi.org/10.3844/ajassp.2008.1348.1351
- Omobowale, M. O., Armstrong, P. R., Mijinyawa, Y., Igbeka, J. C., & Maghirang, E. B. (2016). Maize storage in termite mound clay, concrete, and steel silos in the humid tropics: Comparison and effect on bacterial and fungal counts. Transactions of the ASABE. https://doi.org/10.13031/trans.59.11437
- Toure, P. M., Sambou, V., Faye, M., & Thiam, A. (2017). Mechanical and thermal characterization of stabilized earth bricks. Energy Procedia. https://doi.org/10.1016/j.egypro.2017.11.271
- Eshetu Tsega, Alemu M. Legese and Fekadu F. Feyissa (2017). Effects of Firing Time and Temperature on Physical Properties of Fired Clay Bricks. American Journal of Civil Engineering. https://doi.org/10.11648/j.ajce.20170501.14
- United Nations. (2019). The sustainable development goals report 2019. In United Nations publication issued by the Department of Economic and Social Affairs.
- Woetzel, J., Ram, S., Mischke, J., Garemo, N., & Sankhe, S. (2014). A blueprint for addressing the global affordable housing challenge. In McKinsey Global Institute.