References
- Abd-Elhady A.A., Meroufel A., El-Din M Sallam H., Atta M., 2020. Experimental and numerical determination of critical osmotic blister size affecting the strength of aged FRP seawater pipe, Polymers and Polymer Composites, First Published, May 8.
- Elhady A., El-Din H., Sallam M., Malik R.A., 2020. Investigation of fatigue crack propagation in steel pipeline repaired by glass fiber reinforced polymer, Composite Structures, Vol. 242, 112189.
- Abd-Elhady A.A., Mubaraki M.A., M Sallam H.E., 2018. Progressive failure prediction of pinned joint in quasi-isotropic laminates used in pipelines, Lat. Am. Journal of Solid and Structures Vol. 15(6).
- Madryas C., Przybyła B., Wysocki L., 2010. Research and Evaluate the Technical Condition of Sewer Pipes. Dolnoslaskie Educational Publisher, Wroclaw.
- DWA-A 143-2: Sanierung von Entwässerungssystemen außerhalb von Gebäuden Teil 2: Statische Berechnung zur Sanierung von Abwasserleitungen und -kanälen mit Lining - und Montageverfahren, Lipiec 2015
- Matthews J. C., Selvakumar A., Condit W., 2012. Demonstration and evaluation of an innovative water main rehabilitation technology: Cured-in-Place Pipe (CIPP) lining, Water Practice & Technology Vol 7 No 2, IWA Publishing.
- Allouche E., Alam S., Sterling R., Condit W., Selvakumar A., 2011. Forensic investigation of a generation old cipp liners, North American Society for Trenchless Technology (NASTT), Paper D-5-04, No-Dig Show 2011, Washington
- Kuliczkowski A., 2010. Trenchless technologies in environmental engineering, Wydawnictwo Seidel-Przywecki Sp. z o.o.
- Kolonko A., Kujawski W., Przybyła B., Roszkowski A., Rybarski S., 2011. Basics of trenchless technical rehabilitation of water and sewage pipelines in urban areas, Izba Gospodarcza „Wodociągi Polskie”, Bydgoszcz.
- Madryas C., Kolonko A., 2010. Comments on CIPP liners, Inżynieria Bezwykopowa September - October 5, 2010 [35], Krakow.
- PN-EN ISO 11295:2018-02 - Classification and information on design and applications of plastics piping systems used for renovation and replacement
- PN-EN ISO 11296-1:2018-04 - Plastic piping systems for the renovation of underground non-pressure drainage and sewerage networks - Part 1: General provisions
- PN-EN ISO 11296-4:2018-03 - Plastic piping systems for the renovation of underground non-pressure drainage and sewerage networks — Part 4: Lining with cured-in-place pipes
- PN-EN ISO 11297-1:2018-05 - Plastic piping systems for the renovation of underground drainage and sewerage networks under pressure — Part 1: General provisions
- PN-EN ISO 11297-4:2018-03 - Plastic piping systems for the renovation of underground drainage and sewerage networks under pressure — Part 4: Lining with cured-in-place pipes
- Kolonko A., 2003. Polish experience in the renovation of sewer pipes using CIPP sleeves, Inżynieria Bezwykopowa - August, Krakow.
- PN-EN ISO 14125:2001 - Fibre-reinforced plastic composites — Determination of flexural properties
- PN-EN ISO 178:2019-06 - Plastics — Determination of flexural properties
- CIPP Liner Test Standard, IKT – Institute for Underground Infrastructure, Gelsenkirchen, 2009
- Allouche E. N., Bainbridge K., Moore I.D., 2005. Laboratory examination of a cured in place pressure pipe liner for a potable water distribution system, North American Society for Trenchless Technology (NASTT) NO-DIG 2005, Orlando.
- ASTM D790-17 Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials
- ASTM D638 – 14 Standard Test Method for Tensile Properties of Plastics
- Allouche E., Alam S., Simicevic J., Sterling R., Condit W., Matthews J., Selvakumar A., 2014. A pilot study for retrospective evaluation of cured-in-place pipe (CIPP) rehabilitation of municipal gravity sewers, Tunnelling and Underground Space Technology 39, 82–93.
- Abel T., 2015. Laboratory tests of pipelines reinforced with close-fit Trolining liner, Archives of Civil and Mechanical Engineering 15, 427–435.
- Kuliczkowski A., Mogielski K. Results of laboratory tests of concrete, vitrified clay and pvc sewer pipes with CIPP liners, Environment 23–34.
- Ra K., Teimouri Sendesi S.M., Nuruddin Md., Zyakyina N.N., Conkling E.N., Boor B.E., Jafvert Ch.T., Howarter J.A., Youngblood J.P., Whelton A.J., 2019. Considerations for emission monitoring and liner analysis of thermally manufactured sewer cured-in-place-pipes (CIPP), Journal of Hazardous Materials, 371, 540–549.
- Abel T., 2016. Changes in strength parameters of pipelines rehabilitated with close-fit Trolining liners – Numerical analysis based on laboratory tests, Archives of Civil and Mechanical Engineering 16, 30 – 40.
- Calibration Certificate, 2012. Universal Testing Machine model WDW-100, China.
- PN-EN ISO 3126:2006 Plastic piping systems - Plastic components - Checking dimensions
- GWT manual, 2000. Germann Instruments, Denmark.
- Glock, D., 1977. Überkritisches Verhalten eines starr ummantelten Kreisrohres bei Wasserdruck von außen und Temperaturerhöhung, Der Stahlbau 46.