References
- Tulek, M. (2007). A study of the use of chemical waste gypsums in soil stabilization. Balıkesir Üniversitesi Fen Bilimleri Enstitüsü (Doctoral dissertation, Yüksek lisans Tezi).[in Turkish].
- Coruh E., Hinisoglu, S., Kocakerim, M., Arasan, S., Oltulu, M. (2013). Investigation of the usage of borogypsum in the subbase course as a stabilization material. EÜFBED – The Graduate School of Natural and Applied Sciences Journal, 6(2), 221–231.
- Kütük-Sert, T., & Kütük, S. (2013). Physical and marshall properties of borogypsum used as filler aggregate in asphalt concrete. Journal of Materials in Civil Engineering, 25(2), 266–273.
- Gregory, C. A., Saylak, D., & Ledbetter, W. B. (1984). The use of by-product phosphogypsum for road bases and subbases. Transportation Research Record, 998, 47–52.
- Degirmenci, N., Okucu, A., & Turabi, A. (2007). Application of phosphogypsum in soil stabilization. Building and environment, 42(9), 3393–3398.
- Shen, W., Zhou, M., & Zhao, Q. (2007). Study on lime–fly ash–phosphogypsum binder. Construction and Building Materials, 21(7), 1480–1485.
- Yilmaz, I., & Civelekoglu, B. (2009). Gypsum: an additive for stabilization of swelling clay soils. Applied clay science, 44(1–2), 166–172.
- Shen, W., Zhou, M., Ma, W., Hu, J., & Cai, Z. (2009). Investigation on the application of steel slag–fly ash–phosphogypsum solidified material as road base material. Journal of hazardous materials, 164(1), 99–104.
- Kalkan, E., & Akbulut, S. (2004). The positive effects of silica fume on the permeability, swelling pressure and compressive strength of natural clay liners. Engineering Geology, 73(1–2), 145–156.
- Kalantari, B., Prasad, A., & Huat, B. B. (2011). Stabilising peat soil with cement and silica fume. Proceedings of the Institution of Civil Engineers-Geotechnical Engineering, 164(1), 33–39.
- Sattar, M. A. A., Daud, K. A., & Al-Azzawi, A. A. (2012). Effect of silica fume addition on the behavior of siltyclayey soils. Journal of Engineering and Sustainable Development, 16(1), 92–105.
- Negi, C., Yadav, R.K. and Singhai, A.K.,a (2013). Effect of silica fume on engineering properties of black cotton soil. Inter. J. of Computational Eng. Research, 3(7), 1.
- Negi, C., Yadav, R.K., and Singhai, A.K.,b (2013). Effect of silica fume on index properties of black cotton soil. Inter. J. of Scientific & Eng. Research, 4(8).
- Gupta, C., & Sharma, R. K. (2014). Influence of micro silica fume on sub grade characteristics of expansive soil. International Journal of Civil Engineering Research, 5(1), 77–82.
- Cokca, E. (1999). Effect of fly ash on swell pressure of an expansive soil. Electronic Journal of Geotechnical Engineering, 4, 14.
- Consoli, N. C., Prietto, P. D. M., Carraro, J. A. H., & Heineck, K. S. (2001). Behavior of compacted soil-fly ash-carbide lime mixtures. Journal of Geotechnical and Geoenvironmental Engineering, 127(9), 774–782.
- Phani Kumar, B. R., & Sharma, R. S. (2004). Effect of fly ash on engineering properties of expansive soils. Journal of Geotechnical and Geoenvironmental Engineering, 130(7), 764–767.
- Nalbantoğlu, Z. (2004). Effectiveness of class C fly ash as an expansive soil stabilizer. Construction and Building Materials, 18(6), 377–381.
- Prabakar, J., Dendorkar, N., & Morchhale, R. K. (2004). Influence of fly ash on strength behavior of typical soils. Construction and Building Materials, 18(4), 263–267.
- Kolias, S., Kasselouri-Rigopoulou, V., & Karahalios, A. (2005). Stabilisation of clayey soils with high calcium fly ash and cement. Cement and Concrete Composites, 27(2), 301–313.
- Edil, T. B., Acosta, H. A., & Benson, C. H. (2006). Stabilizing soft fine-grained soils with fly ash. Journal of materials in civil engineering, 18(2), 283–294.
- Chauhan, M. S., Mittal, S., & Mohanty, B. (2008). Performance evaluation of silty sand subgrade reinforced with fly ash and fibre. Geotextiles and geomembranes, 26(5), 429–435.
- Brooks, R. M. (2009). Soil stabilization with fly ash and rice husk ash. International Journal of Research and Reviews in Applied Sciences, 1(3), 209–217.
- Cristelo, N., Glendinning, S., Miranda, T., Oliveira, D., & Silva, R. (2012). Soil stabilisation using alkaline activation of fly ash for self compacting rammed earth construction. Construction and building materials, 36, 727–735.
- Akbulut, S., Arasan, S., & Kalkan, E. (2007). Modification of clayey soils using scrap tire rubber and synthetic fibers. Applied Clay Science, 38(1–2), 23–32.
- Kalkan, E. (2013). Preparation of scrap tire rubber fiber–silica fume mixtures for modification of clayey soils. Applied Clay Science, 80, 117–125.
- Fragaszy, R. J., & Lawton, E. (1984). Bearing capacity of reinforced sand subgrades. Journal of Geotechnical Engineering, 110(10), 1500–1507.
- Huang, C. C., & Tatsuoka, F. (1990). Bearing capacity of reinforced horizontal sandy ground. Geotextiles and Geomembranes, 9(1), 51–82.
- Akinmusuru, J. O., & Akinbolade, J. A. (1981). Stability of loaded footings on reinforced soil. Journal of Geotechnical and Geoenvironmental Engineering, 107(ASCE 16320 Proceeding).
- Yetimoglu, T., Inanir, M., & Inanir, O. E. (2005). A study on bearing capacity of randomly distributed fiber-reinforced sand fills overlying soft clay. Geotextiles and Geomembranes, 23(2), 174–183.
- Guido, V.A., Chang, D.K., Sweeny, M.A. (1986). Comparison of geogrid and geotextile reinforced slabs. Canadian Geotech. J. 20, 435–440.
- Ghosh, A., Ghosh, A., & Bera, A. K. (2005). Bearing capacity of square footing on pond ash reinforced with jutegeotextile. Geotextiles and Geomembranes, 23(2), 144–173.
- Omar, M.T., Das, B.M., Yen, S.C., Puri, V.K., Cook, E.E., a (1993). Ultimate bearing capacity of rectangular foundations on geogrid reinforced sand. Geotechnical Testing J, ASTM 16 (2), 246–252.
- Omar, M.T., Das, B.M., Puri, V.K., Yen, S.C., b, (1993). Ultimate bearing capacity of shallow foundations on sand with geogrid reinforcement. Canadian Geotech. J. 30, 545–549.
- Yetimoglu, T., Wu, J. T., & Saglamer, A. (1994). Bearing capacity of rectangular footings on geogrid-reinforced sand. Journal of Geotechnical Engineering, 120(12), 2083–2099.
- Adams, M. T., & Collin, J. G. (1997). Large model spread footing load tests on geosynthetic reinforced soil foundations. Journal of Geotechnical and Geoenvironmental Engineering, 123(1), 66–72.
- Patra, C. R., Das, B. M., Bhoi, M., & Shin, E. C. (2006). Eccentrically loaded strip foundation on geogrid-reinforced sand. Geotextiles and Geomembranes, 24(4), 254–259.
- Davis, E. A., & Hudson, E. C. (2000). Development of new colors and style for recycled polypropylene toothbrushes. UMass Lowell, Chelsea Center for Recycling and Economic Development.
- ASTM, D. (2011). 2487 (2006) Standard practice for classification of soils for engineering purposes (Unified Soil Classification System). Book of Standards, 4(08).
- ASTM, D. (2000). 698-00, Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Standard Effort (12,400 ft-lbf/ft3 (600 kN-m/m3)), ASTM International. Annual Book of ASTM Standards, 4.
- ASTM, D. 4318-00. 2000. Standard test method for liquid limit, plastic limit and plasticity index of soils. Annual Book of ASTM Standards, 4, 08.
- British Standard, B. S. 1377 part 2. 1990. Methods of Test for Soils for Civil Engineering Purposes General Requirements and Sample Preparation.
- ASTM, D. 2166 (2006). Standard test method for unconfined compressive strength of cohesive soil. ASTM standard D, 2166.
- Kværnø, S. H., & Øygarden, L. (2006). The influence of freeze–thaw cycles and soil moisture on aggregate stability of three soils in Norway. Catena, 67(3), 175–182.
- Qi, J., Ma, W., & Song, C. (2008). Influence of freeze–thaw on engineering properties of a silty soil. Cold regions science and technology, 53(3), 397–404.
- Gullu, H., & Hazirbaba, K. (2010). Unconfined compressive strength and post-freeze–thaw behavior of fine-grained soils treated with geofiber and synthetic fluid. Cold regions science and technology, 62(2–3), 142–150.
- Ghazavi, M., & Roustaie, M. (2010). The influence of freeze–thaw cycles on the unconfined compressive strength of fiber-reinforced clay. Cold regions science and technology, 61(2–3), 125–131.
- Liu, J., Wang, T., & Tian, Y. (2010). Experimental study of the dynamic properties of cement-and lime-modified clay soils subjected to freeze–thaw cycles. Cold Regions Science and Technology, 61(1), 29–33.
- Hazirbaba, K., Zhang, Y., & Hulsey, J. L. (2011). Evaluation of temperature and freeze–thaw effects on excess pore pressure generation of fine-grained soils. Soil dynamics and earthquake engineering, 31(3), 372–384.
- Zaimoğlu, A. Ş., Hattatoğlu, F., Akbulut, R. K., & Yetimoğlu, T. (2012). Freeze-thaw behavior of fine grained soils subjected to surcharge loads. In 3rd International Conference on New Developments in Soil Mechanics and Geotechnical Engineering, 28–30.
- Yarbaşı, N., Kalkan, E., & Akbulut, S. (2007). Modification of the geotechnical properties, as influenced by freeze–thaw, of granular soils with waste additives. Cold regions science and technology, 48(1), 44–54.
- Kamei, T., Ahmed, A., & Shibi, T. (2012). Effect of freeze–thaw cycles on durability and strength of very soft clay soil stabilised with recycled Bassanite. Cold Regions Science and Technology, 82, 124–129.
- Czurda, K. A., & Hohmann, M. (1997). Freezing effect on shear strength of clayey soils. Applied clay science, 12(1–2), 165–187.
- Viklander, P., & Eigenbrod, D. (2000). Stone movements and permeability changes in till caused by freezing and thawing. Cold Regions Science and Technology, 31(2), 151–162.
- Ahmed, A., & Ugai, K. (2011). Environmental effects on durability of soil stabilized with recycled gypsum. Cold regions science and technology, 66(2–3), 84–92.
- Kamei, T., Ahmed, A., & Ugai, K. (2011). The performance of soft clay soil stabilized with recycled gypsum in wet environment. In Proceedings of the 14th Pan-American Conference on Soil Mechanics and Geotechnical Engineering.
- Yetimoglu, T., & Salbas, O. (2003). A study on shear strength of sands reinforced with randomly distributed discrete fibers. Geotextiles and Geomembranes, 21(2), 103–110.
- Freilich, B. J., Li, C., & Zornberg, J. G. (2010). Effective shear strength of fiber-reinforced clays. In 9th International Conference on Geosynthetics, Brazil, 1997–2000.
- Zaimoglu, A. S. (2010). Freezing–thawing behavior of fine-grained soils reinforced with polypropylene fibers. Cold regions science and technology, 60(1), 63–65.
- Tunç A. (2002). Geotechnic and Its Applications on Road Engineering. Atlas Publisher, İstanbul, Turkey [in Turkish].