References
- Dubiński, J., Turek, M. (2012). Szanse i zagrożenia rozwoju górnictwa węgla kamiennego w Polsce [Chances and threats to the development of hard coal mining in Poland]. Wiadomości Górnicze 63(11), 626-633 (in Polish).
- Lubosik, Z., Prusek, S., Wrana, A., Walentek, A. (2015). Underground measurement of gateroad stability at the depth around 1000 m. In: 34th International Conference on Ground Control in Mining 1–9.
- Duży, S. (2007). Wpływ głębokości lokalizacji wyrobisk górniczych na niezawodność i bezpieczeństwo ich konstrukcji. Warsztaty 2007 z cyklu: Zagrożenia naturalne w górnictwie, 183-196 (in Polish).
- Majcherczyk, T., Małkowski, P., Niedbalski, Z., Bednarek, Ł. (2014). Analysis of yielding steel arch support with rock bolts in mine roadways stability aspect. Archives of Mining Sciences 59(3), 641-654.
- Walentek, A., Lubosik, Z. (2017). Optymalizacja obudowy wyrobisk przyścianowych zlokalizowanych na głębokości większej niż 1000 m Przegląd Górniczy 73(2), 76-84 (in Polish).
- Hoek, E., Kaiser, P., Bawden, W. (1995). Support of Underground Excavation in Hard Rock. Funding by Mining Research Directorate and Universities Research Incentive Fund, Rotterdam
- Majcherczyk, T., Małkowski, P., Niedbalski, Z. (2008). Badania nowych rozwiązań technologicznych w celu rozrzedzenia obudowy podporowej w wyrobiskach korytarzowych [Testing new technological solutions for increasing the clear interval between arches in roadways]. Kraków. Uczelniane Wydawnictwa Naukowo – Dydaktyczne (in Polish).
- Brodny, J. (2010). Determining the working characteristic of a friction joint in a yielding support Archives of Mining Sciences 55(4), 733-746.
- Brown, E., Hoek, H. (1978). Trends in relationships between measured rock in situ stress and depth. International Journal of Rock Mechanics and Mining Sciences 15(4), 211-215.
- Liu, C. (2011). Distribution laws of in-situ stress in deep underground coal mines. Procedia Engineering 26(1), 909-917.
- Malan, D., Basson, F. (1998). Ultra-deep mining: The increased potentional for squeezing conditions The Journal of the South African Institute of Mining and Metallurgy 98(7), 353-363.
- Rotkegel, M. (2013). ŁPw steel arch support – Designing and test results. Journal of Sustainable Mining 12(1) 34-40.
- Zhang, W., Zhang, D., Xu, M. (2013). Fast drivage technology for large sections of deep coal-rock roadway in complicated geological conditions. Electronic Journal of Geotechnical Engineering 13, 1939-1950.
- Brodny, J. (2011). Tests of friction joints in mining yielding supports under dynamic load Archives of Mining Sciences 56(2), 303-318.
- Jiang, B., Wang, L., Lu, Y., Gu, S., Sun, X. (2015). Failure mechanism analysis and support design for deep composite soft rock roadway: A case study of the Yangcheng coal mine in China. Shock and Vibration 1, 1-14.
- Zhai, X., Huang, G., Chen, Ch., Li, R. (2018). Combined supporting technology with bolt-grouting and floor pressure-relief for deep chamber: An underground coal mine case study. Energies 11(1), 1-16.
- Cao, R., Cao, P., Lin, H. (2016). Support technology of deep roadway under high stress and its application. International Journal of Mining Science and Technology 26(5), 787-793.
- Yu, Z., Kulatilake, P., Jiang, F. (2012). Effect of tunnel shape and support system on stability of a tunnel in a deep coal mine in China. Geotechnical and Geological Engineering 30(2), 383-394.
- Bednarek, Ł. (2017). Wpływ dużej głębokości wyrobisk udostępniających w kopalni węgla kamiennego na zachowanie się górotworu i deformacje obudowy [Influence of the great depth of opening-out excavation headings in coal mines on the behavior of rock mass and ground support deformation]. Ph.D. Thesis. AGH University of Science and Technology, Kraków. [unpublished] (in Polish).