Development of Project Recommendations to Prevent Autooscillations and Vibration Overload of the Rotary Machine Working Member
References
- Hebda, M., Chichinadze, A. “Lubricants”, Lubrication Technique, Sleeve and Rolling Bearings, vol. 2. Moscow: Mashinostroenie, 1990.
- Khadersab, A., Shivakumar, S.”Vibration Analysis Techniques for Rotating Machinery and its effect on Bearing Faults”, Procedia Manuf 20, pp. 247 – 252, 2018. DOI: 10.1016/j.promfg.2018.02.036
- Lee, C.W. “Vibration analysis of rotors”, Dordrecht: Kluwer Acad. Publ., 1993.
- Brandão, A., de Paula, A. S., Savi, M. A., Thouverez, F. “Nonlinear Dynamics and Chaos of a Nonsmooth Rotor-Stator System”, Math. Problems Eng. 2017, pp. 1 – 10, 2017, DOI: 10.1155/2017/8478951
- Vance, J. M., Murphy, B. G., Zeidan, F. Y. “Machinery Vibration and Rotordynamics”, Wiley Sons, Inc., John, 2010.
- Rusov, V.A. “Spectral Vibration-Based Diagnostics”, Moscow: Mashinostroenie, 1996.
- Kiyanovsky, M., Bondar, O. “The influence of deviation of the main axis of unit inertia on the resource of rolling bearings of stationary mining machines”, J. Kryvyi Rih Nat. Univ. 40, pp. 18 – 22, 2015.
- Orlov, P. I. “Principle of Design”, Moscow: Mashinostroenie, 1977.
- Ullah, N., Xi, C., Cong, T., Yucheng, H. “Rotordynamics analysis of a single helical gear transmission system for high speed applications”, J. Mech. Eng. Sci. 14 (3), pp. 7040 – 7048, 2020. DOI: 10.15282/jmes.14.3.2020.06.0551
- Cruz, W., Arzola, N., Araque, O. “Modeling and experimental validation of the vibration in an unbalance multi-stage rotor”, J. Mech. Eng. Sci. 13 (3), pp. 5703 – 5716, 2019. DOI: 10.15282/jmes.13.3.2019.30.0456
- Frolov, M. I., “Engineering Mechanics”, Parts of the Mechanisms. Moscow: Mashinostroenie, 1990.
- Kiyanovsky, N., Bondar, E. “The increasing of fixed mining machines resource rates by diagnostic maintenance improving”, Metall. Min. Ind. 3, pp. 292–2 97, 2015.
- M. Kiyanovsky, and O. Bondar, “Design maintenance of the stability of balanced position of rotor machines shafts in rolling bearings”, J. Kryvyi Rih Nat. Univ., vol. 47, pp. 112–116, 2018.
- Komanduri, R., Hou, Z. B. “Analysis of heat partition and temperature distribution in sliding systems”, Wear 251 (1-12), pp. 925 – 938, 2001. DOI: 10.1016/s0043-1648(01)00707-4
- Komanduri, R., Hou, Z. B., “Thermal analysis of dry sleeve bearings – a comparison between analytical, numerical (finite element) and experimental results”, Tribol. Int. 34 (3), pp. 145 – 160, 2001. DOI: 10.1016/s0301-679x(00)00144-4
- Rao, S. S. “Mechanical Vibrations”, 5th ed. Pearson, 2011.
- Rachid, B., Hafaifa, A., Boumehraz, M. “Vibrations detection in industrial pumps based on spectral analysis to increase their efficiency”, Manage. Syst. Prod. Eng. 21 (1), pp. 55 – 61, 2016. DOI: 10.2478/mspe-09-01-2016
- Szalai, P., Hajdu, F., Horváth, P., Papp, C., Apagyi, A., Brinissat M., Kuti R. “Determination of Measurement Parameters for Vibration Analysis by Bus”, Strojnícky časopis – Journal of Mechanical Engineering 72 (2), pp. 189 – 200, 2022. DOI: 10.2478/scjme-2022-0028
- Magdolen, L., Danko, J., Milesich, T., Nemec, T., Sloboda, K., Bucha, J. “Dual Mass Flywheel Parameter Identification”, Strojnícky časopis – Journal of Mechanical Engineering 71 (2), pp. 167 – 178, 2021. DOI: 10.2478/scjme-2021-0027
Language: English
Page range: 167 - 174
Published on: May 5, 2026
Published by: Slovak University of Technology in Bratislava
In partnership with: Paradigm Publishing Services
Publication frequency: 2 issues per year
Keywords:
Related subjects:
© 2026 Mykola Kiyanovskyi, Juraj Ondruška, Roman Protasov, Olena Bondar, Anton Ryazantsev, Svitlana Kostiuk, Borys Vorontsov, published by Slovak University of Technology in Bratislava
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.