Experimental Investigation and Optimization of Fiber Laser Cutting Parameters for Stainless Steel AISI 304
References
- Kotadiya, D. J., Kapopara, J. M., Patel, A.R., Dalwadi, Ch. G., Pandya, D.H. “Parametric analysis of process parameters for laser cutting process on SS-304”, Materials Today: Proceedings 5 (2), pp. 5384 – 5390, 2018. DOI: 10.1016/j.matpr.2017.12.124
- Stournaras, A., Stavropoulos, P., Salonitis, K., Chryssolouris, G. “An investigation of quality in CO₂ laser cutting of aluminum”, CIRP Journal of Manufacturing Science and Technology 2 (1), pp. 61 – 69, 2009. DOI: 10.1016/j.cirpj.2009.08.005
- Amaral, I., Silva, F.J.G., Pinto, G.F.L., Campilho, R.D.S.G., Gouveia, R. M. “Improving the Cut Surface Quality by Optimizing Parameters in the Fibre Laser Cutting Process”, Procedia Manufacturing 38, pp. 1111 – 1120, 2019. DOI: 10.1016/j.promfg.2020.01.199
- Madić, M., Radovanović, M., Gostimirović, M. “Selection of near optimal laser cutting parameters in CO₂ laser cutting by the Taguchi method”, Sborník vědeckých prací Vysoké školy báňské – Technické univerzity Ostrava, Řada strojní 59 (2), pp. 99 – 107, 2013. Available at: http://hdl.handle.net/10084/111751
- Ryazantsev, A., Nechaev, V., Rebrova, S., Vorontsov, B., Bondarenko, O., Protasov, R. “Evaluation of the quality parameters of the surface layer of parts after machining with plasma heating”, Strojnícky časopis – Journal of Mechanical Engineering 74 (1), pp. 123 – 124, 2024. DOI: 10.2478/scjme-2024-0013
- Hrytsay, I., V. Stupnytskyy, V., Slipchuk, A. “Evaluation of the quality parameters of the surface layer of parts after machining with plasma heating”, Strojnícky časopis – Journal of Mechanical Engineering 73 (1), pp. 103 – 116, 2023. DOI: 10.2478/scjme-2023-0008
- Čačko, V., Čačková, I., D. Richtáriková, D., Ľ. Šooš, Ľ. “Investigation of the Dependence of the Technological Parameters of Laser Cutting to Minimize the Deviation from the Nominal Dimensions of the Parts”, Strojnícky časopis – Journal of Mechanical Engineering 74 (3), pp. 1 – 14, 2024. DOI: 10.2478/scjme-2024-0029
- Sejč, P., Jaroš, J., Vanko, B. “Use of Laser Metal Deposition Technology in Additive Manufacturing of Ni Powder Materials”, Strojnícky časopis – Journal of Mechanical Engineering 72 (2), pp. 161 – 172, 2022. DOI: 10.2478/scjme-2022-0026
- Sejč, P., Világoš, T. “FEM Simulation of Thermal Cycles During Laser Welding of Aluminium”, Strojnícky časopis – Journal of Mechanical Engineering 68 (1), pp. 89 – 94, 2018. DOI: 10.2478/scjme-2018-0009
- Keyence, “Digitálny merací systém 7500” [Online]. Available: https://www.keyence.eu/cscz/products/measure-sys/image-measure/im-7000/downloads/
- MicroStep, “ Laserové stroje” [Online]. Available: https://www.microstep.sk/stroje/laserove-stroje/
- Stahlportal, “AISI 304” [Online]. Available: https://www.stahlportal.com/en/stainless-steel/aisi-304/.
Language: English
Page range: 39 - 50
Published on: May 5, 2026
Published by: Slovak University of Technology in Bratislava
In partnership with: Paradigm Publishing Services
Publication frequency: 2 issues per year
Keywords:
Related subjects:
© 2026 Viliam Čačko, Iveta Čačková, Bálint Ferenczi, Ľubomír Šooš, Shane Shabu, Michal Jačmeník, published by Slovak University of Technology in Bratislava
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.