Expanding The Functionality of Lathe Toolholders
References
- Li, D., Jiang, X., Tong, Z., Liam Blunt, L. "Kinematics Error Compensation for a Surface Measurement Probe on an Ultra-Precision Turning Machine", Micromachines 9, 334 p., 2018.
- Kuznetsov Yu., N. "Technological equipment for highly efficient processing of parts on lathes", Yu.N. Kuznetsov, I.V. Lutsiv, O.V. Shevchenko, V.N. Voloshyn. - Кyiv - Ternopil: Ternograf, 692 p, 2011.
- Shevchenko, O.V., Manzyuk S.A. "Using of nano- and micro-positioning drives in ultra-precision processing on machine tools", Bulletin of the Zhytomyr Technical University, № 4 (67) / Series Technical sciences, Zhytomyr, pp. 42–48, 2013.
- Trebuňa, F., Bocko, J., Pastor, M., Lengvarsky, P., Prada, E. "The finite element analysis of high precision positioning system", Strojnícky časopis–Journal of Mechanical Engineering 68 (4), pp. 41–48, 2018. DOI: 10.2478/scjme-2018-0045
- "Micro cutting: Fundamentals and Applications", First Edition. Edited by Kai Cheng, Dehong Huo. John Wiley & Sons, Ltd., 348 p., 2013.
- Shevchenko, O., Belyaeva, A. "Efficiency of kinematic chip breaking on a CNC lathe", Advances in Mechanical Engineering and Transport, Scientific Journal, Lutsk 1 (20), pp. 44–50, 2023.
- Astarloa, A, Beudaert, X., Dombovari, Z., Fernandes, M., Munoa, J. "Application of machine drive oscillations for chip breaking in heavy duty turning operations", 9th CIRP Conference on High Performance Cutting (HPC 2020), Procedia CIRP 101, pp. 110–113, 2021.
- Schwarze, M., Ruger, C., Georgi, O., Rentzsch, H., Patzold, H. "Actuator and Process Development for Vibration Assisted Turning of Steel", Advances in Manufacturing Technology XXXIV, pp. 64–69, 2021.
- Gok, K., Turkes, E., Karakas, Ö., Gok, A. "Analyzing the Effects of Tool Holder Stiffness on Chatter Vibration Reduction in Turning", Journal of Metallic Material Research 06, pp.16–24, 2023.
- Sivareddy, D.V., Krishna, P.V., Gopal, A.V. "Effect of thermo-mechanical loading on machining induced residual stresses in ultrasonic vibration assisted turning of Ti6Al4V alloy", Proc IMechE Part B: Jornal of Engineering Manufacture, pp. 1–14, 2022.
- Ganguli, A., Deraemaeker, A., Horodinca, M., Preumont, A. "Active damping of chatter in machine tools –demonstration with a ‘hardware-in-the-loop’ simulator", Proc. IMechE 219 Part I: J. Systems and Control Engineering, pp. 359–369, 2005.
- Rivin, E. "Tooling Structure: Interface between Cutting Edge and Machine Tool", Annals of the CIRP 49(2), pp. 591–634, 2000.
- Orlykov, M.L. "Dynamics of machine tools: Textbook. manual for universities", - 2nd ed. - Kyiv: Higher School, 272 p., 1989.
- Vnukov, Y., Tryshynh, P., Kozlova, O, Dyadya, S. "Cutter-oscilator with single-degree-of-freedom for the study of cutting vibrations", Strojnícky časopis–Journal of Mechanical Engineering 74 (1), pp. 169–180, 2024. DOI: 10.2478/scjme-2024-0017
- "Toolholder: Patent of Ukraine № 127294: IPC B23B 29/04", Pub. 07/12/2023, Bul. No. 28. - 4 p., 2023.
- Shevchenko, O.V., Manzyuk, S.A. "An effective device for micro-positioning in precision turning", Materials of the 8th International Scientific and Practical Conference "Complex Quality Assurance of Technological Processes and Systems" - Chernihiv, ChNTU: May 14-16, 2019, pp. 63–64, 2019.
- Shevchenko, O.V., Bieliaieva, A.J. "Effective chip breaking at turning processing // Technology and Technique of Typography", Scientific Journal–Kyiv: NTUU „KPI” 4 (30), pp. 131–137, 2010.
- Shevchenko, O.V. "Methods of increasing the stability of the cutting process during turning with non-rigid tooling", Journal of Mechanical Engineering 8 (146). - Kyiv, pp. 16–23, 2009.
- "Toolholder: Utility model patent of Ukraine No. 43535: IPC B23B 25/00", Pub. 25.08.2009, Bull. No. 16.–3 p., 2009.
- Kumabe, D. "Vibrating cutting", Red. I. Portnov, V. V. Belova, D. Kumabe, S. L. Maslennikova–M. : Machinery, 417 p., 1985.
- Sivareddy, D.V., Krishna, P.V., Gopal, A.V. "Effect of thermo-mechanical loading on machining induced residual stresses in ultrasonic vibration assisted turning of Ti6Al4V alloy", Proc IMechE Part B: Jornal of Engineering Manufacture. IMechE, pp. 1–12, 2022.
- Bendigeri, Ch. "Coupled field analysis of amplified piezo actuator by Finite Element Method", Strojnícky časopis–Journal of Mechanical Engineering 62 (3), pp. 143–158, 2011.
- "Device for ultrasonic turning: Utility model patent of Ukraine No. 89116: IPC В24В 1/04", Pub. 10.04.2014, Bull. No. 7.–3 p., 2014.
- Kudynov, V.A. "Self-oscillations at low and high frequencies (movement stability) during cutting", Machine tools and instruments 2, pp.16–21, 1997.
- Shevchenko, O.V., Zharov, A.A. "Effect of orientation of principal axes of stiffness of an elastic-system of the toolholder on a stability of turning process", Bulletin of NTUU "KPI" Series - Mechanical Engineering 67, Kyiv, pp. 68–72, 2013.
- Shevchenko, O.V. "An effective method of increasing the vibration resistance of turning processing", Technological systems, Scientific and technical journal - Kyiv: UkrNIAT, 1 (54). pp. 60–65, 2011.
- "Toolholder: Utility model patent of Ukraine No. 21427: IPC B23B 29/00", Pub. 15.03.2007, Bull. No. 3.–3 p., 2007.
Language: English
Page range: 71 - 86
Published on: Apr 30, 2025
Published by: Slovak University of Technology in Bratislava
In partnership with: Paradigm Publishing Services
Publication frequency: 2 issues per year
Related subjects:
© 2025 Kuznietsov Yurii, Shevchenko Oleksandr, Ľubomir Šooš, published by Slovak University of Technology in Bratislava
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.