References
- Thomas, W. M. “Friction Stir Butt Welding”, International Patent Application No. PCT/GB92. GB Patent Application No. 9125978.8., 1991.
- Chen, C.. Kovacevic, R. “Thermomechanical modelling and force analysis of friction stir welding by the finite element method”, Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 218(5), pp. 509 – 519, 2004. DOI:10.1243/095440604323052292
- Tiwari, A., Pankaj, P., Suman, S., Singh, P., Biswas, P., Pal, S., Rao, A.G. “Effect of plasma preheating on weld quality and tool life during friction stir welding of DH36 steel”, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, p. 0954405421990139, 2021. DOI: 10.1177/ 0954405421990139
- Sinclair, P. C., Longhurst, W. R., Cox, C. D., Lammlein, D.H., Strauss, A. M. Cook, G. E. “Heated friction stir welding: an experimental and theoretical investigation into how preheating influences process forces”, Materials and Manufacturing Processes 25 (11), pp. 1283 – 1291, 2010. DOI: 10.1080/10426914.2010.496122
- Deepati, A. K., Alhazmi, W., Zakri, W., Shaban, E., Biswas, P. “Parametric Analysis on the Progression of Mechanical Properties on FSW of Aluminum-Copper Plates”, Advances in Science and Technology Research Journal 16(2), pp. 168 – 178. 2022. DOI: 10.12913/22998624/147123
- Hattingh, D. G., Blignault, C., Van Niekerk, T. I. and James, M. N. “Characterization of the influences of FSW tool geometry on welding forces and weld tensile strength using an instrumented tool”, Journal of materials processing technology 203(1-3), pp. 46 – 57, 2008. DOI: 10.1016/j.jmatprotec.2007.10.028
- Fratini, L., Buffa, G., Palmeri, D., Hua, J., Shivpuri, R. “Material flow in FSW of AA7075–T6 butt joints: numerical simulations and experimental verifications”, Science and Technology of Welding and Joining 11(4), pp. 412 – 421, 2006. DOI: 10.1179/174329306X113271
- Emamian, S.S., Awang, M., Yusof, F., Sheikholeslam, M. Mehrpouya, M. “Improving the friction stir welding tool life for joining the metal matrix composites”, The International Journal of Advanced Manufacturing Technology 106(7), pp. 3217 – 3227, 2020. DOI: 10.1007/s00170-019-04837-1
- Panneerselvam, K., Lenin, K. “Investigation on effect of tool forces and joint defects during FSW of polypropylene plate”, Procedia engineering 38, pp. 3927 – 3940, 2012. DOI: 10.1016/j.proeng.2012.06.450
- Balasubramanian, N., Gattu, B. Mishra, R. S. “Process forces during friction stir welding of aluminium alloys”, Science and technology of welding and joining 14(2), pp. 141 – 145, 2009. DOI: 10.1179/136217108X372540
- Chen, C. M., Kovacevic, R. “Joining of Al 6061 alloy to AISI 1018 steel by combined effects of fusion and solid state welding”, International Journal of Machine Tools and Manufacture 44(11), pp. 1205 – 1214, 2004. DOI: 10.1016/j.ijmachtools.2004.03.011
- Almoussawi, M. Smith, A.J. “Thermo-mechanical effect on poly crystalline boron nitride tool life during friction stir welding (dwell period)”, Metals and Materials International 24(3), pp. 560 – 575, 2018. DOI: 10.1007/s12540-018-0074-y
- Sahlot, P., Jha, K., Dey, G. K., Arora, A. “Quantitative wear analysis of H13 steel tool during friction stir welding of Cu-0.8% Cr-0.1% Zr alloy”, Wear 378, pp. 82 – 89, 2017. DOI: 10.1016/j.wear.2017.02.009
- Prater, T. “Friction stir welding of metal matrix composites for use in aerospace structures”, Acta Astronautica 93, pp. 366 – 373, 2014. DOI: 10.1016/j.actaastro.2013.07.023
- Siddiquee, A. N., Pandey, S. “Experimental investigation on deformation and wear of WC tool during friction stir welding (FSW) of stainless steel”, The International Journal of Advanced Manufacturing Technology 73(1-4), pp. 479 – 486, 2014. DOI: 10.1007/s00170-014-5846-z
- Sahlot, P., Jha, K., Dey, G. K., Arora, A. “Wear-induced changes in FSW tool pin profile: effect of process parameters”, Metallurgical and Materials Transactions A 49(6), pp. 2139 – 2150, 2018. DOI: 10.1007/s11661-018-4580-9
- Mastanaiah, P., Sharma, A., Reddy, G. M. “Role of hybrid tool pin profile on enhancing welding speed and mechanical properties of AA2219-T6 friction stir welds”, Journal of Materials Processing Technology 257, pp. 257 – 269, 2018. DOI: 10.1016/j.jmatprotec.2018.03.002
- Banik, A., Saha, A., Barma, J. D., Acharya, U. Saha, S. C. “Determination of best tool geometry for friction stir welding of AA 6061-T6 using hybrid PCA-TOPSIS optimization method”, Measurement 173, p. 108573, 2021. DOI: 10.1016/j.measurement.2020.108573
- Dialami, N., Chiumenti, M., Cervera, M., Segatori, A., Osikowicz, W. “Enhanced friction model for Friction Stir Welding (FSW) analysis: Simulation and experimental validation”, International Journal of Mechanical Sciences 133, pp. 555 – 567, 2017. DOI: 10.1016/j.ijmecsci.2017.09.022
- Jagadeesha, C. B. “Analysis and design of friction stir welding tool”, Journal of the Mechanical Behavior of Materials 25(5-6), pp.179 – 182, 2016. DOI:10.1515/jmbm-2017-0006
- Alwin, Allawi H., Ksibi, Hatem, Driss, Zied and Alalkawi, Hussain J. M. “Fatigue Variable Loading Under Combined High Temperature and Shot Peening Treatment for AA2024-T4 and AA2024-T361”, Strojnícky časopis – Journal of Mechanical Engineering 73(1), pp. 1 – 12. 2023. DOI: 10.2478/scjme-2023-0001
- Moltasov, A., Tkach, P., Ustynenko, O., Protasov, R. “Effect of Misalignment of Axes in Double-Sided Weld on Stresses Distribution in Butt Welded Joints”, Strojnícky časopis – Journal of Mechanical Engineering 73(1), pp. 137 – 146, 2023. DOI: 10.2478/scjme-2023-0011
- Johnsen, S. E. J., Doner, M. “A statistical simulation model of Miner’s rule”, ASME. J. Eng. Mater. Technol 103(2), pp. 112 – 117, 1981. DOI: 10.1115/1.3224981
- Su, H., Wu, C. S., Pittner, A., Rethmeier, M. “Simultaneous measurement of tool torque, traverse force and axial force in friction stir welding”, Journal of Manufacturing processes 15(4), pp. 495 – 500, 2013. DOI: 10.1016/j.jmapro.2013.09.001
- Pankaj, P., Tiwari, A., Biswas, P., Rao, A.G. “Plasma-Assisted Hybrid Dissimilar Friction Stir Welding for Joining of DH36 Steel and AISI 1008 Steel: Thermal Modelling and Experimental Analysis”, Arabian Journal for Science and Engineering, 46, pp.7929 – 7952, 2021. DOI:10.1007/s13369-021-05574-y
- Biswas P., A Kumar D., Mandal NR. “Friction stir welding of aluminum alloy with varying tool geometry and process parameters”, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 226(4), pp. 641 – 648, 2012. DOI: 10.1177/0954405411424111
- Kumar, D. A., Biswas, P., Tikader, S, M. M. Mahapatra, N. R. Mandal. “A study on friction stir welding of 12mm thick aluminum alloy plates”, J. Marine. Sci. Appl. 12, pp. 493 – 499, 2013. DOI: 10.1007/s11804-013-1221-y