Meshing Characteristics of Profile Shifted Cylindrical Quasi-Involute Arc-Tooth-Trace Gears. Part 2. Calculation Results

Tkach, Pavlo; Reviakina, Olga; Kryvosheia, Anatolii; Melnyk, Volodymyr; Ustynenko, Oleksandr; Protasov, Roman

doi:10.2478/scjme-2023-0032

Abstract

Based on the results obtained in the previous research, the values of meshing characteristics of profile shifted quasi-involute arc-tooth-trace gears is calculated. The influence of the values of profile shift coefficient and the angle of tooth trace on meshing characteristic distribution on the tooth flank surface along tooth trace is defined. The results can be used for design of profile shifted quasi-involute arc-tooth-trace gears, cut by Gleason-type cutters with different profile angle value.

References

Gupta, K., Laubscher, R. F., Davim, J. P., Jain, N. K. “Recent developments in sustainable manufacturing of gears: a review”, Journal of Cleaner Production, 112 (4), pp. 3320 – 3330, 2016. DOI: 10.1016/j.jclepro.2015.09.133
Search in Google Scholar Back to article
Kuleshkov, Yu., Chernovol, M., Mahopets, S., Bevz, O., Vorontsov, B., Kyrychenko, I., Protasov, R. “Simulation of the Instant Supply in Gear Hydraulic Machines”, Strojnícky časopis – Journal of Mechanical Engineering 73(1), pp. 125 – 136, 2023. DOI: 10.2478/scjme-2023-0010
Search in Google Scholar Back to article
Kuleshkov, Yu. V., Rudenko, T. V., Krasota, M. V., Bošanský, M., Tóth, F. “Performance Features of Tooth Gearing in Gear Hydraulic Machines”, Acta Technologica Agriculturae, 24(2), pp.84-91, 2021. DOI: 10.2478/ata-2021-0014
Search in Google Scholar Back to article
“Global Gear Technology Market By Technology (Bevel Gear Technology, Cylindrical Gear Technology, Precision Technology, and Drive Technology), By Geographic Scope And Forecast”. Published Date: Jun 2021. Available at: https://www.verifiedmarketresearch.com/product/gear-technology-market/
Search in Google Scholar Back to article
Errichello, R. “Herringbone Gears”, In: Wang, Q.J., Chung, YW. (eds) Encyclopedia of Tribology. Springer, Boston, USA, pp. 1638 – 1639, 2013. DOI: 10.1007/978-0-387-92897-5_583
Search in Google Scholar Back to article
Hrytsay, I., Stupnytskyy, V. Slipchuk, A. “Simulation of a Power Skiving Gear Cutting Process”, Strojnícky časopis – Journal of Mechanical Engineering 73(1), pp.103 – 116, 2023. DOI: 10.2478/scjme-2023-0008
Search in Google Scholar Back to article
Bauer, R., Dix, M. “Novel method for manufacturing herringbone gears by power skiving”, Procedia CIRP, 112, pp. 310 – 315, 2022. DOI: 10.1016/j.procir.2022.09.003.
Search in Google Scholar Back to article
Yaoguo, M. A., Zhang, X., Fang, Z., Yin, X., Xu, Y. “A new analysis technology of the vibration characteristic of the gearbox case of herringbone gear reducer”, Applied Acoustics 205, 109289, 2023. DOI: 10.1016/j.apacoust.2023.109289.
Search in Google Scholar Back to article
Xu, X., Jiang, G., Wang, H., Liang, X. “Investigation on dynamic characteristics of herringbone planetary gear system considering tooth surface friction”, Meccanica 57, pp. 1677 – 1699, 2022. DOI: 10.1007/s11012-022-01526-4
Search in Google Scholar Back to article
Wang, S., Zhu, R. “Research on dynamics and failure mechanism of herringbone planetary gearbox in wind turbine under gear surface pitting”, Engineering Failure Analysis 146, 107130, 2023. DOI: 10.1016/j.engfailanal.2023.107130
Search in Google Scholar Back to article
Zhou, C., Ning, L., Wang, H., Tang, L. “Effects of centring error and angular misalignment on crack initiation life in herringbone gears”, Engineering Failure Analysis, 120, 105082, 2021. DOI: 10.1016/j.engfailanal.2020.105082
Search in Google Scholar Back to article
Ren, F., Luo, G., Shi, G., Wu, X., Wang, N. “Influence of manufacturing errors on dynamic floating characteristics for herringbone planetary gears”, Nonlinear Dynamics, 93, pp. 361 – 372, 2018. DOI: 10.1007/s11071-018-4197-y
Search in Google Scholar Back to article
Xiao, Z., Shi, X., Wang, X., Ma, X., Han Y. “Lubrication analysis and wear mechanism of heavily loaded herringbone gears with profile modifications in full film and mixed lubrication point contacts”, Wear 477, 203790, 2021. DOI: 10.1016/j.wear.2021.203790
Search in Google Scholar Back to article
Zhou, C., Pan, L., Xu, J., Han, X. “Non-Newtonian thermal elastohydrodynamic lubrication in point contact for a crowned herringbone gear drive”, Tribology International 116, pp. 470 – 481, 2017. DOI: 10.1016/j.triboint.2017.08.007.
Search in Google Scholar Back to article
Zou, H., Wang, S., Li, F., Liu, L., Li, L., Li, Zh. “Improved algorithm of tooth surface topological modification and nonlinear dynamic analysis of herringbone gears”, Mechanism and Machine Theory 180, 105151, 2023, DOI: 10.1016/j.mechmachtheory.2022.105151
Search in Google Scholar Back to article
Li, Zh., Wang, S., Li, L., Liu, L., Li, F., Zou, H. “Study on multi-clearance nonlinear dynamic characteristics of herringbone gear transmission system under optimal 3d modification”, Nonlinear Dynamics 111, pp. 4237 – 4266, 2023. DOI: 10.1007/s11071-022-08083-1
Search in Google Scholar Back to article
Wang, X., Ruan, J., Wang, Y., Ji, Sh., An, S. “Optimal design of gears contact interface modification for an objective as minimum impact resistance of initial meshing-in time domain”, Meccanica 56, pp. 303 – 316, 2021. DOI: 10.1007/s11012-020-01293-0
Search in Google Scholar Back to article
Lee, C. K., Hsieh, C. L., Ruan, J. C., Wang, C. Y. “Simulation of Meshing of Herringbone Double Circular-Arc Helical Gears using Multibody Dynamic Analysis Software”, Journal of Physics: Conference Series, 2287, 012023, 2022. DOI: 10.1088/1742-6596/2287/1/012023
Search in Google Scholar Back to article
Peng, Y., Song, A., Shen, Y., Lin, X. “A novel arc-tooth-trace cycloid cylindrical gear”, Mechanism and Machine Theory 118, pp. 180 – 193, 2017. DOI: 10.1016/j.mechmachtheory.2017.08.009
Search in Google Scholar Back to article
Wei, Y., Guo, R., Liu, Y., Dong, Ch., Li, D., Wan, A., Zhao, G. “Analytical Calculation of the Tooth Surface Contact Stress of Cylindrical Gear with Variable Hyperbolic Circular-Arc-Tooth-Trace”, Symmetry 12, 1318; 2020. DOI: 10.3390/sym12081318
Search in Google Scholar Back to article
Wei, Y., Yang, D., Guo, R.,, Ren, Zh., Li, Z., Luo, L. “Integrated wear prediction model for cylindrical gear with variable hyperbolic circular arc tooth trace under mixed elastohydrodynamic lubrication”, Journal of Mechanical Science and Technology 36, pp. 4053 – 4065, 2022. DOI: 10.1007/s12206-022-0726-1
Search in Google Scholar Back to article
Shishov, V. P., Nosko, P. L., Revjakina, O. A. “Cylindrical arc-tooth-trace gears”, Volodymyr Dahl EUNU Publ., Luhans’k, Ukraine, 2004. (In Russian)
Search in Google Scholar Back to article
Zhijun, S., Li, H., Jinge, W., Wei, L., Qinglin, C. “Contact strength analysis of circular-arc-tooth-trace cylindrical gear”, Journal of the Brazilian Society of Mechanical Sciences and Engineering 38(3), pp. 999 – 1005, 2014. DOI: 10.1007/s40430-014-0272-6
Search in Google Scholar Back to article
Zhang, Q., Hou, L., Tang, R., Wen, G. “Method of Processing and an Analysis of Meshing and Contact of Circular Arc Tooth Trace Cylindrical Gears”, Transactions of FAMENA 40(4), pp. 11 – 24, 2016. DOI: 10.21278/TOF.40402
Search in Google Scholar Back to article
Nosko, P., Bashta, О., Lysenko, A., Tkach, P., Bashta, A. “Arched Gears Teeth Geometry within Reference Profile Shift”. Problems of Friction and Wear 4, pp. 69 – 75, 2019. DOI: 10.18372/0370-2197.4(85).13874
Search in Google Scholar Back to article
Tkach, P., Reviakina, O., Kryvosheia, A., Melnyk, V., Ustynenko, O., Protasov, R. “Meshing Characteristics of Profile Shifted Cylindrical Quasi-Involute Arc-Tooth-Trace Gears. Part 1. Theoretical Base”, Strojnícky časopis – Journal of Mechanical Engineering 72(2), pp.201 – 210, 2022. DOI: 10.2478/scjme-2022-0029
Search in Google Scholar Back to article
Linke, H., Börner, J., Heß, R. “Cylindrical Gears”, Carl Hanser Verlag, Munich, Germany, 2016. ISBN 978-1-56990-489-3
Search in Google Scholar Back to article

Meshing Characteristics of Profile Shifted Cylindrical Quasi-Involute Arc-Tooth-Trace Gears. Part 2. Calculation Results

Abstract

Paradigm

My account