References
- Chen, L., Li, B., Jiang, Z. “Inspection of assembly error with effect on throat and incidence for turbine blades”, Journal of Manufacturing Systems 43, pp. 366 – 374. Special Issue on the 12th International Conference on Frontiers of Design and Manufacturing, 2017.
- Eret, P., Hoznedl, M., “Effect of manufacturing processes on blade throat size and position in a steam turbine diaphragm”, Journal of Machine Engineering 22(3), pp. 148 – 160, 2022.
- Eret, P., Hoznedl, M. “Analysis of geometric errors of throat sizes of last stage blades in a mid-size steam turbine”, Journal of Machine Engineering, 22(3), pp. 132 – 147, 2022.
- Bodzâs, S. “Manufacturing analysis of face milling technology by tool setting using the same initial parameters”, Strojnícky časopis – Journal of Mechanical Engineering 73(1), pp. 13 – 24, 2023. DOI: 10.2478/scjme-2023-0002
- Nowinski, M., Panovsky, J. “Flutter Mechanisms in Low Pressure Turbine, Blades”, Journal of Engineering for Gas Turbines and Power 122(1), 10, pp. 82 – 88m 2000.
- Vogt, D. M., Fransson, T. H. “Experimental Investigation of Mode Shape Sensitivity of an Oscillating Low-Pressure Turbine Cascade at Design and Off-Design Conditions”, Journal of Engineering for Gas Turbines and Power 129(2), 08, pp. 530 – 541, 2007.
- Waite, J. J., Kielb, R. E., “Physical Understanding and Sensitivities of Low Pressure Turbine Flutter”, Journal of Engineering for Gas Turbines and Power 137(1), 08. 012502, 2015.
- Waite, J. J., Kielb, R. E. “The Impact of Blade Loading and Unsteady Pressure Bifurcations on Low-Pressure Turbine Flutter Boundaries”. Journal of Turbomachinery 138(4), 12, 041002, 2016.
- Corral, R., Vega, A. “The Low Reduced Frequency Limit of Vibrating Airfoils—Part I: Theoretical Analysis”, Journal of Turbomachinery 138(2), 11, 021004, 2016.
- Vega, A., Corral, R. “The Low Reduced Frequency Limit of Vibrating Airfoils—Part II: Numerical Experiments”, Journal of Turbomachinery 138(2), 11, 021005, 2016.
- Corral, R., Vega, A. “Quantification of the Influence of Unsteady Aerodynamic Loading on the Damping Characteristics of Airfoils Oscillating at Low-Reduced Frequency—Part I: Theoretical Support”, Journal of Turbomachinery, 139(3), 12. 031009, 2017.
- Ekici, K., Kielb, R. E., Hall, K. C. “The effect of aerodynamic asymmetries on turbomachinery flutter”, Journal of Fluids and Structures, 36, pp. 1 – 17, 2013.
- Peeren, C., Vogeler, K. “Geometrical Modification of the Unsteady Pressure to Reduce Low-Pressure Turbine Flutter”, Journal of Turbomachinery 139(9), 05, 091011, 2017.
- Hanamura, Y., Tanaka, H., Yamaguchi, K. “A simplified method to measure unsteady forces acting on the vibrating blades in cascade”, Bulletin of JSME 23(180), pp. 880 – 887, 1980.
- Buffum, D. H., Fleeter, S. “Oscillating cascade aerodynamics by an experimental influence coefficient technique”, Journal of Propulsion and Power 6(5), pp. 612 – 620, 1990.
- Eret, P., Meskell, C. “A practical approach to parameter identification for a lightly damped, weakly nonlinear system”, Journal of Sound and Vibration 310(4), pp. 829 – 844, 2008.
- Zhang, W., Lv, Z., Diwu, Q., Zhong, H. “A flutter prediction method with low cost and low risk from test data”, Aerospace Science and Technology 86, pp. 542–557, 2019.
- Kudláček, P., Novotný, P., Vacula, J., Kocman, F. “Investigating the effect of rotor design changes on mechanical losses due to rotor-fluid interaction”. Strojnícky časopis – Journal of Mechanical Engineering 72(3), pp. 71 – 80, 2022. DOI: 10.2478/scjme-2022-0042
- Ma, H., Jin, C., Wei, W. “Experimental investigation of effects of suction side squealer tip on the aeroelastic stability of a linear oscillating compressor cascade”, Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering 231(11), pp. 2120 – 2131, 2017.
- Seeley, C. E., Wakelam, C., Zhang, X., Hofer, D., Ren, W.-M., “Investigations of Flutter and Aerodynamic Damping of a Turbine Blade: Experimental Characterization”, Journal of Turbomachinery 139(8), 04, 081011, 2017.
- Malzacher, L., Geist, S., Motta, V., Peitsch, D., Hennings, H. “A Low-Speed Compressor Test Rig for Flutter Investigations”, Journal of Turbomachinery 141(5), 01. 051009, 2019.
- Jutur, P., Govardhan, R. N. “Flutter in Started and Unstarted Transonic Linear Cascades: Simultaneous Measurements of Unsteady Loads and Shock Dynamics”. Journal of Turbomachinery 141(12), 11, 121004, 2019.
- Hill, G., Gambel, J., Schneider, S., Peitsch, D., Stapelfeldt, S. “Aeroelastic stability of combined plunge-pitch mode shapes in a linear compressor cascade”, International Journal of Turbomachinery, Propulsion and Power 7(1), 2022.
- Vogel, K., Naidu, A. D., and Fischer, M. “Comparison of the Influence Coefficient Method and Travelling Wave Mode Approach for the Calculation of Aerodynamic Damping of Centrifugal Compressors and Axial Turbines”, In Turbo Expo: Power for Land, Sea, and Air, Vol. Volume 7B: Structures and Dynamics, V07BT36A022, 2017.
- Buchwald, P., Farahmand, A., Vogt, D. M. “On the Influence of Blade Aspect Ratio on Aerodynamic Damping”, Journal of Turbomachinery 141(10), 09, 101007, 2019.
- Tsimbalyuk, V., “Method of measuring transient aerodynamic forces and moments on a vibrating cascade”, Strength of Materials 28, pp. 150 – 157, 1996.
- Slama, V., Rudas, B., Ira, J., Macalka, A., Eret, P., Tsymbalyuk, V. “Experimental and CFD Investigation of Aerodynamic Forces and Moments in a Linear Turbine Blade Cascade”, In ASME International Mechanical Engineering Congress and Exposition, Vol. Volume 4A: Dynamics, Vibration, and Control, V04AT06A041. 2018.
- Slama, V., Rudas, B., Ira, J., Macalka, A., Eret, P., Tsymbalyuk, V. “The Validation of Flutter Prediction in a Linear Cascade of Non-Rigid Turbine Blades”, In Turbo Expo: Power for Land, Sea, and Air 7C: Structures and Dynamics, V07CT36A010, 2018.
- Slama, V., Rudas, B., Ira, J., Macalka, A., Eret, P., Tsymbalyuk, V. “Subsonic Stall Flutter of a Linear Turbine Blade Cascade Using Experimental and CFD Analysis”, In ASME International Mechanical Engineering Congress and Exposition 7A: Dynamics, Vibration, and Control, V07AT07A026, 2020.
- Fürst, J., Lasota, M., Lepicovsky, J., Musil, J., Pech, J., Šidlof, P., Šimurda, D., “Effects of a single blade incidence angle offset on adjacent blades in a linear cascade”, Processes 9(11), 2021.
- Eret, P., Tsymbalyuk, V. “Experimental Subsonic Flutter of a Linear Turbine Blade Cascade With Various Mode Shapes and Chordwise Torsion Axis Locations”, Journal of Turbomachinery 145(6), 6, 061002, 2023.
- Tsymbalyuk, V., Linhart, J. “Corrections of aerodynamic loadings measurement on vibrating airfoils”, In Proceedings of XVII IMEKO World Congress, Dubrovnik, Croatian Metrology Society, pp. 358 – 361, 2003.
- Hirsch, C. “Advanced methods for cascade testing”, AGARD-AG-328, 1993.