Use of Laser Metal Deposition Technology in Additive Manufacturing of Ni Powder Materials

Sejč, Pavol; Jaroš, Ján; Vanko, Branislav

doi:10.2478/scjme-2022-0026

Abstract

The process parameters of the Laser Metal Deposition technology in the production of simple components made of NiCuBSi type metal powder were verified in this paper. A laser head with a coaxial powder supply and argon gas was used in the production. The powder was welded to a S235J2G3 steel plate. The used parameters (heat input 0.25 kJ.mm⁻¹) enabled the production of samples with a minimum porosity (1.2 %) and without the defects (cold joints, pores) between the weld layers.

References

[1] DebRoy, T., Wei, H. L., Zuback, J. S., Mukherjee, T., Elmer, J.W., Milewski, J. O., Beese, A. M., Wilson-Heid, A., De, A., Zhang, W. “Additive manufacturing of metallic components – Process, structure and properties”, Progress in Materials Science 92, pp. 112 – 224, 2018. DOI: 10.1016/j.pmatsci.2017.10.001
Open DOI Search in Google Scholar Back to article
[2] Magerramova, L., Volkov, M., Svinareva, M., Siversky, A. “The use of additive technologies to create lightweight parts for gas turbine engine compressors”, In: Proceedings of ASME Turbo Expo 2018 Turbomachinery Technical Conference and Exposition GT2018, Oslo, Norway, pp. 1 – 7, 2018.
Search in Google Scholar Back to article
[3] Hae-Sung, Y., Jang-Yeob, L., Hyung-Soo, K., Min-Soo, K., Eun-Seob, K., Yong-Jun, S., Won-Shik, Ch., Sung-Hoon, A. “A Comparison of Energy Consumption in Bulk Forming, Subtractive, and Additive Processes: Review and Case Study”, International Journal of Precision Engineering and Manufacturing-Green Technology 1 (3), pp. 261 – 279, 2014. DOI: 10.1007/s40684-014-0033-0
Open DOI Search in Google Scholar Back to article
[4] Thompson, M. K., Moroni, G., Vaneker, T., Fadel, G., Campbell, R. I., Gibson, I., Bernard, A., Schulz, J., Graf, P., Ahuja, B., Martina, F. “Design for Additive Manufacturing: Trends, Opportunities, Considerations and Constraints”, CIRP Annals – Manufacturing Technology 65 (2), pp. 737 – 760, 2016. DOI: 10.1016/j.cirp.2016.05.004
Open DOI Search in Google Scholar Back to article
[5] Herzog, D., Seyda, V., Wycisk, E., Emmelmann, C. “Additive manufacturing of metals”, Acta Materialia 117, pp. 371 – 392, 2016. DOI: 10.1016/j.actamat.2016.07.019
Open DOI Search in Google Scholar Back to article
[6] Castro e Costa, E., Pinto Duarte, J., Bártolo, P. “A review of additive manufacturing for ceramic production”, Rapid Prototyping Journal, 23/5, pp. 954 – 963, 2017. DOI: 10.1108/RPJ-09-2015-0128
Open DOI Search in Google Scholar Back to article
[7] Tuominen, J., Kaubisch, M., Thieme, S., Nakki, J., Nowotny, S., Vuoristo, P. “Laser strip cladding for large area metal deposition”, Additive Manufacturing 27, pp. 208 – 216, 2019. DOI: 10.1016/j.addma.2019.01.008
Open DOI Search in Google Scholar Back to article
[8] Handrik M., Vaško M., Majko J., Sága M., Dorčiak F. “Influence of the Shape of the Test Specimen Produced by 3D Printing on the Stress Distribution in the Matrix and in Long Reinforcing Fibers”, Strojnícky časopis – Journal of Mechanical Engineering 69 (3), pp. 61 – 68, 2019. DOI: 10.2478/scjme-2019-0030
Open DOI Search in Google Scholar Back to article
[9] Dimić A., Mišković Ž., Mitrović R., Ristivojević M., Stamenić Z., Danko J., Bucha J., Milesich T. “The Influence of Material on the Operational Characteristics of Spur Gears Manufactured by the 3D Printing Technology”, Strojnícky časopis – Journal of Mechanical Engineering 68 (3), pp. 261 – 270, 2018. DOI: 10.2478/scjme-2018-0039
Open DOI Search in Google Scholar Back to article
[10] ASTM F2792-12. “Standard Terminology for Additive Manufacturing Technologies”, 2012.
Search in Google Scholar Back to article
[11] Murr, L. E., Gaytan, S. M., Ramirez, D. A., Martinez, E., Hernandez, J., Amato, K. N., Shindo, P. W., Medina, F. R., Wicker, R. B. “Metal Fabrication by Additive Manufacturing Using Laser and Electron Beam Melting Technologies”, Journal of Material Science Technology 28 (1), pp. 1 – 14, 2012.
Search in Google Scholar Back to article
[12] Schmidt, M., Merklein, M., Bourell, D., Dimitrov, D., Hausotte, T., Wegener, K., Overmeyer, L., Vollertsen, F., Levy, G. N. “Laser based additive manufacturing in industry and academia”, CIRP Annals - Manufacturing Technology 66, pp. 561 – 583, 2017. DOI: 10.1016/j.cirp.2017.05.011
Open DOI Search in Google Scholar Back to article
[13] Lei Y., Yitao Ch., Frank L. “Additive manufacturing of functionally graded metallic materials using laser metal deposition”, Additive Manufacturing 31, pp. 1 – 11, 2020. DOI: 10.1016/j.addma.2019.100901
Open DOI Search in Google Scholar Back to article
[14] Kruth, J. P., Wang, X., Laoui, T., Froyen, L. “Lasers and materials in selective laser sintering”, Assembly Automation 23 (4), pp. 357 – 371, 2003. DOI: 10.1108/01445150310698652
Open DOI Search in Google Scholar Back to article
[15] “Velcome to SLM Solutions”. [online] Available at: www.slm-solutions.com [Accessed: 14-12-2021].
Search in Google Scholar Back to article
[16] Yap, C. Y., Chua, C. K., Dong, Z. L., Liu, Z. H., Zhang, D. Q., Loh, L. E., Sing, S. L. “Review of selective laser melting: Materials and applications”, Applied Physics Reviews 2, 041101, 2015. DOI: 10.1063/1.4935926
Open DOI Search in Google Scholar Back to article
[17] Atwood, C., Griffith, M., Harwell, L., Schlienger E., Ensz M., Smugeresky J., Romero T., Greene D., Reckaway D. “Laser engineered net shaping (LENS^™): A tool for direct fabrication of metal parts”. In: 17th International Congress on Applications of Lasers and Elector-Optics; Orlando, USA, 1998. DOI: 10.2351/1.5059147
Open DOI Search in Google Scholar Back to article
[18] Akbari, M., Kovacevic, R. “An investigation on mechanical and microstructural properties of 316LSi parts fabricated by a robotized laser/wire direct metal deposition system”, Additive Manufacturing 23, pp. 487 – 497, 2018. DOI: 10.1016/j.addma.2018.08.031
Open DOI Search in Google Scholar Back to article
[19] Elif Karayel, K., Yahya Bozkurtb, Y. “Additive manufacturing method and different welding applications”, Journal of Materials Research and Technology 9 (5), pp. 11424 – 11438, 2020. DOI: 10.1016/j.jmrt.2020.08.039
Open DOI Search in Google Scholar Back to article
[20] Zhanga, K., Liua, W., Shanga, X. “Research on the processing experiments of laser metal deposition shaping”, Optics & Laser Technology 39, pp. 549 – 557, 2007. DOI: 10.1016/j.optlastec.2005.10.009
Open DOI Search in Google Scholar Back to article
[21] de Oliveira, U., Ocelík, V., De Hosson, J. Th. M. “Analysis of coaxial laser cladding processing conditions”, Surface & Coatings Technology 197, pp. 127 – 136, 2005. DOI: 10.1016/j.surfcoat.2004.06.029
Open DOI Search in Google Scholar Back to article
[22] Arnold, J., Volz, R. “Laser Powder Technology for Cladding and Welding”, Journal of Thermal Spray Technology 8 (2), pp. 243 – 248, 1999.
Search in Google Scholar Back to article
[23] Zhenglong, L., Kezhao, Z., Heng, Z., Longchang, N., Yanbin, Ch. “A comparative study of microstructure and tensile properties of Ti2AlNbjoints prepared by laser welding and laser-additive welding with theaddition offiller powder”. Journal of Materials Processing Technology 255, pp. 477 – 487, 2018. DOI: 10.1016/j.jmatprotec.2017.12.044
Open DOI Search in Google Scholar Back to article
[24] Caiazzo, F., Alfieri, V. “Optimization of laser beam welding of steel parts made by additive manufacturing”, The International Journal of Advanced Manufacturing Technology 114, pp. 3123 – 3136, 2021. DOI: 10.1007/s00170-021-07039-w
Open DOI Search in Google Scholar Back to article
[25] Danielewski, H., Antoszewski, B. “Properties of Laser Additive Deposited Metallic”, Open Engineering 10, pp. 484 – 490, 2020. DOI: 10.1515/eng-2020-0046
Open DOI Search in Google Scholar Back to article
[26] Geng, Y., Konovalov, S. V., Chen, X. “Research Status and Application of the High-Entropy and Traditional Alloys Fabricated via the Laser Cladding “, Progress in Physics of Metals 21 (1), pp. 26 – 45, 2020. DOI: 10.15407/ufm.21.01.026
Open DOI Search in Google Scholar Back to article
[27] Mahamood, R. M. “Laser metal deposition process of metals, alloys, and composite materials”, Springer, Cham, Switzerland, 2018. DOI: 10.1007/978-3-319-64985-6
Open DOI Search in Google Scholar Back to article
[28] Kai, Z., Shijie, W., Weijun, L., Xiaofeng, S. “Characterization of stainless steel parts by Laser Metal Deposition”, Materials and Design 55, pp. 104 – 119, 2014. DOI: 10.1016/j.matdes.2013.09.006
Open DOI Search in Google Scholar Back to article
[29] Awd, M., Tenkamp, J., Hirtler, M., Siddique, S., Bambach, M, Walther, F. “Comparison of Microstructure and Mechanical Properties of Scalmalloy^® Produced by Selective Laser Melting and Laser Metal Deposition”, Materials 11 (1), pp. 1 – 17, 2018. DOI: 10.3390/ma11010017
Open DOI Search in Google Scholar Back to article
[30] Chor, Y. Y., Hongyi, K. T., Zhenglin, D., Chee, K. Ch. “Selective laser melting of nickel powder”, Rapid Prototyping Journal 23(4), pp. 750 – 757, 2017. DOI: 10.1108/RPJ-01-2016-0006
Open DOI Search in Google Scholar Back to article
[31] Babu, S. S., Raghavan, N., Raplee, J., Foster, S. J., Frederick, C., Haines, M., Dinwiddie, R., Kirka, M. K., Plotkowski, A., Lee, Y., Dehoff, R. R. “Additive Manufacturing of Nickel Superalloys: Opportunities for Innovation and Challenges Related to Qualification”, Metallurgical and Materials Transactions A 49A, pp. 3764 – 3780, 2018. DOI: 10.1007/s11661-018-4702-4
Open DOI Search in Google Scholar Back to article
[32] Liang, Y. J., Cheng X., Li J., Wang, H. M. “Microstructural control during laser additive manufacturing of single-crystalnickel-base superalloys: New processing– microstructure maps involving powder feeding”, Materials & Design 130, pp. 197 – 207, 2017. DOI: 10.1016/j.matdes.2017.05.066
Open DOI Search in Google Scholar Back to article
[33] Shishkovsky, I., Kakovkina, N., Sherbakof, V. “Mechanical properties of NiCrBSi self-fluxing alloy after LPBF with additional heating”, Procedia CIRP 94, pp. 217 – 221, 2020. DOI: 10.1016/j.procir.2020.09.041
Open DOI Search in Google Scholar Back to article
[34] Hu, D., Liu, Y., Chen, H., Liu, J., Wang, M., Deng, L. “Microstructure and properties of Ta-reinforced NiCuBSi + WC composite coating deposited on 5Cr5MoSiV1 steel substrate by laser cladding”, Optics & Laser Technology 142, 107210, pp. 1 – 10, 2021. DOI: 10.1016/j.optlastec.2021.107210
Open DOI Search in Google Scholar Back to article
[35] Karimi, M. R., Salimijazi, H. R., Golozar, M. A. “Effects of remelting processes on porosity of NiCrBSi flame sprayed coatings”, Surface Engineering 32 (3), pp. 238 – 243, 2015. DOI: 10.1179/1743294415Y.0000000107
Open DOI Search in Google Scholar Back to article
[36] Vencl, A., Katavić, B., Marković, D., Ristić, M., Gligorijević, B. “The Tribological Performance of Hardfaced Thermal Sprayed Coatings”, Tribology in Industry 37 (3), pp. 320 – 329, 2015.
Search in Google Scholar Back to article
[37] Iždinská, Z., Nasher, A., Iždinský, K. “The Structure and Mechanical Properties of NiCrBSi Coatings Prepared by Laser beam Cladding”, Materials Engineering 17 (1), pp. 11 – 16, 2010.
Search in Google Scholar Back to article
[38] “Kovové prášky”. [online] http://www.vuz.sk/uploads/wysiwyg/katal%C3%B3gy/10_Kovove_prasky.pdf [Accessed: 15-12-2021].
Search in Google Scholar Back to article
[39] Caron, J. L., Sowards, J. W. “6.09 - Weldability of Nickel-Base Alloys”, In: Hashmi S., Van Tyne Ch. J., Gilmar G. F., Yilbas B. Comprehensive Materials Processing 6: Welding and Bonding technologies. 1^st edition, Elsevier, pp. 50 – 75, 2014. DOI: 10.1016/B978-0-08-096532-1.00615-4
Open DOI Search in Google Scholar Back to article

Use of Laser Metal Deposition Technology in Additive Manufacturing of Ni Powder Materials

Abstract

Paradigm

My account