References
- [1] Atarer, F., Korkmaz, K., Kiper, G. “Design alternatives of network of Altmann linkages”, International Journal of Computational Methods and Experimental Measurements 5(4), pp. 495 – 503, 2017. DOI: 10.2495/CMEM-V5-N4-495-503
- [2] Final drawing and instruction manual for steering gear R4ST 1000-35º (hull № Н2081), 2009.
- [3] Kolovsky, M. Z., Evgrafov, A. N., Semenov, Yu. A. et al. “Advanced theory of mechanisms and machines”, Berlin: Springer, 2000.
- [4] Mata, S. A., Torras, A.B., Cabrera, J.A. et al. “Fundamentals of Machine Theory and Mechanisms”, Cham: Springer, 2016.
- [5] Ozols, O. G. “Theory of Mechanisms and Machines”, Moscow: Nauka, 1984.
- [6] Protsenko, V., Babiy, M., Nastasenko, V., Protasov, R. “Marine diesel high pressure fuel pump driving failure analysis”, Strojnícky časopis – Journal of Mechanical Engineering, 71 (2), pp. 213 – 220, 2021. DOI: 10.2478/scjme-2021-0031
- [7] Protsenko, V.O., Nastasenko, V.O., Babiy, M.V., Bilikon, A.O. “Marine ram-type steering gear details load transfer features”, Shipping and Navigation, 30, pp. 107 – 116, 2020, DOI: 10.31653/2306-5761.30.2020.107-116
- [8] Protsenko, V.O., Babiy, M.V., Nastasenko, V.O., Bilikon, A.O. “Directions and reserves of ram-type steering gear with tangent-type mechanism technical level increasing”, Water transport, 3(31), pp. 101 – 114, 2020, DOI: 10.33298/2226-8553/2020.3.31.11
- [9] Reshetov, L. “Self-Aligning Mechanisms”, Moscow: Mir Publishers, 1986.
- [10] Segľa, S. “Static balancing of robot mechanisms and manipulation devices”, Strojnícky časopis – Journal of Mechanical Engineering 68 (2), pp. 77 – 90, 2018. DOI: 10.2478/scjme-2018-0019
- [11] Shala, A., Bruci, M. “Proposed robot scheme with 5 DOF and dynamic modelling using MAPLE software”, Strojnícky časopis – Journal of Mechanical Engineering, 67 (2), pp. 101 – 108, 2017. DOI: 10.1515/scjme-2017-0023
- [12] Voinea, R., Atanasiu, M. “Contributions a la Teorie geometrique des Vis”, Buletinul Institutului Politichnic Bucuresti 21 (3), pp. 69 – 90, 1959.
- [13] Zalyubovskii, M.G., Panasyuk, I.V. “On the Study of the Basic Design Parameters of a Seven-Link Spatial Mechanism of a Part Processing Machine”, Int. Appl. Mech., 56, pp. 54 – 64, 2020. DOI: 10.1007/s10778-020-00996-x
- [14] Zdanevich, S.S., Pogrebnyak, R.P., Zdanevich, S.V. “Structural analysis and rational design of mechanisms of cross-roll tube straightening machines”, Science and Transport Progress. Bulletin of Dnipropetrovs’k National University of Railway Transport, 5 (77), pp. 65 – 73, 2018. DOI: 10.15802/stp2018/147630