Marine Ram-Type Steering Gears Maintainability Increasing

Vladyslav Protsenko; Valentyn Nastasenko; Mykhaylo Babiy; Roman Protasov

doi:10.2478/scjme-2022-0025

.blurhash-client-img { display: none !important; }

Marine Ram-Type Steering Gears Maintainability Increasing

Strojnícky časopis - Journal of Mechanical Engineering

Volume 72 (2022): Issue 2 (November 2022)

By: Vladyslav Protsenko, Valentyn Nastasenko, Mykhaylo Babiy and Roman Protasov

Open Access

|Nov 2022

Abstract

The structure of steering gear’s HATLAPA mechanism is analyzed. It is shown that presence of redundant constraints in it increases laboriousness of gear montage and respectively worsen maintainability. On the basis of provided analysis developed mechanism with reduced more than twice redundant constrainsts number.

References

[1] Atarer, F., Korkmaz, K., Kiper, G. “Design alternatives of network of Altmann linkages”, International Journal of Computational Methods and Experimental Measurements 5(4), pp. 495 – 503, 2017. DOI: 10.2495/CMEM-V5-N4-495-503
Open DOI Search in Google Scholar Back to article
[2] Final drawing and instruction manual for steering gear R4ST 1000-35º (hull № Н2081), 2009.
Search in Google Scholar Back to article
[3] Kolovsky, M. Z., Evgrafov, A. N., Semenov, Yu. A. et al. “Advanced theory of mechanisms and machines”, Berlin: Springer, 2000.
Search in Google Scholar Back to article
[4] Mata, S. A., Torras, A.B., Cabrera, J.A. et al. “Fundamentals of Machine Theory and Mechanisms”, Cham: Springer, 2016.
Search in Google Scholar Back to article
[5] Ozols, O. G. “Theory of Mechanisms and Machines”, Moscow: Nauka, 1984.
Search in Google Scholar Back to article
[6] Protsenko, V., Babiy, M., Nastasenko, V., Protasov, R. “Marine diesel high pressure fuel pump driving failure analysis”, Strojnícky časopis – Journal of Mechanical Engineering, 71 (2), pp. 213 – 220, 2021. DOI: 10.2478/scjme-2021-0031
Open DOI Search in Google Scholar Back to article
[7] Protsenko, V.O., Nastasenko, V.O., Babiy, M.V., Bilikon, A.O. “Marine ram-type steering gear details load transfer features”, Shipping and Navigation, 30, pp. 107 – 116, 2020, DOI: 10.31653/2306-5761.30.2020.107-116
Open DOI Search in Google Scholar Back to article
[8] Protsenko, V.O., Babiy, M.V., Nastasenko, V.O., Bilikon, A.O. “Directions and reserves of ram-type steering gear with tangent-type mechanism technical level increasing”, Water transport, 3(31), pp. 101 – 114, 2020, DOI: 10.33298/2226-8553/2020.3.31.11
Open DOI Search in Google Scholar Back to article
[9] Reshetov, L. “Self-Aligning Mechanisms”, Moscow: Mir Publishers, 1986.
Search in Google Scholar Back to article
[10] Segľa, S. “Static balancing of robot mechanisms and manipulation devices”, Strojnícky časopis – Journal of Mechanical Engineering 68 (2), pp. 77 – 90, 2018. DOI: 10.2478/scjme-2018-0019
Open DOI Search in Google Scholar Back to article
[11] Shala, A., Bruci, M. “Proposed robot scheme with 5 DOF and dynamic modelling using MAPLE software”, Strojnícky časopis – Journal of Mechanical Engineering, 67 (2), pp. 101 – 108, 2017. DOI: 10.1515/scjme-2017-0023
Open DOI Search in Google Scholar Back to article
[12] Voinea, R., Atanasiu, M. “Contributions a la Teorie geometrique des Vis”, Buletinul Institutului Politichnic Bucuresti 21 (3), pp. 69 – 90, 1959.
Search in Google Scholar Back to article
[13] Zalyubovskii, M.G., Panasyuk, I.V. “On the Study of the Basic Design Parameters of a Seven-Link Spatial Mechanism of a Part Processing Machine”, Int. Appl. Mech., 56, pp. 54 – 64, 2020. DOI: 10.1007/s10778-020-00996-x
Open DOI Search in Google Scholar Back to article
[14] Zdanevich, S.S., Pogrebnyak, R.P., Zdanevich, S.V. “Structural analysis and rational design of mechanisms of cross-roll tube straightening machines”, Science and Transport Progress. Bulletin of Dnipropetrovs’k National University of Railway Transport, 5 (77), pp. 65 – 73, 2018. DOI: 10.15802/stp2018/147630
Open DOI Search in Google Scholar Back to article

Articles in this issue

DOI: https://doi.org/10.2478/scjme-2022-0025 | Journal eISSN: 2450-5471 | Journal ISSN: 0039-2472

Journal RSS Feed

Language: English

Page range: 149 - 160

Published on: Nov 7, 2022

Published by: Slovak University of Technology in Bratislava

In partnership with: Paradigm Publishing Services

Publication frequency: 2 issues per year

Keywords:

steering gear,

redundant constraints,

Related subjects:

Mechanical engineering,

Fundamentals of mechanical engineering,

Mechanics

© 2022 Vladyslav Protsenko, Valentyn Nastasenko, Mykhaylo Babiy, Roman Protasov, published by Slovak University of Technology in Bratislava
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

Volume 72 (2022): Issue 2 (November 2022)