Estimation of Material Properties of Carbon Nanotubes Using Finite Element Method

Bocko Jozef; Lengvarský Pavol; Pástor Miroslav

doi:10.2478/scjme-2019-0014

.blurhash-client-img { display: none !important; }

Estimation of Material Properties of Carbon Nanotubes Using Finite Element Method

Strojnícky časopis - Journal of Mechanical Engineering

Volume 69 (2019): Issue 2 (June 2019)

By: Bocko Jozef, Lengvarský Pavol and Pástor Miroslav

Open Access

|Jun 2019

Abstract

The paper deals with estimation of material properties of single-walled carbon nanotubes (SWCNTs). The SWCNTs are simulated as frames, where carbon atoms are replaced by nodes and interatomic interactions are replaced by beams. The tension and torsion loading is applied on SWCNTs for determining the elastic modulus, Poisson’s ratio, shear modulus and membrane stiffness of SWCNTs. The simulations for obtaining elongations and torsion angles of SWCNTs are accomplished by the finite element method.

References

[1] Bocko, J., Lengvarský, P., Šarloši, J. “Buckling Analysis of Hetero-Junction Carbon Nanotubes”, Strojnícky časopis – Journal of Mechanical Engineering 68 (2), pp. 9 – 16, 2018. DOI: https://doi.org/10.2478/scjme-2018-0013
Search in Google Scholar Back to article
[2] Cornwell, C. F., Wille, L. T. “Elastic properties of single-walled carbon nanotubes in compression”, Solid State Communications 101 (8), pp. 555 – 558, 1997. DOI: https://doi.org/10.1016/S0038-1098(96)00742-9
Search in Google Scholar Back to article
[3] Ghorbanpour Arani, A., Rahmani, R., Arefmanesh, A. “Elastic buckling analysis of single-walled carbon nanotube under combined loading by using the ANSYS software”, Physica E: Low-Dimensional Systems and Nanostructures 40 (7), pp. 2390 – 2395, 2008. DOI: https://doi.org/10.1016/j.physe.2007.11.011
Search in Google Scholar Back to article
[4] Giannopoulos, G. I., Kakavas, P. A., Anifantis, N. K. “Evaluation of the effective mechanical properties of single walled carbon nanotubes using a spring based finite element approach”, Computational Materials Science 41 (4), 561 – 569, 2008. DOI: https://doi.org/10.1016/j.commatsci.2007.05.016
Search in Google Scholar Back to article
[5] He, X. Q., Kitipornchai, S., Liew, K. M. “Buckling analysis of multi-walled carbon nanotubes: a continuum model accounting for van der Waals interaction”, Journal of the Mechanics and Physics of Solids 53 (2), pp. 303 – 326, 2005. DOI: https://doi.org/10.1016/j.jmps.2004.08.003
Search in Google Scholar Back to article
[6] Hernandez, E., Goze, C., Bernier, P., Rubio, A. “Elastic Properties of C and BxCyNz Composite Nanotubes”, Physical Review Letters 80 (20), pp. 4502 – 4505, 1998. DOI: https://doi.org/10.1103/PhysRevLett.80.4502
Search in Google Scholar Back to article
[7] Iijima, S. “Helical microtubules of graphitic carbon” Nature 354 (6348), pp. 56–58. 1991. DOI: https://doi.org/10.1038/354056a0
Search in Google Scholar Back to article
[8] Kudin, K. N., Scuseria, G. E., Yakobson, B. I. “C2F, BN, and C nanoshell elasticity from ab initio computations”, Physical Review B 64 (23), 235406, 2001. DOI: https://doi.org/10.1103/PhysRevB.64.235406
Search in Google Scholar Back to article
[9] Lalit, R., Mayank, P., Ankur, K. “Natural Fibers and Biopolymers Characterization: A Future Potential Composite Material”, Strojnícky časopis – Journal of Mechanical Engineering 68 (1), pp. 33 – 50, 2018. DOI: https://doi.org/10.2478/scjme-2018-0004
Search in Google Scholar Back to article
[10] Li, C., & Chou, T.-W. “A structural mechanics approach for the analysis of carbon nanotubes”, International Journal of Solids and Structures 40 (10), pp. 2487 – 2499, 2003. DOI: https://doi.org/10.1016/S0020-7683(03)00056-8
Search in Google Scholar Back to article
[11] Liew, K. M., Wong, C. H., He, X. Q., Tan, M. J., Meguid, S. A. “Nanomechanics of single and multiwalled carbon nanotubes”, Physical Review B 69 (11), 115429, 2004. DOI: https://doi.org/10.1103/PhysRevB.69.115429
Search in Google Scholar Back to article
[12] Lu, J. P. “Elastic properties of carbon nanotubes and nanoropes”, Physical Review Letters 79 (7), pp. 1297 – 1300, 1997. DOI: https://doi.org/10.1103/PhysRevLett.79.1297
Search in Google Scholar Back to article
[13] Majid, J., Mohammad Reza, M. “Investigation of Defect Effects on Adhesively Bonded Joint Strength Using Cohesive Zone Modeling”, Strojnícky časopis – Journal of Mechanical Engineering 68 (3), pp. 5 – 24, 2018. DOI: 10.2478/scjme-2018-0023
Search in Google Scholar Back to article
[14] Meo, M., Rossi, M. “Prediction of Young’s modulus of single wall carbon nanotubes by molecular-mechanics based finite element modelling”, Composites Science and Technology 66 (11), pp. 1597 – 1605, 2006. DOI: 10.1016/j.compscitech.2005.11.015
Search in Google Scholar Back to article
[15] Pantano, A., M. Parks, D., Boyce, M. C. “Mechanics of deformation of single- and multi-wall carbon nanotubes”, Journal of the Mechanics and Physics of Solids 52 (4), pp. 789 – 821. (2004). DOI: https://doi.org/10.1016/j.jmps.2003.08.004
Search in Google Scholar Back to article
[16] Papanikos, P., Nikolopoulos, D. D., & Tserpes, K. I. (2008). Equivalent beams for carbon nanotubes. Computational Materials Science, 43(2), 345–352. https://doi.org/10.1016/j.commatsci.2007.12.010
Search in Google Scholar Back to article
[17] Pleskachevsky, Y., Shimanovsky, A. Kuziomkina, H. “Finite-element modeling of the interaction of reinforcement with concrete matrix”, Mechanics of Composite Materials – 44 (3), pp. 209 – 214, 2008. DOI: https://doi.org/10.1007/s11029-008-9013-1.
Search in Google Scholar Back to article
[18] Sanchez-Portal, D., Artacho, E., Soler, J. M., Rubio, A., Ordejon, P. “Ab-initio structural, elastic, and vibrational properties of carbon nanotubes”, Physical Review B 59 (19), 12678–12688, 1999. DOI: https://doi.org/10.1103/PhysRevB.59.12678
Search in Google Scholar Back to article
[19] Sears, A., & Batra, R. C. (2006). Buckling of multiwalled carbon nanotubes under axial compression. Physical Review B, 73(8), 085410. https://doi.org/10.1103/PhysRevB.73.085410
Search in Google Scholar Back to article
[20] Tserpes, K. I., Papanikos, P. “Finite element modeling of single-walled carbon nanotubes”, Composites Part B: Engineering 36 (5), pp. 468–477. 2005. DOI: https://doi.org/10.1016/j.compositesb.2004.10.003
Search in Google Scholar Back to article
[21] Xin, Z., Jianjun, Z., Zhong-can, O.-Y. “Strain energy and Young’s modulus of single-wall carbon nanotubes calculated from electronic energy-band theory”, Physical Review B 62 (20), pp. 13692 – 13696, 2000. DOI: https://doi.org/10.1103/PhysRevB.62.13692
Search in Google Scholar Back to article
[22] Yakobson, B. I., Campbell, M. P., Brabec, C. J., Bernholc, J. “High strain rate fracture and C-chain unraveling in carbon nanotubes”, Computational Materials Science 8 (4), pp. 341–348, 1997. DOI: https://doi.org/10.1016/S0927-0256(97)00047-5
Search in Google Scholar Back to article
[23] Yao, X., Han, Q., Xin, H. “Bending buckling behaviors of single- and multi-walled carbon nanotubes”, Computational Materials Science 43 (4), pp. 579 – 590, 2008. DOI: https://doi.org/10.1016/j.commatsci.2007.12.019
Search in Google Scholar Back to article

Articles in this issue

DOI: https://doi.org/10.2478/scjme-2019-0014 | Journal eISSN: 2450-5471 | Journal ISSN: 0039-2472

Journal RSS Feed

Language: English

Page range: 7 - 14

Published on: Jun 28, 2019

Published by: Slovak University of Technology in Bratislava

In partnership with: Paradigm Publishing Services

Publication frequency: 2 issues per year

Keywords:

beam element,

carbon nanotube,

FEM,

material characteristics

Related subjects:

Engineering,

Mechanical engineering,

Fundamentals of mechanical engineering,

Mechanics

© 2019 Bocko Jozef, Lengvarský Pavol, Pástor Miroslav, published by Slovak University of Technology in Bratislava
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

Volume 69 (2019): Issue 2 (June 2019)