Properties of graphite-stainless steel composite in bipolar plates in simulated anode and cathode environments of PEM fuel cells
References
- [1] Kirubakaran A., Jain S., Nema R.K., Renewable and Sustainable Energy Rev., 13 (2009) 2430. http://dx.doi.org/10.1016/j.rser.2009.04.004
- [2] Cooper J.S., J. Power Sources, 129 (2004) 152. http://dx.doi.org/10.1016/j.jpowsour.2003.11.037
- [3] Larminie J., Dicks A., Fuel Cell Systems Explained, Wiley & Sons, Ltd., 2003. http://dx.doi.org/10.1002/9781118878330
- [4] Show Y., Surf. Coat. Technol., 202 (2007) 1252. http://dx.doi.org/10.1016/j.surfcoat.2007.07.065
- [5] Show Y., Miki M., Nakamura T., Diamond Relat. Mater., 16 (2007) 1159. http://dx.doi.org/10.1016/j.diamond.2006.11.068
- [6] Wang S.H., Peng J., Lui W.B., Zhang J.S., J. Power Sources, 162 (2006) 486. http://dx.doi.org/10.1016/j.jpowsour.2006.06.084
- [7] Paulauskas I.E., Brady M.P., Meyer III H.M., Buchanan R.A., Walker L.R., Corr. Sci., 48 (2006) 3157. http://dx.doi.org/10.1016/j.corsci.2005.10.019
- [8] El-Enim S.A.A., Abdel-Salam O.E., El-Abd H., Amin A.M., J. Power Sources, 177 (2008) 131. http://dx.doi.org/10.1016/j.jpowsour.2007.11.042
- [9] Nikam V.V., Reddy R.G., J. Power Sources, 152 (2005) 146. http://dx.doi.org/10.1016/j.jpowsour.2005.02.035
- [10] Nikam V.V., Reddy R.G., Electrochim. Acta, 51 (2006) 6338. http://dx.doi.org/10.1016/j.electacta.2006.04.019
- [11] Andre J., Antoni L., Petit J.-P., Int. J. Hydrogen Energy, 35 (2010) 3684. http://dx.doi.org/10.1016/j.ijhydene.2010.01.062
- [12] Kraytsberg A. Auinat M., Ein-Eli Y., J. Powers Sources, 164 (2007) 697. http://dx.doi.org/10.1016/j.jpowsour.2006.11.033
- [13] Hodgson D.R., May B., Adcock P.L., Davies D.P., J. Powers Sources, 96 (2001) 233. http://dx.doi.org/10.1016/S0378-7753(01)00568-7
- [14] Li M.C., Zeng C.L., Luo S.Z., Shen J.N., Lin H.C., Cao C.N., Electrochim. Acta, 48 (2003) 1735. http://dx.doi.org/10.1016/S0013-4686(03)00113-0
- [15] Geng S., Li Y., Ma Z., Wang L., Wang F., J. Powers Sources, 195 (2010) 2356.
- [16] Wang H., Sweikart M.A., Turner J.A., J. Power Sources, 115 (2003) 243. http://dx.doi.org/10.1016/S0378-7753(03)00023-5
- [17] Yoon W., Huang X., Fazzino P., Reifsnider K.L., Akkaoui M.A., J. Power Sources, 179 (2008) 265. http://dx.doi.org/10.1016/j.jpowsour.2007.12.034
- [18] Wang Y., Northwood D. O., Electrochim. Acta, 52 (2007) 6793. http://dx.doi.org/10.1016/j.electacta.2007.05.001
- [19] Wang Y., Northwood D. O., J. Power Sources, 163 (2006) 500. http://dx.doi.org/10.1016/j.jpowsour.2006.09.048
- [20] Fu Y., Lin G., Hou M., Wu B., Li H., Hao L., Shao Z., Yi B., Int. J. Hydrogen Energy, 34 (2009) 453. http://dx.doi.org/10.1016/j.ijhydene.2008.09.104
- [21] Larijani M.M., Yari M., Afshar A., Jafarian M., Eshghabadi M., J. Alloys and Compounds, 509 (2011) 7400. http://dx.doi.org/10.1016/j.jallcom.2011.04.044
- [22] Hung Y., El-Khatib K.M., Tawfik H., J. Applied Electrochemistry, 35 (2005) 445. http://dx.doi.org/10.1007/s10800-004-8350-6
- [23] Yan X., Hou M., Zhang H., Jing F., Ming P., Yi B., J. Power Sources, 160 (2006) 252. http://dx.doi.org/10.1016/j.jpowsour.2006.01.022
- [24] Nam D.-G., Lee H.-C., J. Power Sources, 170 (2007) 268. http://dx.doi.org/10.1016/j.jpowsour.2007.04.054
- [25] M. Wissler, J. Power Sources, 156 (2006) 142. http://dx.doi.org/10.1016/j.jpowsour.2006.02.064
- [26] Chung C.-Y., Chen S.-K., Chin T.-S., Ko T.-H., Lin S.-W., Chang W.-M., Hsiao S.-N., J. Power Sources, 186 (2009) 393. http://dx.doi.org/10.1016/j.jpowsour.2008.10.047
- [27] Zhu J., Wang X., Guo L., Wang Y., Wang Y., Yu M., Lau K., Carbon, 5 (2007) 2547. http://dx.doi.org/10.1016/j.carbon.2007.08.019
- [28] Larijani M. M., Yari M., Afshar A., Jafarian M., Eshghabadi M., J. Alloys and Compounds, 509 (2011) 7400. http://dx.doi.org/10.1016/j.jallcom.2011.04.044
- [29] Fukutsuka T., Yamaguchi T., Miyano S.-I., Matsuo Y., Sugie Y., Ogumi., J. Power Sources, 174 (2007) 199. http://dx.doi.org/10.1016/j.jpowsour.2007.08.096
- [30] Wind J., Spah R., Kaiser W., Bohm G., J. Power Sources, 105 (2002) 256. http://dx.doi.org/10.1016/S0378-7753(01)00950-8
- [31] Kakati B.K., Yamsani V.K., Dhathathreyan K.S., Sathiyamoorthy D., Verma A., Carbon, 47 (2009), 2413. http://dx.doi.org/10.1016/j.carbon.2009.04.034
- [32] Fu Y., Lin G., Hou M., Wu B., Shao Z., Yi B., Int. J. Hydrogen Energy, 34 (2009) 405. http://dx.doi.org/10.1016/j.ijhydene.2008.10.068
- [33] Dhakate S.R., Mathur R.B., Kakati B.K., Dhami T.L., Int. J. Hydrogen Energy, 32 (2007), 4537. http://dx.doi.org/10.1016/j.ijhydene.2007.02.017
- [34] Yuan W., Tang Y., Yang X., Wan Z., Applied Energy, 94 (2012) 309. http://dx.doi.org/10.1016/j.apenergy.2012.01.073
- [35] Zhang L., Liu Y., Song H., Wang S., Zhou Y., Hu S.J., J. Power Sources, 162 (2006) 1165. http://dx.doi.org/10.1016/j.jpowsour.2006.07.070
- [36] Wlodarczyk R., Materials Science Forum, 706–709 (2012), 1047. http://dx.doi.org/10.4028/www.scientific.net/MSF.706-709.1047
- [37] Włodarczyk R., Dudek A., Kobyłecki R., Bis Z., Corrosion Resistance, Chapter 9: Corrosion resistance of composites based to graphite used as bipolar plates in fuel cells, H. Shih — INTECH, Croatia, 2012, p. 189.
- [38] Lee S.-J., Huang C.-H., Lai J.-J., Chen Y.-P., J. Power Sources, 131 (2004) 162. http://dx.doi.org/10.1016/j.jpowsour.2004.01.008
- [39] Włodarczyk R., Wrońska A., Arch. Metall. and Mater., 2013, doi:10.2478/v10172-012-0156-7.
- [40] Włodarczyk R., Dudek A., Nitkiewicz Z., Arch. Metall. and Mater., 56(1), 2011, 182.
- [41] Włodarczyk R., Kacprzak A., Kobyłecki R., Bis Z., Functional Materials Letters, DOI: 10.1142/S1793604713500239.
- [42] Włodarczyk R., in press in Arch. Metall. and Mater.
- [43] www.iupac.org, website, 2013.
- [44] Lee H.-K., Park J.-H., Kim D.-Y., Lee T.-H., J. Power Sources, 131 (2004) 200. http://dx.doi.org/10.1016/j.jpowsour.2003.12.039
- [45] Gostick J. T., Fowler M. W., Ioannidis M. A., Pritzker M. D., Volfkovich Y.M., Sakars A., J. Power Sources, 156, (2006) 375. http://dx.doi.org/10.1016/j.jpowsour.2005.05.086
- [46] Molin S., Gazda M., Jasinski P., Solid State Ionics, 181 (2010) 1214. http://dx.doi.org/10.1016/j.ssi.2010.06.049
- [47] Kim D.-K., Lee D.-G., Lee S., Metallurgical and Materials Transactions 32A, (2001) 1111. http://dx.doi.org/10.1007/s11661-001-0122-x
- [48] Hakiki N.E., J. Applied Electrochemistry, 40 (2010) 357. http://dx.doi.org/10.1007/s10800-009-0004-2
- [49] Kraytsberg A., Auinat M., Ein-Eli. , J. Power Sources, 164 (2007) 697. http://dx.doi.org/10.1016/j.jpowsour.2006.11.033
- [50] Barber M., Sun T.S., Petrach E., Wang X., Zou Q., J. Power Sources, 185 (2008) 1252. http://dx.doi.org/10.1016/j.jpowsour.2008.08.091
- [51] Cunningham B.D., Baird D.G., J. Power Sources, 168 (2007) 418. http://dx.doi.org/10.1016/j.jpowsour.2007.03.036
- [52] Włodarczyk R., Dudek A., Steel Research International, 81(9), 2010, 1288.
DOI: https://doi.org/10.2478/s13536-014-0229-6 | Journal eISSN: 2083-134X (formerly 2083-124X) | Journal ISSN: 2083-1331
Language: English
Page range: 487 - 497
Published on: Oct 17, 2014
Published by: Wroclaw University of Science and Technology
In partnership with: Paradigm Publishing Services
Keywords:
Related subjects:
© 2014 Renata Włodarczyk, published by Wroclaw University of Science and Technology
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.