Using glass wastes and bentonite to produce a new ceramic tile
References
- Fernandes, H.R., Tulyaganov, D.U., Ferreira, J.M.F. (2009): Preparation and characterization of foams from sheet glass and fly ash using carbonates as foaming agents. Ceramics International, 35(1), pp. 229–235.
https://doi.org/10.1016/j.ceramint.2007.10.019 - Adhikary, S.K., Ashish, D.K., Rudžionis, Ž. (2021): Expanded glass as light-weight aggregate in concrete–a review. Journal of Cleaner Production, 313, pp. 127848.
https://doi.org/10.1016/j.jclepro.2021.127848 - Adediran, A., Lemougna, P.N., Yliniemi, J., Tanskanen, P., Kinnunen, P., Roning, J., Illikainen, M. (2021): Recycling glass wool as a fluxing agent in the production of clay-and waste-based ceramics. Journal of Cleaner Production, 289, pp. 125673.
https://doi.org/10.1016/j.jclepro.2020.125673 - El-Shimy, Y.N., Amin, S.K., El-Sherbiny, S.A., Abadir, M.F. (2014): The use of cullet in the manufacture of vitrified clay pipes. Construction and Building Materials, 73, pp. 452–457.
https://doi.org/10.1016/j.conbuildmat.2014.09.090 - Demir, I. (2009): Reuse of waste glass in building brick production. Waste management & research, 27(6), pp. 572–577.
https://doi.org/10.1177/0734242X0809652 - Benaouina, C., Kadri, T., Khelafi, H., Benkhelifa, M. (2008): Optimization of Physical and Mechanical Properties of Local Baked Clay Brick of Ain Nouissy Deposit (North-West of Algeria). Journal of Applied Sciences, 8(23), pp. 4450–4454. Doi: 10.3923/jas.2008.4450.4454
- Sahar, M.R., Razi, M.M. (2011): Cullet-Clay Brick from Recycle Glass. Journal of Materials Science and Engineering, 5(3), pp. 293.
- Rambaldi, E., Carty, W.M., Tucci, A., Esposito, L. (2007): Using waste glass as a partial flux substitution and pyroplastic deformation of a porcelain stoneware tile body. Ceramics International, 33(5), pp. 727–733.
https://doi.org/10.1016/j.ceramint.2005.12.010 - Razi, M.M., Sahar, M.R., Md Yusuf, M.N. (2011): Physical Properties of Cullet Clay Ceramic. In: AIP Conference Proceedings (Vol. 1328, No. 1, pp. 299–301). American Institute of Physics.
https://doi.org/10.1063/1.3573759 - Loryuenyong, V., Panyachai, T., Kaewsimork, K., Siritai, C. (2009): Effects of recycled glass substitution on the physical and mechanical properties of clay bricks. Waste Management, 29(10), pp. 2717–2721.
https://doi.org/10.1016/j.wasman.2009.05.015 - Saidi, M., Safi, B., Benmounah, A., Megdoud, N., Radi, F. (2016): Physico-mechanical properties and thermal behavior of firebrick-based mortars in superplasticizer presence. Construction and Building Materials, 104, pp. 311–321.
https://doi.org/10.1016/j.conbuildmat.2015.12.026 - Shi, C., Zheng, K. (2007): A review on the use of waste glasses in the production of cement and concrete. Resources, conservation and recycling, 52(2), pp. 234–247.
https://doi.org/10.1016/j.resconrec.2007.01.013 - Velasco, P.M., Ortíz, M.M., Giró, M.M., Velasco, L.M. (2014): Fired clay bricks manufactured by adding wastes as sustainable construction material–A review. Construction and Building materials, 63, pp. 97–107.
https://doi.org/10.1016/j.conbuildmat.2014.03.045 - Bories, C., Borredon, M.E., Vedrenne, E., Vilarem, G. (2014): Development of eco-friendly porous fired clay bricks using pore-forming agents: A review. Journal of environmental management, 143, pp. 186–196.
https://doi.org/10.1016/j.jenvman.2014.05.006 - Zanelli, C., Conte, S., Molinari, C., Soldati, R., Dondi, M. (2021): Waste recycling in ceramic tiles: A technological outlook. Resources, Conservation and Recycling, 168, pp. 105289.
https://doi.org/10.1016/j.resconrec.2020.105289 - Aboutaleb, D., Safi, B. (2016): Structure and Properties of the Soda-Borate Glasses: Effect of Adding Fe2O3 Concentration. Journal of Chemical Engineering & Process Technology, 7(1). pp. 1–4. doi:10.4172/2157-7048.1000268
- Blengini, G.A., Busto, M., Fantoni, M., Fino, D. (2012): Eco-efficient waste glass recycling: Integrated waste management and green product development through LCA. Waste management, 32(5), pp. 1000–1008.
https://doi.org/10.1016/j.wasman.2011.10.018 - Lemougna, P. N., Yliniemi, J., Adediran, A., Luukkonen, T., Tanskanen, P., Finnilä, M., & Illikainen, M. (2021): Synthesis and characterization of porous ceramics from spodumene tailings and waste glass wool. Ceramics International, 47(23), 33286–33297.
https://doi.org/10.1016/j.ceramint.2021.08.231 - Njindam, O.R., Njoya, D., Mache, J.R., Mouafon, M., Messan, A., Njopwouo, D. (2018): Effect of glass powder on the technological properties and microstructure of clay mixture for porcelain stoneware tiles manufacture. Construction and Building Materials, 170, pp. 512–519.
https://doi.org/10.1016/j.conbuildmat.2018.03.069 - Darweesh, H.H.M. (2019): Recycling of glass waste in ceramics—Part I: Physical, mechanical and thermal properties. SN Applied Sciences, 1, pp. 1–11.
https://doi.org/10.1007/s42452-019-1304-8 - ASTM C373-88 (2005): Standard Test Method for Water Absorption, Bulk Density, Apparent Porosity, and Apparent Specific Gravity of Fired Whiteware Products. Annual Book of ASTM Standards, ASTM, West Conshohocken, PA.
- ASTM C356-03 (2000): Standard Test Method for Linear Shrinkage of Preformed High-Temperature Thermal Insulation Subjected to Soaking Heat. Annual Book of ASTM Standards, ASTM, West Conshohocken, PA.
- ASTM C773-88 (2005): Standard Test Method for Compressive (Crushing) Strength of Fired Whiteware Materials. Annual Book of ASTM Standards, ASTM, West Conshohocken, PA.
- ASTM C1684-08 (2009): Standard Test Method for Flexural Strength of Advanced Ceramics at Ambient Temperature-Cylindrical Rod Strength. Annual Book of ASTM Standards, ASTM, West Conshohocken, PA.
- Ogawa, Y., Bui, P.T., Kawai, K., Sato, R. (2020): Effects of porous ceramic roof tile waste aggregate on strength development and carbonation resistance of steam-cured fly ash concrete. Construction and Building Materials, 236, pp. 117462.
https://doi.org/10.1016/j.conbuildmat.2019.117462 - Cultrone, G., Sebastián, E., Elert, K., De la Torre, M.J., Cazalla, O., Rodriguez–Navarro, C. (2004): Influence of mineralogy and firing temperature on the porosity of bricks. Journal of the European Ceramic Society, 24(3), pp. 547–564.
https://doi.org/10.1016/S0955-2219(03)00249-8 - Lozano, M.A.G., Peña, P.P. (2012): Uso de vidrio de desechoen la fabricación de ladrillos de arcilla/Use of waste glass in the manufacture of clay bricks. CIBA Revista Iberoamericana de las Ciencias Biológicas y Agropecuarias, 1(2), pp. 43–56.
- Siddique, R., Klaus, J. (2009): Influence of metakaolin on the properties of mortar and concrete: A review. Applied Clay Science, 43(3–4), pp. 392–400.
https://doi.org/10.1016/j.clay.2008.11.007 - Shishkin, A., Baronins, J., Mironovs, V., Lukáč, F., Štubňa, I., Ozolins, J. (2020): Influence of glass additions on illitic clay ceramics. Materials, 13(3), pp. 596.
https://doi.org/10.3390/ma13030596 - Darweesh, H.H.M. (2021): Gradual glass waste replacement at the expense of feldspar in Ceramic tiles. Journal of Building Pathology and Rehabilitation, 6(1), pp. 30.
https://doi.org/10.1007/s41024-021-00123-4
DOI: https://doi.org/10.2478/rmzmag-2023-0005 | Journal eISSN: 1854-7400
Language: English, Slovenian
Submitted on: Feb 5, 2023
Accepted on: Apr 6, 2023
Published on: Oct 7, 2023
Published by: Sciendo
In partnership with: Paradigm Publishing Services
Publication frequency: 4 issues per year
Related subjects:
© 2023 Farid Lachibi, Djamila Aboutaleb, Oussama Zaidi, Brahim Safi, published by Sciendo
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.