References
- *** https://car-recalls.eu/car-recalls-full-year-2024-mercedes-bmw-ford-top/, accessed on 20.02.2025
- A. BURLACU, T. SIMION: “Study on High Modulus Asphalt Mixtures, Romanian journal of transport infrastructure”, Volume13, Issue1, Page28-28, 2024.
- A.F. BURLACU, A. BURLACU, P. HORAȚIU: “Road Safety for All Road Users - Current Situation and Perspectives for 2030”, Romanian journal of transport infrastructure, Volume12, Issue2, Page18-18, 2023.
- *** https://globalrecalls.oecd.org/#/?endDate=2025-12-31&gs1-gpc-segment=77000000&startDate=2010-01-01 accessed on 20.02.2025
- *** https://globalrecalls.oecd.org/#/?endDate=2025-12-31&gs1-gpc-segment=77000000&searchTerm=chassis&startDate=2010-01-01 accessed on 18.03.2025.
- *** https://globalrecalls.oecd.org/#/?endDate=2025-12-31&gs1-gpc-segment=77000000&searchTerm=weld&startDate=2010-01-01 accessed on 18.03.2025
- A. SEGISMUNDO, A.C.P. MIGUEL: “Failure mode and effects analysis (FMEA) in the context of risk management in new product development: A case study in an automotive company”, International Journal of Quality & Reliability Management, Volume 25, Issue 9, pp. 899 – 912, 2008.
- F. SUMASTO, T.A. NUGROHO, E.S. SOLIH, A.w. AROHMAN, D. AGUSTIN, A.K. Permana: “Enhancing Quality Control in the Indonesian Automotive Parts Industry: A Defect Reduction Approach Through the Integration of FMEA and MSA”, Instrumentation Mesure Métrologie, 23 (1). pp. 43-53, 2024.
- M. TOLONTAN, C. ORHEI, R. VASIU: “Overview of the Technical Risk Analysis and Risk Assessment Analysis in Automotive Industry”, International Symposium on Electronics and Telecommunications (ISETC), Timisoara, Romania, pp. 1-4, 2024.
- K. MUHAMMAD: “Analysis of Product Defects in Stay Horn Parts during the Welding Process Using Fault Tree Analysis (FTA) and Failure Mode and Effects Analysis (FMEA)”, International Journal of Scientific and Applied Research (IJSAR), EISSN: 2583-0279, 4(5), 1–7. 2024.
- Guidelines for Failure Mode and Effects Analysis for Automotive, Aerospace and General Manufacturing Industries, CRC Press Dyadem Press, eBook ISBN9780429214523, 2003
- *** https://www.mindonmap.com/ro/blog/fmeca-analysis/ accessed on 18.03.2025
- K. D. SHARMA, S. SRIVASTAVA: “Failure Mode and Effect Analysis (FMEA) Implementation: A Literature Review”, Journal of Advance Research in Aeronautics and Space Science, Journal of Advance Research in Aeronautics and Space Science Volume 5, Issue 1&2 - 2018, Pg. No. 1-17 Peer Reviewed Journal, 2018.
- L. PETRESCU, E. CAZACU, M. C. PETRESCU: “Failure mode and effect analysis in automotive industry: a case study”, Scientific Bulletin of the Electrical Engineering Faculty – Year 19 No.2 (41), 2019.
- R.E. McDERMOTT, R.J. MIKULAK, M.R. BEAUREGARD: “The Basics of FMEA, 2nd Edition”, ISBN 978-1-5632-737-3, Taylor&Francis Group, USA, 2009.
- D.H. STAMATIS, “Failure mode and effect analysis: FMEA from theory to execution”, American Society for Quality, Quality Press, USA, 2003.
- “Failure Mode and Effects Analysis. In FMEA Handbook, 1st ed.”, AIAG & VDA: Southfield, MI, USA, 2019.
- D.-I. DUMITRASCU, A.-E. DUMITRASCU: “Failure Modes and Effects Analysis for Automotive Trim Parts Processing”, Engineering Proceedings, 76(1), 22. 2024.
- “Guidelines for Failure Mode and Effects Analysis for Automotive, Aerospace and General Manufacturing Industries” Dyadem, Press ISBN 0849319080, available at http://ndl.ethernet.edu.et/bitstream/123456789/24877/1/282.pdf
- Z. WU, W. LIU, W. NIE: “Literature review and prospect of the development and application of FMEA in manufacturing industry”. Int J Adv Manuf Technol 112, 1409–1436, 2021.
- B. DERBISZEWSKI, A. OBRANIAK, A. RYLSKI, K. SICZEK, M. WOZNIAK: “Studies on the Quality of Joints and Phenomena Therein for Welded Automotive Components Made of Aluminum Alloy—A Review”. Coatings, 14, 601. 2024.
- A. E. SALAS REYES, G. Á. LARA RODRIGUEZ, J. R. GONZÁLEZ PARRA, V. H. MERCADO LEMUS: Microstructural Characterization and Corrosion Behavior of Similar and Dissimilar Welded Advanced High-Strength Steels (AHSS) by Rotary Friction Welding”, Materials, 17(4), 2024.
- M.N.COMAN, Corneliu RONTESCU, D.T.CICIC, A.M. BOGATU, V. PIRVU: “Implementation of robot welding in the context of industry 4.0 development”, International Journal of Modern Manufacturing Technologies, Vol. XV, No. 1, 2023.