References
- P. Hajikarimi, M. Rahi, F. Moghadas Nejad,. Comparing different rutting specifcation parameters using high temperature characteristics of rubber-modifed asphalt binders, Road Mater. Pavement Des., Oct. 16 (4) (2015) 751–766.
- A. Behnood, J. Olek,. Rheological properties of asphalt binders modified with styrenebutadiene-styrene (SBS), ground tire rubber (GTR), or polyphosphoric acid (PPA), Constr. Build. Mater. 151 464–478. 2017.
- A.T. Visser, G.S. Duhovny, A.V. Sachkova . Comparison of bitumen–rubber use in extreme conditions in Russia and South Africa, Road Mater. Pavement Des. 18 (5) 1190–1199. 2017
- Pouya Teymourpour, Andrew J. Hanz, Tirupan Mandal, Hussain U. Bahia and Shawn J. Rizzutt, . Effect of Parallel Plate Gap Height on Repeatability in DSR Measurements of Crumb-Rubber Modified Binders, ASCE 0899-1561 J. Mater. Civ. Eng. 2016
- Xiaolong Sun, Yikang Zhang, Qinyuan Peng, Junshen Yuan, Zhi Cang and Jianbing Lv, . Study on adaptability of rheological index of nano-PUA-modified asphalt based on geometric parameters of parallel plate, Nanotechnology Reviews, 2021
- Liu Q, Wu J, Qu X, Wang C, Oeser M,. Investigation of bitumen rheological properties measured at different rheometer gap sizes. Constr Build Mater. 2020;265:120287.10.1016/j.conbuildmat.2020.120287.
- Meng YJ, Chi FX, Zhang XN. (2007). Ascertaining temperature applying range for different parallel plates in dynamic shear rheometer based on WLF equation. Highway. (5):149–53 (in Chinese). 2007.
- AASHTO. “Standard method of test for determining the rheological properties of asphalt binder using a dynamic shear rheometer (DSR).” AASHTO T315, Washington, DC. 2009
- AASHTO. “Standard method of test for multiple stress creep recovery (MSCR) test of asphalt binder using a dynamic shear rheometer (DSR).” AASHTO TP70, Washington, DC.2009
- AASHTO. “Standard specification for performance-graded asphalt binder.” AASHTO M320, Washington, DC. 2010
- AASHTO. “Standard specification for performance-graded asphalt binder using multiple stress creep recovery (MSCR) test.” AASHTO MP19, Washington, DC. 2010
- Bahia, H., and Davies, R . “Factors controlling the effects of crumb rubber on critical properties of asphalt binders.” J. Assoc. Asphalt Paving Technol., 64, 131–143.1995.
- Bahia, H., Zhai, H., Zeng, M., Hu, Y., and Turner, P.. “Development of binder specification parameters based on characterization of damage behavior.” Asphalt Paving Technol., 70, 442–470. 2001
- Bahia, H. U., and Anderson, D. A. . “Strategic Highway Research Program binder rheological parameters: Background and comparison with conventional properties.” Transp. Res. Rec., 1488, 32–39.1995.
- Baumgardner, G., and D’Angelo, J. A. . “Development of a crumb rubber modified (CRM) PG binder specification.” Asphalt Rubber Int. Conf., Consulpav-Consultores E Projectistas De Pavimentos, LDA, Portugal, 22–29. 2012.
- Bennert, T. “Grade determination of crumb rubber-modified performance graded asphalt binder.” No. C-08-20, Center for Advanced Infrastructure and Transportation, Rutgers Univ., Piscataway, NJ. 2013.
- Bennert, T., Dongre, R., Ericson, C., and Zavery, Z. “High temperature characterization of crumb-rubber-modified asphalt binders and mixtures in New York State.” Transportation Research Board 94th Annual Meeting, Transportation Research Board, Washington, DC, 19.2015.
- BJ Putman. “Qualification of the effects of crumb rubber in CRM binder.” Clemson, Northwestern South Carolina: Clemson University.2005.
- Vinay Hosahally Nanjegowda, Krishna Prapoorna Biligiri. ‘Recyclability of rubber in asphalt roadway systems: A review of applied research and advancement in technology’ Resources, Conservation & Recycling Journal, 155 (2020).
- Boudnani, Zeine E.; Glaoui, Bachir; Merbouh, M’hamed; Soussa, Jorge B, . Reacted and Activated Rubber effect on Stiffness Modulus and Cracking Resistance of Bituminous Mixtures. Romanian Journal of Civil Engineering.2021.