References
- G.P. Cimellaro, M. Tanganelli, M. Domaneschi, S. Viti: “Developing a laboratory facility to assess friction coefficients of standing samples,” Procedia Structural Integrity, vol. 29, 2020, pp. 142-148.
- Mocanu, S., Rece, L., Burlacu, A., Florescu, V., Rontescu, C., Modrea, A., “Novel Procedures for Sustainable Design in Structural Rehabilitation on Oversized Metal Structures”, Metals, Volume12, Issue7, Article Number1107, 2022, DOI: 10.3390/met12071107
- L. Căpitanu, V. Florescu, L.-L Bădiță: “Damage estimator, a possible way to predict the failure of hip and knee endoprosthesis,” Industrial Lubrication and Tribology, vol. 69(1), 2017, pp. 71-80.
- M. Gingarasu, E. Mereuta, V. Amortila, C. Humelnicu, M. Novetschi: “Wear of spherical joints of the vehicle steering Systems. Vibrations and their role in diagnosis,” Mechanical Testing and diagnosis, vol. 10, no. 3, 2020, pp. 16-20.
- V. Recklin, F. Dietrich, P. Groche: “Influence of Test Stand and Contact Size Sensitivity on the Friction Coefficient in Sheet Metal Forming,” Lubricants, vol .6, issue 2, 2018, 41.
- J.C. Pais, A. Ferreira, C. Santos, D. Presti: “Preliminary Studies to Use Textile Fibers Obtained from Recycled Tires to Reinforce Asphalt Mixtures,” Romanian Journal of Transport Infrastructure, vol. 7, issue 2, 2018, pp. 14-30.
- A. Legendi, L. Rece, A.D.B. Pironea, V. Florescu: “Innovative Calculation Method of the Productivity of Vibrating Screens Used in Mineral Aggregates Sorting,” Romanian Journal of Transport Infrastructure, vol. 7, issue 2, 2018, pp. 1-13.
- L. Căpitanu, Badita, L.-L., C. Tiganesteanu, V. Florescu: “The wear of the taper junction of the stem trunnion with the femoral head of a total modular hip prosthesis,” Journal Tribologi, vol. 23, 2019, pp. 61-75.
- L. Capitanu, L.-L. Badita, V. Florescu, C. Tiganesteanu, L.F. Isvoranu: “Fretting manifestations in total hip prosthesis,” IOP Conference Series: Materials Science and Engineering, vol. 724(1), 2020, 012057.
- L. Capitanu, L.-L. Badita, V. Florescu: “Stability loss of the cemented stem of hip prosthesis due to fretting corrosion fatigue,” Tribology in Industry, vol. 39, issue 4, 2017, pp. 536-546.
- L. Capitanu, V. Florescu, L.-L. Badita: “New concept in durability improvement of hip total joint endoprostheses,” Acta of Bioengineering and Biomechanics, vol. 16, issue 1, 2014, pp. 75-82
- Rontescu, C., Amza, C.G., Bogatu, A.M., Cicic, D.T., Anania, F.D., Burlacu, A., “Reconditioning by Welding of Prosthesis Obtained through Additive Manufacturing”, Metals, Volume 12, Issue 7, Article Number 1177, 2022, DOI: 10.3390/met12071177