About Failure of the LPG Tank Fastening Welds on the Chassis of Trucks

Virgil Florescu; Marius Nedelcu; Dragoș-Bogdan Vida; Ștefan Mocanu

doi:10.2478/rjti-2024-0004

.blurhash-client-img { display: none !important; }

About Failure of the LPG Tank Fastening Welds on the Chassis of Trucks

Romanian Journal of Transport Infrastructure

Volume 13 (2024): Issue 1 (July 2024)

By: Virgil Florescu, Marius Nedelcu, Dragoș-Bogdan Vida and Ștefan Mocanu

Open Access

|Aug 2024

Abstract

The international road transport of dangerous goods is subject to strict regulations. Traffic realities and experiences accumulated as a result of periodic inspections of specific equipment (tanks) lead to their constant updating and improvement. This article is focused to a study related to the appearance over time of some cracks in the welded joints between the tank and the mounting supports on the truck chassis.

References

Natiunile Unite, pentru Europa fiind emis de Comisia Economica a Natiunilot Unite pentru Europa – Comitetul pentru transportuiri interioare, ADR - ACORD referitor la transportul rutier international al marfurilor periculoase, editia aplicabila de la 1 ianuarie 2023
Search in Google Scholar Back to article
V. Florescu, L. Rece, S. Mocanu, A. Legendi, Comparative Study on the Applicability of Analytical and Experimental Methods in the Analysis of the Safe Use of Rail Tankers Carrying Petroleum Products Under Pressure, Romanian Journal of Transport Infrastructure, vol 7, Issue 1, 2018
Search in Google Scholar Back to article
V. Florescu, S. Mocanu, L. Rece, R. Ursache N. Goga, CV. Marian, Use of a Novel Resistive Strain Sensor Approach in an Experimental and Theoretical Study Concerning Large Spherical Storage Tank Structure Behavior During Its Operational Life and Pressure Tests, SENSORS, Volume 20, Issue 2, Article Number 525, (2020)
Search in Google Scholar Back to article
Sylvester Agbo, Meng Lin, Iman Ameli, Ali Imanpour, Da-Ming Duan, J.J. Roger Cheng, Samer Adeeb, Experimental evaluation of the effect of the internal pressure and flaw size on the tensile strain capacity of welded X42 vintage pipelines, International Journal of Pressure Vessels and Piping, Volume 173, June 2019, Pages 55-6, (2019)
Search in Google Scholar Back to article
J. Rosa, J. Cagan, Jk. Rosler “Strain gauge measurement on small propeller using special in-house developed hardware”, Materialstoday Proceedings, Volume 4, Issue 5, Part 1, 2017, pp. 5931-5934, doi.org/10.1016/j.matpr.2017.06.072
Search in Google Scholar Back to article
Y.-Y. Wang, D. Horsley, S. Rapp, Evolution of linepipe manufacturing and its implications on weld properties and pipeline service, Proceedings of the International Pipeline Conference 2016, Calgary, Alberta, Canada, September 26-30, 2016 (2016)
Search in Google Scholar Back to article
J. Ed Akin “Finite Element Analysis Concepts via SolidWorks”, Rice University, Houston, Texas, (2009)
Search in Google Scholar Back to article
Y.Y. Wang, W. Cheng, M. McLamb, D. Horsley, J. Zhou, A.G. Glover “Tensile strain limits of girth welds with surface-breaking defects Part II – experimental correlation and validation, Proceedings of the 4th International Conference on Pipeline Technology, pp. 251-266, Ostend, Belgium (2004)
Search in Google Scholar Back to article
EN 13445-5 : Unfired pressure vessels - Part 5: Inspection and testing
Search in Google Scholar Back to article
ASTM E8/E8M-11Standard Test Methods for Tension Testing of Metallic Materials, American Society of Testing and Materials, West Conshohocken, PA (2011)
Search in Google Scholar Back to article
Rontescu, C., Amza, C.G., Bogatu, A.M., Cicic, D.T., Anania, F.D., Burlacu, A., “Reconditioning by Welding of Prosthesis Obtained through Additive Manufacturing”, Metals, Volume 12, Issue 7, Article Number 1177, 2022, DOI: 10.3390/met12071177
Search in Google Scholar Back to article
*** SolidWorks User Manual
Search in Google Scholar Back to article

Articles in this issue

DOI: https://doi.org/10.2478/rjti-2024-0004 | Journal eISSN: 2286-2218

Journal RSS Feed

Language: English

Page range: 1 - 14

Published on: Aug 9, 2024

Published by: Technical University of Civil Engineering of Bucharest

In partnership with: Paradigm Publishing Services

Publication frequency: 2 issues per year

Keywords:

truck tank,

welded joints,

Finite Element Analysis

Related subjects:

Business and economics,

Business management,

Industries,

Environmental management,

Engineering,

Introductions and overviews,

Engineering, other,

Materials sciences,

Materials sciences, other

© 2024 Virgil Florescu, Marius Nedelcu, Dragoș-Bogdan Vida, Ștefan Mocanu, published by Technical University of Civil Engineering of Bucharest
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

Volume 13 (2024): Issue 1 (July 2024)