Rail Joint Model Based on the Euler-Bernoulli Beam Theory

References

[1]. 314 Instruction, Rules and tolerances for track construction and maintenance, 1989.
Search in Google Scholar Back to article
[2]. T. MAZILU, M. DUMITRIU, C. TUDORACHE, M. SEBEŞAN: “Wheel-rail joint geometry”, Proceedings of 4th International Workshop on Soft Computing Applications, pp. 259-263, 2010.10.1109/SOFA.2010.5565585
Search in Google Scholar Back to article
[3]. W. CAI, Z. WEN, X. JIN, W. ZHAI: “Dynamic stress analysis of rail joint with height difference defect usig finite element method”, Engineering Failure Analysis, Vol. 14, pp. 1488-1499, 2007.
Search in Google Scholar Back to article
[4]. Y. C. CHEN, L.W. CHEN: “Effects of insulated rail joint on the wheel/rail contact stresses under the condition of partial slip”, Wear, Vol. 260, pp. 1267-1273, 2006.
Search in Google Scholar Back to article
[5]. T. X. WU, D.J. THOMPSON: “On the impact noise generation due to a wheel passing over rail joints”, Journal of Sound and Vibration, Vol. 267, pp. 485-496, 2003.10.1016/S0022-460X(03)00709-0
Search in Google Scholar Back to article
[6]. M. OREGUI: “Vertical Railway Track Dynamics: from Measurements to Numerical Modelling”, Doctoral thesis, TU Delft, 2015.
Search in Google Scholar Back to article
[7]. T. MAZILU, M. C. LEU, “On the Modelling of Rail Joint”, Materials Science Forum, Vol. 957, pp. 33-42, 2019.10.4028/www.scientific.net/MSF.957.33
Search in Google Scholar Back to article