References
- Buss KRP, Vieira RDAM, De Oliveira D, Pereira IC, Ziberov M. Effects of friction additive manufacturing on the mechanical properties of parts: A literature review. Weld Insp 2025, vol. 30, p. e3009. https://doi.org/10.1590/0104-9224/SI30.09.
- Kokare S, Shen J, Fonseca PP, Lopes JG, Machado CM, Santos TG, et al. Wire arc additive manufacturing of a high-strength low-alloy steel part: Environmental impacts, costs, and mechanical properties. Int J Adv Manuf Technol 2024, vol. 134, pp. 453–475. https://doi.org/10.1007/s00170-024-14144-z.
- Lambiase F, Yanala PB, Pace F, Andreucci E, Paoletti A. A state of the art review of wire arc additive manufacturing (WAAM)—Part 1: Process fundamentals, parameters and materials. Int J Adv Manuf Technol 2025, vol. 138, pp. 4965–4993. https://doi.org/10.1007/s00170-025-15781-8.
- Habib N, Vafadar A, Guzzomi F. A comparative study of aluminium properties manufactured using additive friction stir deposition (AFSD) and wire arc additive manufacturing (WAAM). Prog Addit Manuf 2025, vol. 10, pp. 8963–8983. https://doi.org/10.1007/s40964-025-01217-y.
- Wahidi SI, Oterkus S, Oterkus E. Robotic welding techniques in marine structures and production processes: A systematic literature review. Mar Struct 2024, vol. 95, p. 103608. https://doi.org/10.1016/j.marstruc.2024.103608.
- Tryhubov R, Kryshchuk M. Numerical modeling and digital twins in wire arc additive manufacturing. Mech Adv Technol 2025, vol. 9, no. 3, pp. 357–371. https://doi.org/10.20535/2521-1943.2025.9.3(106).338860.
- Waheed MF, Bernadin S. In-situ analysis of vibration and acoustic data in additive manufacturing. SoutheastCon 2024, IEEE; 2024. pp. 812–817. https://doi.org/10.1109/SoutheastCon52093.2024.10500055.
- Peng A, Ma Y, Huang K, Wang L. Digital twin-driven framework for fatigue life prediction of welded structures considering residual stress. Int J Fatigue 2024, vol. 181, art. 108144. https://doi.org/10.1016/j.ijfatigue.2024.108144.
- Daneshian B, Höche D, Knudsen OØ, Skilbred AWB. Effect of climatic parameters on marine atmospheric corrosion: Correlation analysis of on-site sensors data. NPJ Mater Degrad 2023, vol. 7, p. 10. https://doi.org/10.1038/s41529-023-00329-6.
- Mu H, Polden J, Li Y, He F, Xia C, Pan Z. Layer-by-layer model-based adaptive control for wire arc additive manufacturing of thin-wall structures. J Intell Manuf 2022, vol. 33, no. 4, pp. 1165–1180. https://doi.org/10.1007/s10845-022-01920-5.
- Jyeniskhan N, Keutayeva A, Kazbek G, Ali MH, Shehab E. Integrating machine learning model and digital twin system for additive manufacturing. IEEE Access 2023, vol. 11, pp. 71113–71126. https://doi.org/10.1109/access.2023.3294486.
- Shahir ML, Shawn EL, Wong BS, Ann LL, Ellis WSK, Belden CCY, et al. Application of autonomous real-time digital twin for structural health monitoring and integrity assessment of damaged fixed offshore structures. Int Pet Technol Conf 2024. https://doi.org/10.2523/IPTC-23915-MS.
- Halme J, Souza Ramos I, Mikkola E. Digital twin for floating offshore wind foundations operation and maintenance management. Int Conf Offshore Mech Arct Eng 2024, vol. 87790, V002T02A057. https://doi.org/10.1115/OMAE2024-124269.
- Chen Z, Yuan L, Pan Z, Zhu H, Ma N, Ding D, et al. A comprehensive review and future perspectives of simulation approaches in wire arc additive manufacturing (WAAM). Int J Extreme Manuf 2024, vol. 7, no. 2, art. 022016. https://doi.org/10.1088/2631-7990/ada099.
- Chen B-Q, Videiro PM, Guedes Soares C. Opportunities and challenges to develop digital twins for subsea pipelines. J Mar Sci Eng 2022, vol. 10, no. 6, p. 739. https://doi.org/10.3390/jmse10060739.
- Treutler K, Wesling V. The current state of research of wire arc additive manufacturing (WAAM): A review. Appl Sci 2021, vol. 11, no. 18, p. 8619. https://doi.org/10.3390/app11188619.
- Połaski P, Golański D, Kołodziejczak P, Pakuła A. Effect of the electrode extension on the geometry of parts made of 316LSi steel by wire arc additive manufacturing method. Adv Sci Technol Res J 2024, vol. 18, no. 3, pp. 343–359. https://doi.org/10.12913/22998624/186362.
- Sahul M, Pavlík M, Sahul M, Kovačócy P, Martinkovič M. Effect of travel speed on the properties of 5087 aluminum alloy walls produced by wire and arc additive manufacturing. J Mater Eng Perform 2024, vol. 33, pp. 8582–8600. https://doi.org/10.1007/s11665-024-09166-3.
- Taşdemir A, Nohut S. An overview of wire arc additive manufacturing (WAAM) in shipbuilding industry. Ships Offshore Struct 2020, vol. 16, no. 7, pp. 797–814. https://doi.org/10.1080/17445302.2020.1786232.
- Gunasegaram DR, Murphy AB, Matthews MJ, DebRoy T. The case for digital twins in metal additive manufacturing. J Phys Mater 2021, vol. 4, no. 4, art. 040401. https://doi.org/10.1088/2515-7639/ac09fb.
- Orzolek SM, Semple JK, Fisher CR. Influence of processing on the microstructure of nickel aluminum bronze (NAB). Addit Manuf 2022, vol. 56, art. 102859. https://doi.org/10.1016/j.addma.2022.102859.
- Yang F, Wu C, Li R, Fang F, Dong L, Xiong W, et al. Wire arc additive manufacturing of dissimilar alloys: Processing strategies and interfacial phenomena. J Manuf Process 2025, vol. 156, pp. 463–496. https://doi.org/10.1016/j.jmapro.2025.10.079.
- Lee H, Yang H. Digital twinning and optimization of manufacturing process flows. J Manuf Sci Eng 2023, vol. 145, no. 11, art. 111008. https://doi.org/10.1115/1.4063234.
- HowCo. Additive manufacturing: Pushing the boundaries of what’s possible. In HowCo Group News. 2024. Retrieved from https://www.howcogroup.com/news/additive-manufacturing-pushing-the-boundaries-of-whats-possible/.
- European Space Agency. Additive manufacturing. In ESA Technology. 2026. Retrieved from https://technology.esa.int/program/advanced-manufacturing.
- Damen Shipyards Group. Damen and CEAD join forces to develop 3D-printed HDPE workboat. In Damen Insights Center. 2025. Retrieved from https://www.damen.com/insights-center/news/damen-and-cead-join-forces-to-develop-3d-printed-hdpe-workboat.
- Chen G, Yang J, Huang B, Ma C, Tian F, Ge L, et al. Toward digital twin of the ocean: From digitalization to cloning. Intell Mar Technol Syst 2023, vol. 1, p. 3. https://doi.org/10.1007/s44295-023-00003-2.
- Menges D, Rasheed A. Digital twin for autonomous surface vessels: Enabler for safe maritime navigation. arXiv:2411.03465, 2024. https://doi.org/10.48550/arXiv.2411.03465.
- Mahdi MM, Bajestani MS, Noh SD, Kim DB. Digital twin-based architecture for wire arc additive manufacturing using OPC UA. Robot Comput Integr Manuf 2025, vol. 94, art. 102944. https://doi.org/10.1016/j.rcim.2024.102944.
- Li J, Yin W, Yang B, Chen L, Dong R, Chen Y, et al. Modeling of digital twin workshop in planning via a graph neural network: The case of an ocean engineering manufacturing intelligent workshop. Appl Sci 2023, vol. 13, no. 18, art. 10134. https://doi.org/10.3390/app131810134.
- Jayasinghe S, Mahmoodian M, Sidiq A, Nanayakkara T, Alavi A, Mazaheri S, et al. Innovative digital twin with artificial neural networks for real-time monitoring of structural response: A port structure case study. Ocean Eng 2024, vol. 312, art. 119187. https://doi.org/10.1016/j.oceaneng.2024.119187.
- Sivakumar M, Panicker CJ, Balaji NS, Marxim Rahula Bharathi B, Suresh G. Additive manufacturing integration with welding: A focus on wire arc additive manufacturing (WAAM). In: Kunar S, Mandal G, editors. Advanced welding technologies. Scrivener Publishing LLC; 2025. pp. 513–545. https://doi.org/10.1002/9781394331925.ch25.
- Rauch M, Hascoet J. Opening new opportunities for aeronautic, naval and train large components realization with hybrid and twin manufacturing. J Mach Eng 2022, vol. 22, no. 4, pp. 5–20. https://doi.org/10.36897/jme/155812.
- Golyshev LV, Vinnitskii IP, Fil’ SA, Mysak IS, Sidenko A, Mishchenko YM. Economic parameters of the coal-fired TPP-210A boiler under nonstationary operating modes. Power Technol Eng 2003, vol. 37, no. 5, pp. 302–305. https://doi.org/10.1023/B:HYCO.0000009797.86215.08.
- Golyshev LV, Mysak IS, Dovgoteles GA, Sidenko AP, Kravets’ TYu. The effect of coal quality on the limitation of the nominal capacity of a power unit. Therm Eng 2001, vol. 48, no. 7, pp. 538–541.
- Golyshev LV, Fil’ SA, Mysak IS, Kotel’nikov NI, Sidorenko AP. Transient performance of a TPP-210A boiler performed with the use of a system of RCA-2000 analyzers. Power Technol Eng 2003, vol. 37, no. 4, pp. 244–247. https://doi.org/10.1023/A:1026385907278.
- Gulyaev IP, Dolmatov AV, Kharlamov MY, Gulyaev PY, Jordan VI, Krivtsun IV, et al. Arc-plasma wire spraying: An optical study of process phenomenology. J Therm Spray Technol 2015, vol. 24, no. 8, pp. 1566–1573. https://doi.org/10.1007/s11666-015-0356-6.
- Kharlamov MY, Krivtsun IV, Korzhyk VN. Dynamic model of the wire dispersion process in plasma-arc spraying. J Therm Spray Technol 2014, vol. 23, no. 3, pp. 420–430. https://doi.org/10.1007/s11666-013-0027-4.
- Adzhamskyy SV, Kononenko HA, Podolskyi RV. Analysis of structure after heat treatment of Inconel 718 heat-resistant alloys made by SLM-technology. Metallofiz Noveishie Tekhnol 2021, vol. 43, no. 7, pp. 909–924. https://doi.org/10.15407/mfint.43.07.0909.
- Adzhamskiy SV, Kononenko GА, Podolskyi RV. Influence of SLM-process parameters on the formation of the boundaries of parts of heat-resistant nickel alloy Inconel 718. Space Sci Technol 2021, vol. 7, no. 6, pp. 105–114. https://doi.org/10.15407/knit2021.06.105.
- Grigorenko GM, Adeeva LI, Tunik AY, Korzhik VN, Karpets MV. Plasma arc coatings produced from powder-cored wires with steel sheaths. Powder Metall Met Ceram 2020, vol. 59, no. 5–6, pp. 318–329. https://doi.org/10.1007/s11106-020-00165-2.
- Han J, Shi Y, Guo JC, Volodymyr K, Le WY, Dai FX. Porosity inhibition of aluminum alloy by power-modulated laser welding and mechanism analysis. J Manuf Process 2023, vol. 102, pp. 827–838. https://doi.org/10.1016/j.jmapro.2023.08.001.
- Babachenko OI, D’Omina KH, Kononenko HA, Dement’Yeva ZhA, Podol’s’kyy RV, Safronova OA. Influence of cooling rate at hardening of continuous casting blank on parameters of dendritic structure of carbon steel with 0.54% C. Metallofiz Noveishie Tekhnol 2021, vol. 43, no. 11, pp. 1537–1551. https://doi.org/10.15407/mfint.43.11.1537.
- Panchenko A, Voloshina A, Luzan P, Panchenko I, Volkov S. Kinematics of motion of rotors of an orbital hydraulic machine. IOP Conf Ser Mater Sci Eng 2021, vol. 1021, no. 1, art. 012045. https://doi.org/10.1088/1757-899X/1021/1/012045.
- Panchenko A, Voloshina A, Sadullozoda SS, Boltyansky O, Panina V. Influence of the design features of orbital hydraulic motors on the change in the dynamic characteristics of hydraulic drives. In: Lecture Notes in Mechanical Engineering. Springer; 2022. pp. 101–111. https://doi.org/10.1007/978-3-031-06044-1_10.
- Kyurchev V, Kiurchev S, Rezvaya K, Fatyeyev A, Głowacki S. Assessing the reliability of a mathematical model of working processes occurring in a hydraulic drive. In: Lecture Notes in Mechanical Engineering. Springer; 2024. pp. 281–292. https://doi.org/10.1007/978-3-031-63720-9_24.
- Voloshina A, Panchenko A, Titova O, Panchenko I. Changes in the dynamics of the output characteristics of mechatronic systems with planetary hydraulic motors. J Phys Conf Ser 2021, vol. 1741, no. 1, art. 012045. https://doi.org/10.1088/1742-6596/1741/1/012045.
- Voloshina A, Panchenko A, Boltynskiy O, Panchenko I, Titova O. Justification of the kinematic diagrams for the distribution system of a planetary hydraulic motor. Int J Eng Technol (UAE) 2018, vol. 7, no. 4, pp. 6–11. https://doi.org/10.14419/ijet.v7i4.3.19544.
- Wang K, Hu Q, Liu J. Digital twin-driven approach for process management and traceability towards ship industry. Processes 2022, vol. 10, no. 6, p. 1083. https://doi.org/10.3390/pr10061083.
- Li Y, Su C, Zhu J. Comprehensive review of wire arc additive manufacturing: hardware system, physical process, monitoring, property characterization, application and future prospects. Results Eng 2021, vol. 13, art. 100330. https://doi.org/10.1016/j.rineng.2021.100330.
- Zhao F, Huang J, Zhang Z. Welding residual stress prediction with varying cooling rate in phase transformation. Opt Laser Technol 2024, vol. 181, art. 112010. https://doi.org/10.1016/j.optlastec.2024.112010.
- Ermakova A, Ganguly S, Razavi N, Berto F, Mehmanparast A. Corrosion-fatigue crack growth behaviour of wire arc additively manufactured ER70S-6 steel parts in marine environments. Eur J Mech A/Solids 2022, vol. 96, art. 104739. https://doi.org/10.1016/j.euromechsol.2022.104739.
- Kumar A, Sadhya S, Khan AU, Madhukar YK. Improvement in process efficiency of WAAM-TIG by in-situ voltage-current-temperature monitoring and feedback control system. Int J Precis Eng Manuf 2025, vol. 26, no. 7, pp. 1673–1681. https://doi.org/10.1007/s12541-024-01208-z.
- Shi C, Du F, Wu Q. A digital twin architecture for wireless networked adaptive active noise control. IEEE/ACM Trans Audio Speech Lang Process 2022, vol. 30, pp. 2768–2777. https://doi.org/10.1109/taslp.2022.3199992.
- Wang S, Wang J. Safety of offshore platforms. In: Cui W, Fu S, Hu Z, editors. Encyclopedia of ocean engineering. Springer; 2022. pp. 1519–1527. https://doi.org/10.1007/978-981-10-6946-8_25.
- Li Z, Hou Z, Pan Z, Wu D, Xu J. A nonautoregressive dynamic model based welding parameter planning method for varying geometry beads in WAAM. IEEE Trans Ind Electron 2022, vol. 70, no. 3, pp. 2770–2779. https://doi.org/10.1109/tie.2022.3172762.
- Hoffman R, Friedman P, Wetherbee D. Digital twins in shipbuilding and ship operation. In: Crespi N, Drobot AT, Minerva R, editors. The digital twin. Springer; 2023. pp. 799–847. https://doi.org/10.1007/978-3-031-21343-4_28.
- Li L, Aslam S, Wileman A, Perinpanayagam S. Digital twin in aerospace industry: A gentle introduction. IEEE Access 2021, vol. 10, pp. 9543–9562. https://doi.org/10.1109/access.2021.3136458.
Language: English
Page range: 112 - 123
Published on: Sep 10, 2026
Published by: Gdansk University of Technology
In partnership with: Paradigm Publishing Services
Keywords:
Related subjects:
© 2026 Petro Pavlenko, published by Gdansk University of Technology
This work is licensed under the Creative Commons Attribution 4.0 License.