Effects of Ultrasonic-Frequency Pulse Current on Arc Stability, Acoustic Signal Emission and Weld Quality in Underwater Wet Multi-Layer Multi-Pass Welding with Q345 Steel
References
- Riccioli F, Alkhateeb S, Mol A, Pahlavan L. Feasibility assessment of non-contact acoustic emission monitoring of corrosion-fatigue damage in submerged steel structures. Ocean Eng 2024, vol. 312, p. 119296. https://doi.org/10.1016/j.oceaneng.2024.119296.
- Świerczyńska A, Varbai B, Pandey C, Fydrych D. Exploring the trends in flux-cored arc welding: Scientometric analysis approach. Int J Adv Manuf Technol 2024, vol. 130, pp. 87–110. https://doi.org/10.1007/s00170-023-12682-6.
- Hu C, Li H, Liu X, Hu X, Zhao X, Fan Z, et al. Investigation on microstructure and properties of the local dry underwater TIG welding of 304L stainless steel. Mater Today Commun 2025, vol. 44, p. 111978. https://doi.org/10.1016/j.mtcomm.2025.111978.
- Costa PS, Altamirano Guerrero G, Ramírez Luna LE, Guía Hernández LA. Effect of Heat Input on the Metallurgical Behavior of Underwater Wet Welding Using FCAW-S Process. Soldag Insp 2024, vol. 29, p. e2902. https://doi.org/10.1590/0104-9224/si29.02.
- Guo N, Zhang X, Fu Y, Luo W, Chen H, Long He J. A novel strategy to prevent hydrogen charging via spontaneously molten-slag-covering droplet transfer mode in underwater wet FCAW. Mater Des 2023, vol. 226, p. 111636. https://doi.org/10.1016/j.matdes.2023.111636.
- Tomków J, Fydrych D, Łabanowski J. Effect of water salinity on properties of multipass underwater wet manual metal arc welded joints. Weld World 2023, vol. 67, pp. 2381–90. https://doi.org/10.1007/s40194-023-01554-y.
- Castellanos-Gonzalez O, Sanchez Lobo E, Fydrych D, Silva Cota B, Fagundes Júnior JG, Moreno-Uribe AM. Operational performance and weld bead characteristics of experimental tubular-wires for underwater welding. Adv Sci Technol Res J 2024, vol. 18, pp. 433–47. https://doi.org/10.12913/22998624/193525.
- Cisquini P, Lobo EJS, Moreno-Uribe AM, Pessoa ECP, Bracarense AQ, Lins VFC. Effect of welding parameters on the corrosion behavior of underwater wet welds with new oxyrutile WW70 and commercial rutile E6013 electrode. J Mater Res Technol 2025, vol. 38, pp. 3734–45. https://doi.org/10.1016/j.jmrt.2025.08.131.
- Tomków J, Landowski M, Fydrych D, Rogalski G. Underwater wet welding of S1300 ultra-high strength steel. Mar Struct 2022, vol. 81, p. 103120. https://doi.org/10.1016/j.marstruc.2021.103120.
- Brätz O, Klett J, Wolf T, Henkel K-M, Maier HJ, Hassel T. Induction heating in underwater wet welding—Thermal input, microstructure and diffusible hydrogen content. Materials 2022, vol. 15, p. 1417. https://doi.org/10.3390/ma15041417.
- Guo N, Du Y, Maksimov S, Feng J, Yin Z, Krazhanovskyi D, et al. Study of metal transfer control in underwater wet FCAW using pulsed wire feed method. Weld World 2018, vol. 62, pp. 87–94. https://doi.org/10.1007/s40194-017-0497-y.
- Chen J, Qiao Y, Zhao J, Fu Q, Zhang R, Dong Y, et al. Research status and prospects of novel technology in underwater wet arc welding/laser cladding. J Manuf Process 2025, vol. 148, pp. 273–96. https://doi.org/10.1016/j.jmapro.2025.05.029.
- Wang J, Sun Q, Wu L, Liu Y, Teng J, Feng J. Effect of ultrasonic vibration on microstructural evolution and mechanical properties of underwater wet welding joint. J Mater Process Technol 2017, vol. 246, pp. 185–97. https://doi.org/10.1016/j.jmatprotec.2017.03.019.
- Chen J, Yang Q, Liu Z, Zhang R, Dong Y, Chen J, et al. Dynamic behavior regulation of droplet transfer based on arc-bubble control by ultrasound-induced during underwater wet welding. J Manuf Process 2024, vol. 129, pp. 147–60. https://doi.org/10.1016/j.jmapro.2024.08.050.
- Wang J, Sun Q, Hou S, Zhang T, Jin P, Feng J. Dynamic control of current and voltage waveforms and droplet transfer for ultrasonic-wave-assisted underwater wet welding. Mater Des 2019, vol. 181, p. 108051. https://doi.org/10.1016/j.matdes.2019.108051.
- Kuang X, Qi B, Zheng H. Effect of pulse mode and frequency on microstructure and properties of 2219 aluminum alloy by ultrahigh-frequency pulse metal-inert gas welding. J Mater Res Technol 2022, vol. 20, pp. 3391–407. https://doi.org/10.1016/j.jmrt.2022.08.094.
- Wang Y, Yu C, Lu H, Chen J. Research status and future perspectives on ultrasonic arc welding technique. J Manuf Process 2020, vol. 58, pp. 936–54. https://doi.org/10.1016/j.jmapro.2020.09.005.
- Xia Y, Dong B, Fan Y, Chen Q, Cai X, Lin S. Hybrid ultrasonic arc welding of nickel-based alloys: Improved cavitation and grain refinement. Weld World 2025, vol. 69, pp. 3115–27. https://doi.org/10.1007/s40194-025-02070-x.
- Morisada Y, Fujii H, Inagaki F, Kamai M. Development of high frequency tungsten inert gas welding method. Mater Des 1980-2015 2013, vol. 44, pp. 12–6. https://doi.org/10.1016/j.matdes.2012.07.054.
- Cui X, Chen J, Li S, Su H, Wang L, Wu C. Dynamic behavior of ultrasonic frequency pulsed current-assisted gas metal arc welding. Phys Fluids 2025, vol. 37, p. 13628. https://doi.org/10.1063/5.0251557.
- Yang M, Yang Z, Qi B. The effect of pulsed frequency on the plasma jet force with ultra high-frequency pulsed arc welding. Weld World 2015, vol. 59, pp. 875–82. https://doi.org/10.1007/s40194-015-0261-0.
- Wang D, Wang Y, Liu W, Hua C, Yu C, Lu H. Multiscale investigation of microstructure optimization in the arc additive manufacturing and arc welding by self-induced ultrasound. Int J Heat Mass Transf 2021, vol. 180, p. 121790. https://doi.org/10.1016/j.ijheatmasstransfer.2021.121790.
- Wu K, Liu Z, Chen Q, Wu Y, Chen Z, Hong X. Effect of high-frequency pulse frequency on arc characteristics and weld formation of aluminum alloy in variable polarity high-frequency pulse GMAW. Weld World 2025, vol. 69, pp. 2691–709. https://doi.org/10.1007/s40194-025-02012-7.
- Wang H, Chen J, Su H, Li S, Wu C. Revealing the synergistic effects of arc shrinkage and microstructure evolution in ultrasonic frequency pulsed current-assisted GMAW of 316L stainless steel. J Manuf Process 2025, vol. 155, pp. 292–307. https://doi.org/10.1016/j.jmapro.2025.10.037.
- Wang JY, He CH, Huang JZ, Chen J, Fang CF. An ultrasonic-frequency pulsed arc approach to improve the life of plasma cutting electrode. Key Eng Mater 2010, vol. 450, pp. 288–91. https://doi.org/10.4028/www.scientific.net/KEM.450.288.
- Chen J, Wen Z, Jia C, Zhao B, Wu C. The mechanisms of underwater wet flux-cored arc welding assisted by ultrasonic frequency pulse high-current. J Mater Process Technol 2022, vol. 304, p. 117567. https://doi.org/10.1016/j.jmatprotec.2022.117567.
- Cui X, Chen J, Shi L, Li S, Guo N, Wu C. Investigating the effect of hydrostatic pressure on arc and bubble transport phenomenon in underwater wet self-shielded flux cored arc welding. Appl Therm Eng 2024, vol. 257, p. 124279. https://doi.org/10.1016/j.applthermaleng.2024.124279.
- Cui X, Chen J, Zheng T, Su H, Li S, Wu C. Experimental and simulation research on the dynamic behavior of arc and bubble in ultrasonic frequency pulse current-assisted underwater wet flux cored arc welding. Int J Heat Mass Transf 2025, vol. 242, p. 126853. https://doi.org/10.1016/j.ijheatmasstransfer.2025.126853.
- Liu S, Ji H, Zhao W, Hu C, Wang J, Li H, et al. Evaluation of arc signals, microstructure and mechanical properties in ultrasonic-frequency pulse underwater wet welding process with Q345 steel. Metals 2022, vol. 12, p. 2119. https://doi.org/10.3390/met12122119.
- Cui X, Chen J, Liang J, Su H, Li S, Wu C. Numerical investigation of arc and droplet dynamics in local dry underwater welding under varying ambient pressures. Int J Therm Sci 2025, vol. 214, p. 109931. https://doi.org/10.1016/j.ijthermalsci.2025.109931.
- Ma Q, Li H, Liu S, Liu D, Wang P, Zhu Q, et al. Comparative evaluation of self-shielded flux-cored wires designed for high strength low alloy steel in underwater wet welding: Arc stability, slag characteristics, and joints’ quality. J Mater Eng Perform 2022, vol. 31, pp. 5231–44. https://doi.org/10.1007/s11665-022-06683-x.
- Li H, Liu S, Ma Q, Wang P, Liu D, Zhu Q. Investigation of process stability and weld quality of underwater wet flux-cored arc welding of low-alloy high-strength steel with oxy-rutile wire. Pol Marit Res 2021, vol. 28, pp. 101–9. https://doi.org/10.2478/pomr-2021-0037.
- Wang Y, Liu W, Wang D, Yu C, Xu J, Lu H, et al. Simultaneously enhanced strength and ductility of TIG welds in inconel 718 super-alloy via ultrasonic pulse current. Mater Sci Eng A 2021, vol. 807, p. 140894. https://doi.org/10.1016/j.msea.2021.140894.
- Kumar V, Parida MK, Albert SK. The state-of-the-art methodologies for quality analysis of arc welding process using weld data acquisition and analysis techniques. Int J Syst Assur Eng Manag 2022, vol. 13, pp. 34–56. https://doi.org/10.1007/s13198-021-01282-w.
- He L, Yang P, Li L, Wu M. The ultrasonic characteristics of high frequency modulated arc and its application in material processing. Ultrasonics 2014;54:2178–83. https://doi.org/10.1016/j.ultras.2014.06.003.
- Wang Z, Jiang D, Wu J, Xu M. A review on high-frequency pulsed arc welding. J Manuf Process 2020, vol. 60, pp. 503–19. https://doi.org/10.1016/j.jmapro.2020.10.054.
- Cullen M, Ji JC. Online defect detection and penetration estimation system for gas metal arc welding. Int J Adv Manuf Technol 2025, vol. 136, pp. 2143–64. https://doi.org/10.1007/s00170-024-14932-7.
- He L-B, Li L-M, Hao H-W, Wu M-S, Zhou R-L. Grain refinement and high performance of titanium alloy joint using arc-ultrasonic gas tungsten arc welding. Sci Technol Weld Join 2006, vo. 11, pp. 72–4. https://doi.org/10.1179/174329306X77083.
- Bellamkonda PN, Sudersanan M, Visvalingam B. A study on tensile properties and microstructural characteristics of wire arc additive manufactured low carbon steel cylindrical components. Weld Int 2022, vol. 6, pp. 443–54. https://doi.org/10.1080/09507116.2022.2097897.
- Li Y, Wu S, Li H, Dong Y, Cheng F. Submerged arc additive manufacturing (SAAM) of low-carbon steel: Effect of in-situ intrinsic heat treatment (IHT) on microstructure and mechanical properties. Addit Manuf 2021, vol. 46, p. 102124. https://doi.org/10.1016/j.addma.2021.102124.
- Rafieazad M, Ghaffari M, Vahedi Nemani A, Nasiri A. Microstructural evolution and mechanical properties of a low-carbon low-alloy steel produced by wire arc additive manufacturing. Int J Adv Manuf Technol 2019, vol. 105, pp. 2121–34. https://doi.org/10.1007/s00170-019-04393-8.
- Wu L, Chen J, Wen Z, Su H, Wu C. Effect of ultrasonic frequency pulse current on underwater wet flux-cored arc welding process of low carbon steel. J Mater Eng Perform 2025, pp. 0–17. https://doi.org/10.1007/s11665-025-12066-9.
- Ricks RA, Howell PR, Barritte GS. The nature of acicular ferrite in HSLA steel weld metals. J Mater Sci 1982, vol. 17, pp. 732–40. https://doi.org/10.1007/BF00540369.
- Guo Y, Li C, Liu Y, Yu L, Ma Z, Liu C, et al. Effect of microstructure variation on the corrosion behavior of high-strength low-alloy steel in 3.5wt% NaCl solution. Int J Miner Metall Mater 2015, vol. 22, pp. 604–12. https://doi.org/10.1007/s12613-015-1113-z.
- Shin SY, Hwang B, Lee S, Kim NJ, Ahn SS. Correlation of microstructure and Charpy impact properties in API X70 and X80 line-pipe steels. Mater Sci Eng A 2007, vol. 458, pp. 281–9. https://doi.org/10.1016/j.msea.2006.12.097.
Language: English
Page range: 105 - 121
Published on: May 6, 2026
Published by: Gdansk University of Technology
In partnership with: Paradigm Publishing Services
Publication frequency: 4 issues per year
Keywords:
Related subjects:
© 2026 Hongliang Li, Rui Yang, Junjie Hu, Rui Zhao, Jida Wang, Zeshi Jin, Feng Yu, published by Gdansk University of Technology
This work is licensed under the Creative Commons Attribution 4.0 License.