References
- DNV, “Maritime Forecast To 2050,” DNV Energy Transition Outlook 2022. dnv.com, p. 74, 2022. [Online]. Available: dnv.com
- J. Balaouras and S. L. Larsen, “Increase in stern tube damages - a concerning new trend ?” GARD, 2023. [Online]. Available: https://www.gard.no
- W. Litwin, Water-Lubricated Journal Bearings, 1st ed., no. 1. Elsevier Inc., 2023. doi: 10.1016/B978-0-443-13457-9.00016-7.
- S. A. McKee, “Effect of abrassive in lubricant,” SAE Tech. Pap., p. 270009, 1927, doi: 10.4271/270009.
- H. Xiao, S. Liu, D. Wang, and Y. Chen, “Abrasion–Corrosion Behaviors of Steel–Steel Contact in Seawater Containing Abrasive Particles,” Tribol. Trans., vol. 61, no. 1, pp. 12–18, 2018, doi: 10.1080/10402004.2016.1268227.
- R. Zuo, G. Wang, G. Hu, S. Zhao, and G. Wei, “Tribological properties of hydrogenated nitrile rubber in confrontation with hard particles under different axial loads,” Tribol. Int., vol. 153, no. May 2020, p. 106649, 2021, doi: 10.1016/j. triboint.2020.106649.
- E. Harika, M. Hélène, J. Bouyer, and M. Fillon, “Impact of lubricant contamination with water on hydrodynamic thrust bearing performance Impact de la pollution des lubrifiants par de l ’ eau sur les performances d ’ une butée hydrodynamique,” in 9th EDF/Pprime (LMS) Poitiers Workshop, 2010, no. October, pp. 1–9.
- M. M. Khonsari and E. R. Booser, “Effect of contamination on the performance of hydrodynamic bearings,” Proc. Inst. Mech. Eng. Part J J. Eng. Tribol., vol. 220, no. 5, pp. 419–428, 2006, doi: 10.1243/13506501J00705.
- C. Yang, X. Zhou, J. Huang, F. Kuang, and X. Liu, “Effects of sediment size and type on the tribological properties of NBR in water,” Wear, vol. 477, no. February, p. 203800, 2021, doi: 10.1016/j.wear.2021.203800.
- W. Litwin and S. Kropp, “Sliding bearings with sintered bronze bush lubricated by contaminated water with solid particles – Theoretical and experimental studies,” Wear, vol. 532–533, no. June, p. 205070, 2023, doi: 10.1016/j. wear.2023.205070.
- C. Yuan, Z. Guo, W. Tao, C. Dong, and X. Bai, “Effects of different grain sized sands on wear behaviours of NBR/casting copper alloys,” Wear, vol. 384–385, pp. 185–191, 2017, doi: 10.1016/j.wear.2017.02.019.
- E. Piątkowska, “Influence of solid particle contamination on the wear process in water lubricated marine strut bearings with NBR and PTFE bushes,” Polish Marit. Res., vol. 28, no. 4, pp. 167–178, 2021, doi: 10.2478/pomr-2021-0059.
- W. Litwin, “Marine Propeller Shaft Bearings under Low-Speed Conditions: Water vs. Oil Lubrication,” Tribol. Trans., vol. 62, no. 5, 2019, doi: 10.1080/10402004.2019.1625991.
- W. Litwin, “Water lubricated marine stern tube bearings - Attempt at estimating hydrodynamic capacity,” in Proceedings of the ASME/STLE International Joint Tribology Conference 2009, IJTC2009, 2010. doi: 10.1115/IJTC2009-15068.
- Y. Zhimin et al., “Study on tribological and vibration performance of a new UHMWPE/graphite/NBR water lubricated bearing material,” Wear, vol. 332–333, pp. 872–878, 2015, doi: 10.1016/j.wear.2014.12.054.
- H. Xing, Q. Wu, Z. Wu, and S. Duan, “Elastohydrodynamic lubrication analysis of marine sterntube bearing based on multi-body dynamics,” Energy Procedia, vol. 16, no. PART B, pp. 1046–1051, 2011, doi: 10.1016/j.egypro.2012.01.167.
- Y. xin Zhang, K. Chen, and D. peng Jiang, “CFD analysis of the lateral loads of a propeller in oblique flow,” Ocean Eng., vol. 202, no. February, p. 107153, 2020, doi: 10.1016/j. oceaneng.2020.107153.
- C. Testa, L. Greco, and J. Bosschers, “Marine propeller shaft loading analysis in moderate oblique-flow conditions,” Ocean Eng., vol. 262, no. September, p. 112199, 2022, doi: 10.1016/j.oceaneng.2022.112199.
- J. Li, Y. Qu, Z. Zhang, D. Xie, H. Hua, and J. Wu, “Fluid-structure interaction analysis of the propeller-shafting system in a non-uniform wake,” Ocean Eng., vol. 289, no. P1, p. 116189, 2023, doi: 10.1016/j.oceaneng.2023.116189.
- O. K. Kinaci et al., “Free-running tests for DTC self-propulsion – An investigation of lateral forces due to the rudder and the propeller,” Appl. Ocean Res., vol. 116, no. March, p. 102877, 2021, doi: 10.1016/j.apor.2021.102877.
- S. Sun, Y. Zhang, Z. Guo, X. Li, and Z. Huang, “Research on propeller bearing force of a four-screw ship in oblique flow,” Ocean Eng., vol. 276, no. February, p. 114164, 2023, doi: 10.1016/j.oceaneng.2023.114164.
- J. Ha et al., “Experimental study on the propulsion performance of a partially submerged propeller,” Int. J. Nav. Archit. Ocean Eng., vol. 15, p. 100516, 2023, doi: 10.1016/j. ijnaoe.2023.100516.
- N. Duan, C. Wu, Y. Huang, Z. Zhang, and H. Hua, “Lateral vibration analysis and active control of the propeller-shafting system using a scaled experimental model,” Ocean Eng., vol. 267, no. September 2022, p. 113285, 2023, doi: 10.1016/j.oceaneng.2022.113285.
- C. L. Meng et al., “Propeller hydrodynamic excitation influenced by shafting whirling vibration considering different nonuniform inflow conditions: A numerical study,” Ocean Eng., vol. 288, no. P1, p. 116021, 2023, doi: 10.1016/j.oceaneng.2023.116021.
- “Incomplete Propeller Immersion – Risk of Propeller Shaft Bearing,” DNV Tech. Regul. NEWS, no. 01, pp. 3–5, 2017.
- R. Orndorff, “Water lubricated rubber bearings, history and new developments,” Nav Eng J, pp. 39–52, 1985.
- Wojciech Litwin, “2015_TI_Propertiescomparisonofrubb erandthreelayerPTFE-NBR-bronze,” Tribol. Interantional, 2015.
- “Shaft Alignment and Propeller Shaft Aft Bearing Performance – Recent Trends Call for Action,” DNV-GL, 2018. https://www.dnvgl.com/news/shaft-alignment-and-propeller-shaft-aft-bearing-performance-recent-trends-call-for-action--111385
- M. Damrat, A. Zaborska, and M. Zajaczkowski, “Sedimentation from suspension and sediment accumulation rate in the River Vistula prodelta, Gulf of Gdańsk (Baltic Sea),” Oceanologia, vol. 55, no. 4, pp. 937–950, 2013, doi: 10.5697/oc.55-4.937.
- T. Leipe and B. Sea, “The kaolinite/chlorite clay mineral ratio in surface sediments of the southern Baltic Sea as an indicator for long distance transport of fine-grained material,” Baltica, vol. 16, pp. 31–36, 2003.
- J. F. Archard and W. Hirst, “The wear of metals under unlubricated conditions,” Proc. R. Soc. London. Ser. A. Math. Phys. Sci., vol. 236, no. 1206, pp. 397–410, 1956, doi: 10.1098/rspa.1956.0144.
- W. Litwin and C. Dymarski, “Experimental research on water-lubricated marine stern tube bearings in conditions of improper lubrication and cooling causing rapid bush wear,” Tribol. Int., 2016, doi: 10.1016/j.triboint.2015.12.005.
- A. Franceschi, B. Piaggio, D. Villa, and M. Viviani, “Development and assessment of CFD methods to calculate propeller and hull impact on the rudder inflow for a twin-screw ship,” Appl. Ocean Res., vol. 125, no. May, p. 103227, 2022, doi: 10.1016/j.apor.2022.103227.
- H. P. Guo and Z. J. Zou, “A RANS-based study of the impact of rudder on the propeller characteristics for a twin-screw ship during maneuvers,” Ocean Eng., vol. 239, no. February, p. 109848, 2021, doi: 10.1016/j.oceaneng.2021.109848.
- O. F. Sukas, O. K. Kinaci, and S. Bal, “System-based prediction of maneuvering performance of twin-propeller and twin-rudder ship using a modular mathematical model,” Appl. Ocean Res., vol. 84, no. January, pp. 145–162, 2019, doi: 10.1016/j.apor.2019.01.008.