Environmental Marine Degradation of PLA/Wood Composite as an Alternative Sustainable Boat Building Material
References
- Y. Praharsi, M. A. Jami, G. Suhardjito, and H. M. Wee. “Modeling a traditional fishing boat building in East Java, Indonesia.” Ocean Engineering. 189, 2019, doi: 10.1016/j.oceaneng.2019.106234.
- K. Kránitz, W. Sonderegger, C. T. Bues, and P. Niemz. “Effects of aging on wood: a literature review.” Wood Science and Technology. 50 (1), 2016, 7–22, doi: 10.1007/s00226-015-0766-0.
- F. E. Bendourou, G. Suresh, M. A. Laadila, P. Kumar, T. Rouissi, G. S. Dhillon, K. Zied, S. K. Brar, and R. Galvez. “Feasibility of the use of different types of enzymatically treated cellulosic fibres for polylactic acid (PLA) recycling.” Waste Management. 121, 2021, 237–247, doi: 10.1016/j.wasman.2020.11.058.
- T. N. Maraseni, S. Phimmavong, R. J. Keenan, V. Vongkhamsao, G. Cockfield, and H. Smith. “Financial returns for different actors in a teak timber value chain in Paklay District, Lao PDR.” Land Use Policy. 75, 2018, 145–154, doi: 10.1016/J.LANDUSEPOL.2018.03.037.
- C. Xu, C. Sun, H. Wan, H. Tan, J. Zhao, and Y. Zhang. “Microstructure and physical properties of poly(lactic acid)/polycaprolactone/rice straw lightweight bio-composite foams for wall insulation.” Construction and Building Materials. Vol. 354, 2022, 129216, doi: 10.1016/j.conbuildmat.2022.129216.
- C. M. Chan, S. Pratt, P. Halley, D. Richardson, A. Werker, B. Laycock, and L. J. Vandi. “Mechanical and physical stability of polyhydroxyalkanoate (PHA)-based wood plastic composites (WPCs) under natural weathering.” Polymer Testing. 73, 2019, 214–221, doi: 10.1016/J.POLYMERTESTING.2018.11.028.
- S. Kumar, R. Singh, T. P. Singh, and A. Batish. “PLA Composite Matrix as Functional Prototypes for Four Dimensional Applications.” Encyclopedia of Materials: Composites. 2019, 1091–1100, doi: 10.1016/B978-0-12-803581-8.11595-4.
- J. Tian, R. Zhang, Y. Wu, and P. Xue. “Additive manufacturing of wood flour/polyhydroxyalkanoates (PHA) fully bio-based composites based on micro-screw extrusion system.” Materials and Design. 199, 2021, doi: 10.1016/j.matdes.2020.109418.
- J. Liu, L. Sun, W. Xu, Q. Wang, S. Yu, and J. Sun. “Current advances and future perspectives of 3D printing natural-derived biopolymers.” Carbohydrate Polymers. 207, 2019, 297–316, doi: 10.1016/J.CARBPOL.2018.11.077.
- N. Degiuli, A. Farkas, I. Martić, I. Zeman, V. Ruggiero, and V. Vasiljević. “Numerical and experimental assessment of the total resistance of a yacht.” Brodogradnja. 72 (3), 2021, 61–80, doi: 10.21278/brod72305.
- N. P. Nhung, N. M. Chi, P. Q. Thu, B. H. Thuong, D. Ban, and B. Dell. “Market and policy setting for the trade in Dalbergia tonkinensis, a rare and valuable rosewood, in Vietnam.” Trees, Forests and People. 1, 2021, 100002, doi: 10.1016/J.TFP.2020.100002.
- A. Duigou, D. Correa, M. Ueda, R. Matsuzaki, and M. Castro. “A review of 3D and 4D printing of natural fibre biocomposites.” In Materials and Design. 194, 2020, doi: 10.1016/j.matdes.2020.108911.
- J. Antonio Travieso-Rodriguez, M. D. Zandi, R. Jerez-Mesa, and J. Lluma-Fuentes. “Fatigue behaviour of PLA-wood composite manufactured by fused filament fabrication.” Journal of Materials Research and Technology. 9 (4), 2020, 8507–8516, doi: 10.1016/j.jmrt.2020.06.003.
- R. Pommier, G. Grimaud, M. Prinçaud, N. Perry, and G. Sonnemann. “Comparative environmental life cycle assessment of materials in wooden boat ecodesign.” International Journal of Life Cycle Assessment. 21 (2), 2016, 265–275, doi: 10.1007/s11367-015-1009-1.
- Ş. O. Taş and B. Şener. “The Use of Additive Manufacturing in Maritime Industry.” International Journal of Engineering Trends and Technology. 67(6), 2019, 47–51, doi: 10.14445/22315381/ijett-v67i6p209.
- A. Joseph Arockiam, K. Subramanian, R. G. Padmanabhan, R. Selvaraj, D. K. Bagal, and S. Rajesh. “A review on PLA with different fillers used as a filament in 3D printing.” Materials Today: Proceedings. 2021, doi: 10.1016/J.MATPR.2021.09.413.
- A. Vedrtnam, S. Kumar, and S. Chaturvedi. “Experimental study on mechanical behaviour, biodegradability, and resistance to natural weathering and ultraviolet radiation of wood-plastic composites.” Composites Part B: Engineering. 176, 2019, 107282, doi: 10.1016/J.COMPOSITESB.2019.107282.
- M. Kariz, M. Sernek, M. Obućina, and M. K. Kuzman. “Effect of wood content in FDM filament on properties of 3D printed parts.” Materials Today Communications. 14, 2018, 135–140, doi: 10.1016/j.mtcomm.2017.12.016.
- X. Wang, F. Sotoudehniakarani, Z. Yu, J. J. Morrell, J. Cappellazzi, and A. G. Mcdonald. “Evaluation of corrugated cardboard biochar as reinforcing fibre on properties, biodegradability and weatherability of wood-plastic composites.” Polymer Degradation and Stability. 168, 2019, 108955, doi: 10.1016/J.POLYMDEGRADSTAB.2019.108955.
- K. C. Hung, Y. L. Chen, and J. H. Wu. “Natural weathering properties of acetylated bamboo plastic composites.” Polymer Degradation and Stability. 97 (9), 2012, 1680–1685, doi: 10.1016/J.POLYMDEGRADSTAB.2012.06.016.
- G. T. Kirker, C. Brischke, L. Passarini, and S. L. Zelinka. “Salt damage in wood: Controlled laboratory exposures and mechanical property measurements.” Wood and Fibre Science 52 (1), 2020, 44–52, doi: 10.22382/wfs-2020-005.
- Z. Cui, X. Li, K. Xiao, and C. Dong, “Atmospheric corrosion of field-exposed AZ31 magnesium in a tropical marine environment.” Corrosion Science 76, 2013, 243–256, doi: 10.1016/j.corsci.2013.06.047.
- M. Ouda, Y. Ibrahim, P. Kallem, B. Govindan, F. Banat, and S. W. Hasan. “Highly permeable, environmentally-friendly, antifouling polylactic acid-hydroxyapatite/polydopamine (PLA-HAp/PDA) ultrafiltration membranes.” Journal of Cleaner Production. 330, 2022, doi: 10.1016/j.jclepro.2021.129871.
- M. Hetzer and D. De Kee. “Wood/polymer/nanoclay composites, environmentally friendly sustainable technology: A review.” In Chemical Engineering Research and Design. 86 (10), 2008, 1083–1093, doi: 10.1016/j.cherd.2008.05.003.
- M. A. Jenkins, R. N. Klein, and V. L. Mcdaniel. “Yellow pine regeneration as a function of fire severity and post-burn stand structure in the southern Appalachian Mountains.” Forest Ecology and Management. 262 (4), 2021, 681–691, doi: 10.1016/J.FORECO.2011.05.001.
- M. A. Binhussain and M. M. El-Tonsy. “Palm leaf and plastic waste wood composite for out-door structures.” Construction and Building Materials. 47, 2013, 1431–1435, doi: 10.1016/j.conbuildmat.2013.06.031.
- M. Fernandez-Vicente, W. Calle, S. Ferrandiz, and A. Conejero. “Effect of Infill Parameters on Tensile Mechanical Behaviour in Desktop 3D Printing.” 3D Printing and Additive Manufacturing. 3 (3), 2016, 183–192, doi: 10.1089/3dp.2015.0036.
- E. Castro-Aguirre, F. Iñiguez-Franco, H. Samsudin, X. Fang, and R. Auras. “Poly(lactic acid)—Mass production, processing, industrial applications, and end of life.” In Advanced Drug Delivery Reviews. 107, 2016, 333–366, doi: 10.1016/j.addr.2016.03.010.
- A. Klüppel and C. Mai. “Effect of seawater wetting on the weathering of wood.” European Journal of Wood and Wood Products. 76 (3), 2018, 1029–1035, doi: 10.1007/s00107-017-1268-6.
- D. Deb and J. M. Jafferson. “Natural fibres reinforced FDM 3D printing filaments.” Materials Today: Proceedings. 46, 2021, 1308–1318, doi: 10.1016/j.matpr.2021.02.397.
Language: English
Page range: 127 - 134
Published on: Mar 29, 2024
Published by: Gdansk University of Technology
In partnership with: Paradigm Publishing Services
Publication frequency: 4 times per year
Keywords:
Related subjects:
© 2024 Selin Barış Çamlı, Gökdeniz Neşer, Ayberk Sözen, published by Gdansk University of Technology
This work is licensed under the Creative Commons Attribution 4.0 License.