References
- 1. IMO, International Convention for the Safety of Life At Sea, part B. Prevention of fire and explosion, paragraph 2.2.5.2. SOLAS Consolidated Edition 2020. London: International Maritime Organization.
- 2. Z. Domachowski, “Minimizing greenhouse gas emissions from ships using a Pareto multi-objective optimization approach,” Polish Marit. Res., vol. 28, no. 2, 2021, pp. 96-101, doi: 10.2478/pomr-2021-0026.
- 3. V. Kuznetsov, B. Dymo, S. Kuznetsova, M. Bondarenko, and A. Voloshyn, “Improvement of the cargo fleet vessels power plants ecological indexes by development of the exhaust gas systems,” Polish Marit. Res., vol. 28, no. 1, 2021, pp. 97-104, doi: 10.2478/pomr-2021-0009.
- 4. J. B. Heywood, Internal Combustion Engine Fundamentals. New York: McGraw-Hill Publ., 1988, 930 p.
- 5. S. Neumann, “High temperature pressure sensor based on thin film strain gauges on stainless steel for continuous cylinder pressure control,” CIMAC Congress, Hamburg. Digest, 2001, pp. 1-12.
- 6. P. Puzdrowska, “Diagnostic information analysis of quickly changing temperature of exhaust gas from marine diesel engine. Part I: Single factor analysis,” Polish Marit. Res., vol. 28, no. 4, 2021, pp. 97-106, doi: 10.2478/pomr-2021-0052.
- 7. P. Bzura, “Diagnostic model of crankshaft seals,” Polish Marit. Res., vol. 26, no. 3, 2019, pp. 39-46, doi: 10.2478/pomr-2019-0044.
- 8. R. Zagan, I. Paprocka, M.-G. Manea, and E. Manea, “Estimation of ship repair time using the genetic algorithm,” Polish Marit. Res., vol. 28, no. 3, 2021, pp. 88-99, doi: 10.2478/pomr-2021-0036.
- 9. R. Varbanets, S. Karianskyi, S. Rudenko, I. V. Gritsuk, A. Yeryganov, O. Kyrylash, and N. Aleksandrovskaya, “Improvement of diagnosing methods of the diesel engine functioning under operating conditions,” SAE Technical Paper, 2017 (No. 2017-01-2218).10.4271/2017-01-2218
- 10. S. Neumann, R. Varbanets, O. Kyrylash, O. V. Yeryganov, and V. O. Maulevych, “Marine diesels working cycle monitoring on the base of IMES GmbH pressure sensors data,” Diagnostyka, vol. 20, no. 2, pp. 19-26, 2019, https://doi.org/10.29354/diag/104516.10.29354/diag/104516
- 11. R. Varbanets, “Diagnostic control of the working process of marine diesel engines in operation,” Dissertation for Doctorate of Technical Sciences, Odessa National Maritime University, 2010.
- 12. R. Varbanets, O. Fomin, V. Píštěk, V. Klymenko, D. Minchev, A. Khrulev, V. Zalozh, and P. Kučera, “Acoustic method for estimation of marine low-speed engine turbocharger parameters,” J. Mar. Sci. Eng., vol. 9, no. 3, p. 321, 2021, http://dx.doi.org/10.3390/jmse9030321.10.3390/jmse9030321
- 13. O. Yeryganov and R. Varbanets, “Features of the fastest pressure growth point during compression stroke,” Diagnostyka, vol. 19, no. 2, pp. 71-76, 2018, https://doi.org/10.29354/diag/89729.10.29354/diag/89729
- 14. R. Varbanets and A. Karianskiy, “Analyse of marine diesel engine performance,” Journal of Polish CIMEEAC. Energetic Aspects, Gdansk, Faculty of Ocean Engineering and Ship Technology Gdansk University of Technology, vol. 7, no. 1, pp. 269-275, 2012.
- 15. J. Girtler, “Limiting distribution of the three-state semi-Markov model of technical state transitions of ship power plant machines and its applicability in operational decision-making,” Polish Marit. Res., vol. 27, no. 2, 2020, pp. 136-144, doi: 10.2478/pomr-2020-0035.
- 16. J. Girtler and J. Rudnicki, “The matter of decision-making control over operation processes of marine power plant systems with the use of their models in the form of semi-Markov decision-making processes,” Polish Marit. Res., vol. 28, no. 1, 2021, pp. 116-126, doi: 10.2478/pomr-2021-0011.
- 17. R. A. Varbanets, V. I. Zalozh, A. V. Shakhov, I. V. Savelieva, and V. M. Piterska, “Determination of top dead centre location based on the marine diesel engine indicator diagram analysis,” Diagnostyka, vol. 21, no. 1, pp. 51-60, 2020, https://doi.org/10.29354/diag/116585.10.29354/diag/116585
- 18. S. Neumann, R. Varbanets, D. Minchev, V. Malchevsky, and V. Zalozh, “Vibrodiagnostics of marine diesel engines in IMES GmbH systems”, Ships Offshore Struct., 2022, pp. 1-12, doi: 10.1080/17445302.2022.2128558.
- 19. D. Minchev, R. Varbanets, N. Aleksandrovskaya, and L. Pisintsaly, “Marine diesel engines operating cycle simulation for diagnostics issues”, Acta Polytechnica, vol. 3, no. 61, pp. 428-440, 2021, http://dx.doi.org/10.14311/AP.2021.61.0435.10.14311/AP.2021.61.0435
- 20. Blitz-PRO by D. S. Minchev. User’s manual. [Online]. Available: http://blitzpro.zeddmalam.com/extra/Tutorial/Help.pdf. date of access: September, 30, 2022.
- 21. D. S. Minchev, et al., “Prediction of centrifugal compressor instabilities for internal combustion engines operating cycle simulation,” In Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 2022, pp. 1-13, https://doi.org/10.1177/09544070221075419.10.1177/09544070221075419
- 22. A. Młynarczak and K. Rudzki, “Optimisation of the topping-up process of lubricating oil in medium-speed marine engines,” Polish Marit. Res., vol. 28, no. 2, 2021, pp. 78-84, doi: 10.2478/pomr-2021-0024.
- 23. MAN B&W S80ME-C7. Project guide. Electronically Controlled Two-stroke Engines – MAN Diesel, 2009.
- 24. How to succeed with HJ SIP. Service Letter 920166 Revision 10. 2020 [Online]. Available: https://hjlubri.dk/sites/default/files/920166-10_0.pdf. date of access: September, 30, 2022.
- 25. 6UEC50LSH-Eco-C2 Instruction Book. Kobe Diesel Co., Ltd. EN00-01_50HC(8)(A) _order 1_0, 2020, 357p.