References
- 1. Pawlak M., Kuźniar M.: Determination of emission of noxious compounds in exhaust gas from naval gas turbine on the basis of emission characteristics of aircraft engine (in Polish), Autobusy, No.12, pp. 345-350, 2017.
- 2. GE, Building on a Marine Power Legacy, 2017.
- 3. NATO Logistics Handbook, NATO Headquarters, Brussels, 2012.
- 4. Giannini R.M., Martin C.J., Strucko R.: Single naval fuel at sea feasibility study – phase one. Naval Air Systems Command Fuels and Lubricants Division, NAVAIRSYSCOM Report 445/02-004, 2002.
- 5. Cengiz D., Burak Z.: Environmental and Economical Assessment of Alternative Marine Fuels, Journal of Cleaner Production Vol. 113, No. 02, pp. 438-449, 2016.
- 6. ASTM D7566 Standard Specification for Aviation Turbine Fuel Containing Synthesized Hydrocarbons, 2018.
- 7. ASTM D 4054 Standard Practice for Evaluation of New Aviation Turbine Fuels and Fuel Additives, 2017.
- 8. Gawron B., T. Białecki T.: Impact of a Jet A-1/HEFA blend on the performance and emission characteristics of a miniature turbojet engine, International Journal of Environmental Science and Technology, Vol. 15, No. 7, pp. 1501-1508, 2018.
- 9. El Gohary M., Ammar N.R.: Thermodynamic Analysis of Alternative Marine Fuels for Marine Gas Turbine Power Plants, J. Marine Sci. Appl. Vol. 15, No. 1, pp. 95-103, 2016.
- 10. Chiong M. C., Chong C. T., Ng J.-H., Lam S. S., Tran M.-V., Chong W.W.F, Mohd Jaafar M.N., Valera-Medina A.,: Liquid biofuels production and emissions performance in gas turbines: A review, Energy Conversion and Management, Vol. 173, pp. 640-658, 2018.
- 11. Kołwzan K., Narewski M.: Study on alternative fuels for marine applications. Latvian Journal of Chemistry, Vol. 51, No. 4, pp. 398-406, 2012.
- 12. Hashimoto N., Nishida H., Ozawa Y.: Fundamental combustion characteristics of Jatropha oil as alternative fuel for gas turbines, Fuel, Vol. 126, pp. 194-201, 2014.
- 13. Seljak T., Sirok B., Katrasnik T.: Advanced fuels for gas turbines: Fuel system corrosion, hot path deposit formation and emissions, Energy Conversion and Management, Vol. 125, pp. 40-50, 2016.
- 14. Spychała J., Kułaszka A., Giewoń J.: Report No. 1/ AŁ-21F3/34/2011.
- 15. ASTM D 3241 Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels, 2018.
- 16. Sarnecki J., Gawron B.: A method of assessing the tendency of aviation fuels to generate thermal degradation products under the influence of high temperatures, Journal of KONES, Vol. 24, No. 4, pp. 377-384, 2017.
- 17. Altin O., Eser S.: Carbon deposit formation from thermal stressing of petroleum fuels; Am. Chem. Soc., Div. Fuel Chem., Vol. 49, No. 2, pp. 764-766, 2004.
- 18. Carlisle H. W., Frew R. W., Mills J. R., Aradi A. A., Avery N. L.: The effect of fuel composition and additive content on injector deposits and performance of an air-assisted direct injection spark ignition (DISI) research engine. SAE paper, No. 2001-01-2030, 2001.
- 19. Osgood E., Mansker K.: Performance Enhancing Diesel Additives, Fuel Marketer News Magazine, pp. 24-26, 2014.
- 20. Stępień Z. - Intake valve and combustion chamber deposits formation – the engine and fuel related factors that impact their growth; NAFTA-GAZ, No. 4, pp. 236-242, 2014.
- 21. Pedley J. F., Hiley R. W., Solly R. K.: Storage stability of petroleum-derived diesel fuel: 4. Synthesis of sediment precursor compounds and simulation of sediment formation using model systems; Fuel, Vol. 68, No. 1, pp. 27-31, 1989.