References
- 1. Praca zbiorowa. (1956). Technologia Związków Azotowych, tom II. Część I Kwas azotowy. PWT Warszawa, 35–182 [in Polish].
- 2. Ullman’s Encyclopedia of Industrial Chemistry (2002) Wiley-VCH Verlag GmbH & Co. KGaA. DOI: 10.1002/14356007.a17_293.10.1002/14356007.a17_293
- 3. Schmidt-Szałowski, K., Szafran, M., Bobryk, E. & Sentek, J. (2013) Technologia Chemiczna. Przemysł Nieorganiczny. PWN, 238–242 [in Polish].
- 4. Moszowski, B. & Wolff, E. (2013). Experience gained during the mechanical and technological start-up of the nitric acid production plant. Przem. Chem. 92, 2207–2210. [in Polish].
- 5. Marret, S. & du Chatelier, L. (1998). Recent advances in catalyst technology used in nitric acid production. The Fertiliser Society Proceedings No. 413.
- 6. Reference Document on Best Available Techniques for the Manufacture of Large Volume Inorganic Chemicals – Ammonia, Acids and Fertilisers, Chapter 3 Nitric Acid, European Commission Document (2007). http://eippcb.jrc.es
- 7. Perez-Ramirez, J., Kapteijn, F., Schoffel, K. & Moulijn, J.A. (2003). Formation and control of N2O in nitric acid production Where do we stand today? Appl. Catal. B 44 117–151. DOI: 10.1016/S0962-3373(03)00026-2.10.1016/S0962-3373(03)00026-2
- 8. Kay, O. & Buennagel, T. (2016) Targeting improving performance and conversion efficiency in nitric acid plants. International Fertiliser Society Proceedings No. 787.
- 9. Najlepsze dostępne techniki (BAT). Wytyczne dla Branży Chemicznej w Polsce. Przemysł Wielkotonażowych Chemikaliów Nieorganicznych, Amoniaku, Kwasów i Nawozów Sztucznych Wersja II, Ministerstwo Środowiska, (2005) [in Polish]. http://www.pipc.org.pl/pl/download/bat/branza_chemiczna/2005-09-29/nawozy_II.pdf
- 10. Abbasfard, H., Ghanbari, M., Ghasemi, A., Ghahraman, G., Jokar, S.M. & Rahimpour, M.R. (2014) CFD modelling of flow mal-distribution in an industrial ammonia oxidation reactor: A case study. Applied Thermal Engineering, 67, 223–229. DOI: 10.1016/j.applthermaleng.2014.03.035.
- 11. Wen, Z. & Petera, J. (2015) CFD Numerical Simulation of Hydrodynamics in a Rotor-Stator Reactor for Biodiesel Synthesis. J. Appl. Mathem. Physics, 3, 997–1002. DOI: http://dx.doi.org/10.4236/jamp.2015.38122.10.4236/jamp.2015.38122
- 12. Udaya Bhaskar, K., Rama Murthy, Y., Ravi Raju, M., Tiwari, S., Srivastava, J.K. & Ramakrishnan, N. (2007) CFD simulation and experimental validation studies on hydrocyclone Min. Engin. 20, 60–71. DOI: 10.1016/jmineng.2006.04.012.10.1016/jmineng.2006.04.012
- 13. Zhang, N., Lu, B., Wang, W. & Li, J. (2010) 3D CFD simulation on hydrodynamics of a 150 MWe circulating fluidized bed boiler. Chem. Engine. J. 162, 821–828, DOI: 10.1016/j.cej.2010.06.033.10.1016/j.cej.2010.06.033
- 14. Kosmadakis, G.M., Rakopoulos, C.D., Demuynck, J., De Paepe, M. & Verhelst, S. (2012) CFD modeling and experimental study of combustion and nitric oxide emissions in hydrogen-fueled spark-ignition engine operating in a very wide range of EGR rates. Int. J. Hydrogen Energy, 37, 10917–10934. DOI: 10.1016/ijhydene.2012.04.067.10.1016/ijhydene.2012.04.067
- 15. Ruszak, M, Inger, M., Wilk, M., Nieścioruk, J., Saramok, M., Kowalik, W., Rajewski, J., Wajman, T., Kacprzak, W. & Tadasiewicz, D. (2017). The application of RANS CFD for design of SNCR technology for a pulverized coal-fired boiler. Polish J. Chem. Technol., 19, 2, 101–106. DOI: 10.1515pjct-2017-0035.