References
- 1. Kuczmaszewski, J. Fundamentals of metal-metal adhesive joint design. Lublin University of Technology, Polish Academy of Sciences, Lublin, 2006.
- 2. Godzimirski, J. Adhesive plastics. Application in repair of technical equipment, WNT, Warsaw, 2010, (in Polish).
- 3. Czaplicki, J., Ćwikliński, J., Godzimirski, J. & Konar, P. Adhesive plastics. Transport and Communication Publishers, Warsaw, 1987, (in Polish).
- 4. Bereska, B., Iłakowska, J., Czaja, K. & Bereska, A. (2014) Hardeners for epoxy resins. Przem. Chem. - Chemical Industry, 93/4:443-448, DOI: dx.medra.org/10.12916/przemchem.2014.443.
- 5. da Silva, L.F.M. & Lopes, M.J.C.Q. (2009) Joint strength optimization by the mixed-adhesive technique. Int. J. Adhes. Adhes. 29(5): 509-514, DOI: 10.1016/j.ijadhadh.2008.09.009.10.1016/j.ijadhadh.2008.09.009
- 6. Banea, M.D. & Da Silva, L.F.M. (2009) Adhesively bonded joints in composite materials: an overview. Proceedings of the Institution of Mechanical Engineers Part L: Journal of Materials: Design and Applications 223(1), 1-18, DOI: 10.1243/14644207JMDA219.10.1243/14644207JMDA219
- 7. Wingfield, J.R.J. (1993) Treatment of composite surfaces for adhesive bonding. Int. J. Adhes. Adhes 13, 3, 151-156. DOI 10.1016/0143-7496(93)90036-9.10.1016/0143-7496(93)90036-9
- 8. Rudawska, A. Filipek, P. & Kowalska, B. (2016) The choosen issues of epoxy compounds modification. Polymer Processing 170(22), 91-99.
- 9. Szymańska, J., Kostrzewa, M., Bakar, M. & Białkowska, A. (2017) Study on adhesive properties and curing of reactive liquid rubbers toughened epoxy-clay ternary hybrid nanocomposites. J. Polym. Eng. - online 11.09.201. DOI: 10.1515/polyeng-2017-0099.10.1515/polyeng-2017-0099
- 10. Palmieri, F.L. at al. (2015) Laser surface preparation of epoxy composites for secondary bonding: optimization of ablation depth. Composite Materials. SAMPE Baltimore Conference and Exhibition, Baltimore, USA, 18-21 May 2015.
- 11. Liston, E.M., Martinu, L. & Wertheimer, M.R. (1993) Plasma surface modification of polymers for improved adhesion: a critical review. J. Adhes. Sci. Techno. 7(10), 1091-1127. DOI: 10.1163/156856193X00600.10.1163/156856193X00600
- 12. Rudawska, A., Reszka, M. & Warda, T. et al. (2016) Milling as a method of surface pre-treatment of steel for adhesive bonding. J. Adhes. Sci. Technol. 30(23), 2619-2636. DOI.org/10.1080/01694243.2016.1191585.10.1080/01694243.2016.1191585
- 13. Rudawska, A., Bociąga, E. & Olewnik-Kruszkowska, E. (2017) The effect of primers on adhesive properties and strength of adhesive joints made with polyurethane adhesives. J. Adhes. Sci. Technol. 31(3), 327-344. doi.org/10.1080/01694243.2016.1215013.10.1080/01694243.2016.1215013
- 14. Abrahami, T.S., Hauffman, T. & De Kok, J.M.M. et al. (2016) Effect of anodic aluminum oxide chemistry on adhesive bonding of epoxy. J. Phys. Chem.: C 120(35), 19670-19677. DOI: 10.1021/acs.jpcc.6b04957.10.1021/acs.jpcc.6b04957
- 15. Martin, R. (2008) Ageing of composites. Cambridge: Woodhead Publishing Limited.
- 16. Harris B (2003) Fatigue in composites, Cambridge: Woodhead Publishing Limited.
- 17. Hu, H., Sun, C.T (2003) The equivalence of moisture and temperature in physical aging of polymeric composites. J. Compos. Mater. 37(10), 913-928. doi.org/10.1177/0021998303037010004.
- 18. Szymiczek, M., Rojek, M. & Wróbel, G. (2016) The influence of the ageing-fatigue degradation on the mechanical properties of glass-reinforced composites. Pol. J. Chem. 18(1), 113-119. doi.org/10.1515/pjct-2016-0017.10.1515/pjct-2016-0017
- 19. Wang, J., Ganga, Rao, H., Liang, R. & Liu, W. (2003) Durability and prediction models of fiber-reinforced polymer composites under various environmental conditions: A critical review. J. Reinf. Plast. Compos. 35(3), 179-211. doi. org/10.1177/0731684415610920.10.1177/0731684415610920
- 20. Kuczmaszewski, J. & Kłonica, M. (2015) Comparative researches of shearing strength of single-lap adhesive bonded joints 316l steel after „thermal shock”. Polymer Processing 164(21), 125-130.
- 21. EN 1465:2009 (2009) Adhesives - Determination of tensile lap-shear strength of bonded assemblies.
- 22. Tabal Wholesale (2017) Sheets from aluminium alloys. Available at: http://hurtownia.tabal.pl/stop-5754-gatunekpa11,262.html (accessed 10 June 2017).
- 23. Hull, D. & Clyne, T.W. (1996) An introduction to composite materials. Cambridge: Cambridge University Press.
- 24. Characteristic card of materials (HUNTSMANN).
- 25. PN-EN ISO 868:2005 (2005) - Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness).