PUR-PIR foam produced based on poly(hydroxybutyl citrate) foamed founded with different factories

Joanna Liszkowska; Bogusław Czupryński; Joanna Paciorek-Sadowska; Marcin Borowicz

doi:10.2478/pjct-2018-0013

Abstract

A poly(hydroxybutyl citrate) p(HBC) was obtained. The product compound produced in the solution during esterification, was added to rigid polyurethane-polyisocyanurate foams (PUR-PIR). The amount of petrochemical polyol in the foams was decreased in favor of the p(HBC) from 0.1 to 0.5 equivalent. The foams were foamed in two ways: with distilled water (W foams) and with Solkane 365/227 (S foams). The examination results of both foam series were compared. They showed that the foams foamed with water have higher softening temperature than the foams foamed with solkane. The retention values for both foam series are around 91–95%, and water absorption in the range of 0.7–3.2%. The anisotropy coefficient did not exceed 1.08 (the lowest value being 1.01).

References

1. Kucińska-Lipka. J., Sienkiewicz, M., Gubanska, I. & Zalewski, S. (2017). Microwave radiation in the synthesis of urethane prepolymers. Eur. Polym. J. 88, 126–135.10.1016/j.eurpolymj.2017.01.017
Search in Google Scholar Back to article
2. Cornille, A., Auvergne, R., Figovsky, O., Boutevin, B. & Caillol, S. (2017). A perspective approach to sustainable routes for non-isocyanate polyurethanes. Eur. Polym. J. 87, 535–552.10.1016/j.eurpolymj.2016.11.027
Search in Google Scholar Back to article
3. Ionescu, M., Radojčić, D., Wana, X., Shrestha, M.L. & Petrović, Z.S. (2016). Upshaw Highly functional polyols from castor oil for rigid polyurethanes. Eur. Polym. J. 84, 736–749.10.1016/j.eurpolymj.2016.06.006
Open DOI Search in Google Scholar Back to article
4. Carriço, C.S., Fraga, T. & Pasa, V.M.D. (2016). Production and characterization of polyurethane foams from a simple mixture of castor oil, crude glycerol and untreated lignin as bio-based polyols. Eur. Polym. J. 85, 53–61.10.1016/j.eurpolymj.2016.10.012
Open DOI Search in Google Scholar Back to article
5. Omrani, I., Farhadian, A., Babanejad, N., Shendi, H.K., Ahmadi, A. & Nabid, M.R. (2016). Synthesis of novel high primary hydroxyl functionality polyol from sunflower oil using thiolyne reaction and their application in polyurethane coating. Eur. Polym. J. 82, 220–231.10.1016/j.eurpolymj.2016.07.021
Open DOI Search in Google Scholar Back to article
6. Piszczyk, Ł., Strankowski, M., Danowska, M., Hejna, A. & Haponiuk, J.T. (2014). Rigid polyurethane foams from a polyglycerol-based polyol. Eur. Polym. J. 57, 143–150.10.1016/j.eurpolymj.2014.05.012
Open DOI Search in Google Scholar Back to article
7. Lubczak, J., Chmiel, E., Barcikowska, M. & Bułdak, N. (2015). New oligoetherols and polyurethane foams prepared using silicic acid derivatives of boric acid. Materials Conference – Modification of Polymers. Status and prospects in 2015. Scientific Papers of the Institute of Technology of Organic and Polymers, Wroclaw University of Technology, Kudowa Zdrój.
Search in Google Scholar Back to article
8. Kania, E. & Lubczak, J. (2014). A new method for the synthesis of the oligoeterols with pyrimidine ring using barbituric acid and glycidol. Polymers (in Polish) 59, 851–854.10.14314/polimery.2014.851
Search in Google Scholar Back to article
9. Radwańska, J., Kurańska, M., Szczepkowski, L. & Prociak, A. (2015). The study bio-rigid polyurethane foams for use in the cosmetic industry. Materials Conference – Modification of Polymers. Status and prospects in 2015. Scientific Papers of the Institute of Technology of Organic and Polymers, Wroclaw University of Technology, Kudowa Zdrój.
Search in Google Scholar Back to article
10. Prociak, A. & Malewska, E. (2015). Effect of the isocyanate index on the properties of flexible polyurethane bio-foams (in Polish). Materials Conference – Modification of Polymers. Status and prospects in 2015. Scientific Papers of the Institute of Technology of Organic and Polymers, Wroclaw University of Technology, Kudowa Zdrój.
Search in Google Scholar Back to article
11. Prociak, A. & Malewska, E. (2015). The effect of nanosilica filler on the foaming process and properties of flexible polyurethane foams obtained with rapeseed oil-based polyol. Polymers, 60, 472–479.10.14314/polimery.2015.472
Search in Google Scholar Back to article
12. Wojturska, J., Frącz, W., Stagraczyński, R. & Grendysa, P. (2015). Synthesis and evaluation of selected properties of polyurethanes obtained using biopoliols. Materials Conference – Modification of Polymers. Status and prospects in 2015 Scientific Papers of the Institute of Technology of Organic and Polymers, Wroclaw University of Technology, Kudowa Zdrój.
Search in Google Scholar Back to article
13. Lubczak, J. & Lubczak, R. (2015). Melamine and its salts as an additive flame retardants to polyurethane heat-resistant foams. Materials Conference – Modification of Polymers. Status and prospects in 2015. Scientific Papers of the Institute of Technology of Organic and Polymers, Wroclaw University of Technology, Kudowa Zdrój.
Search in Google Scholar Back to article
14. Czech-Polak, J., Przybyszewski, B., Heneczkowski, M., Czulak, A. & Gude, M. (2016). Effect of environmentally-friendly flame retardants on fire resistance and mechanical properties of rigid polyurethane foams. Polymers, 61, 113–116.10.14314/polimery.2016.113
Search in Google Scholar Back to article
15. Paciorek-Sadowska, J., Czupryński, B., Liszkowska, J. & Kotarska, K. (2012). Fire-safe polyurethane plastic modified new flame retardant – use of new methods for flammability test. Enginee. Chem. Equip. 51, 58–60.
Search in Google Scholar Back to article
16. Paciorek-Sadowska, J., Czupryński, B. & Liszkowska, J. (2014). Preparation of new compound reducing flammability. European Chemistry Congress – 5th EuCheMS, Istambul, Turky (2014).
Search in Google Scholar Back to article
17. Paciorek-Sadowska, J., Czupryński, B. & Liszkowska, J. (2015). Boron-containing fire retardant rigid polyurethanepolyisocyanurate foams. Part I-polyol precursors based on boric acid and di(hydroxymetyl)urea derivatives. J. Fire Sci. 33, 37–47.10.1177/0734904114554384
Search in Google Scholar Back to article
18. Paciorek-Sadowska, J., Czupryński, B., Liszkowska, J. (2015). Boron-containing fire retardant rigid polyurethanepolyisocyanurate foams. Part II-preparation and evaluation. J. Fire Sci. 33, 38–68.10.1177/0734904114554385
Search in Google Scholar Back to article
19. Paciorek-Sadowska, J., Czupryński, B., Liszkowska, J. (2012). Fire-safe polyurethanes modified with new antipyrene. Chemist, 66, 297–306.
Search in Google Scholar Back to article
20. Paciorek-Sadowska, J. (2010). Modification of PURPIR foams by boroorganic compound obtained on the basis of bis(hydroxymethyl)urea. Polymers, 55 (2010) pp. 373–378.10.14314/polimery.2010.373
Search in Google Scholar Back to article
21. Song, H., Jianqiang, L.J., Xue, F. & Cheng, F. (2016). Flame retardant properties of gas sealing materials used in coal mines. Polymers 61 (2016), 266–271.10.14314/polimery.2016.266
Search in Google Scholar Back to article
22. Eliwa, R., Oleksy, M., Heneczkowski, M., Oliwa, R., Budzik, G., Kozik, B., Markowska, O., Strachota, A. (2015). Fire-resistant hybrid epoxy composites. Polymers 60, 667–670.10.14314/polimery.2015.667
Search in Google Scholar Back to article
23. Liszkowska, J., Czupryński, B., Paciorek-Sadowska, J. (2015). Tris(hydroxydietylene)-2-hydroxypropane-1,2,3- trikarboksylate for rigid PUR-PIR foams. J. Polymer Enginee. 35, 743–751.10.1515/polyeng-2014-0263
Search in Google Scholar Back to article
24. Liszkowska, J., Czupryński, B. & Paciorek-Sadowska, J. (2015). Synthesis of rigid PUR-PIR foams with a new polyol. Enginee. Equip. Chem. 54, 10–11.
Search in Google Scholar Back to article
25. Liszkowska, J., Czupryński, B., Paciorek-Sadowska, J. & Moraczewski, K. (2015). The effect of UV radiation on the properties of rigid PUR-PIR foams. Adv. Polym. Technol. 2015, 0, 21631–21639. DOI 10.1002/adv.21631 (on-line: ADV-10-14-220).
Search in Google Scholar Back to article
26. Paciorek-Sadowska, J., Czupryński, B., Borowicz, M. & Liszkowska, J. (2016). Use of tuff for the production of rigid polyurethane-polyisocyanurate foams. Chem. Ind. 95, 42–47.
Search in Google Scholar Back to article
27. Paciorek-Sadowska, J., Czupryński, B., Borowicz, M. & Liszkowska, J. (2015). Research on obtaining new type of polyurethane composite – rapeseed press cake. Part 1. The strength tests and flammability of a new composite. Chemnitz Technomer 12–13 November 2015.
Search in Google Scholar Back to article
28. Paciorek-Sadowska, J., Czupryński, B., Borowicz, M. & Liszkowska, J. (2015). New plastic polyurethane involving bio-filler. Polimers 60, 586–591.10.14314/polimery.2015.586
Search in Google Scholar Back to article
29. Paciorek-Sadowska, J., Czupryński, B., Borowicz, M. & Liszkowska, J. (2014). The use of a by-product of burning coal in the production of polyurethane plastics. Enginee. Equip. Chem. 53, 99–100.
Search in Google Scholar Back to article
30. Kurańska, M., Prociak, A., Cabulis, U. & Kirpluks, M. (2015). Water-blown polyurethane-polyisocyanurate foams based on bio-polyols with wood fibers. Polymers 60 (2015) 705–712.10.14314/polimery.2015.705
Search in Google Scholar Back to article
31. Czupryński, B., (2004). Issues of polyurethane chemistry and technology. Akademia Bydgoska, Bydgoszcz.
Search in Google Scholar Back to article
32. Wirpsza, Z. (1991) Poliuretanes. Chemistry, technology, application. WNT, Warsaw.
Search in Google Scholar Back to article
33. Liszkowska, J., Czupryński, B. & Paciorek-Sadowska, J. (2016). Thermal properties of polyurethane-polyisocyanurate (PUR-PIR) foams modified with tris(5-hydroxypentyl)-2-hydroxypropane- 1,2,3-tricarboxylate. J. Adv. Chem. Enginee. 6(2), 148–154.10.1515/polyeng-2014-0263
Search in Google Scholar Back to article
34. Czupryński, B., Liszkowska, J. & Paciorek-Sadowska, J. (2008). Modification of rigid polyurethane-polyisocyanurate foam selected powder fillers. Polymers 53(2008) 48–52.10.14314/polimery.2008.133
Search in Google Scholar Back to article
35. Czupryński, B., Liszkowska, J. & Paciorek-Sadowska, J. (2013). The influence silica, kaolin and epoxy resin on heat and thermal properties of rigid PUR-PIR foams. J. Cell. Plast. 49, 375–390.10.1177/0021955X13477671
Search in Google Scholar Back to article

PUR-PIR foam produced based on poly(hydroxybutyl citrate) foamed founded with different factories

Abstract

Paradigm

My account