Skip to main content
Have a personal or library account? Click to login
Investigation of the thermal protection ablative properties of thermosetting composites with powder fillers: the corundum Al2O3 and the Carbon Powder C Cover

Investigation of the thermal protection ablative properties of thermosetting composites with powder fillers: the corundum Al2O3 and the Carbon Powder C

Green Sciences
Volume 15 (2013): Issue 4 (December 2013)
By: ,   and    
Open Access
|Dec 2013
References

References

  1. 1. Jackowski, A. (1986). Ablation fl at wall erosion under fl oating layer ablation [in polish]. Biuletyn WAT. 460(6), 23-33.
    Search in Google Scholar
  2. 2. Shyam Sunder, S. (2005, December). Federal Building andFire Safety Investigation of the World Trade Center Disaster:Final Report of the National Construction Safety Team on theCollapses of the World Trade Center Towers (NIST NCSTAR1). Retrieved Jun 12, 2006, from http://www.nist.gov/manuscript--publication-search.cfm?pub_id=909236
    Search in Google Scholar
  3. 3. Haack, A. (2004). Latest achievements and perspectives in tunnel safety. Tunn. Undergr. Space Technol. 19, 305. DOI: 10.1016/j.tust.2004.01.007.10.1016/j.tust.2004.01.007
    Open DOISearch in Google Scholar
  4. 4. Ono, K. & Otsuka, T. (2006). Fire design requirement forvarious tunnels. 32nd ITA - World Tunnel Congress, 22-27 April 2006. Seoul, Republic of Korea. Retrieved Jun 23, 2006, from www.ita2006.com
    Search in Google Scholar
  5. 5. Kucharczyk, W. (2007). Shaping the thermal protectionablative properties of polymer composites with powder fi llers [in polish]. Unpublished doctoral dissertation, Technical University of Radom, Radom, Poland.
    Search in Google Scholar
  6. 6. Feng-Er, Y. (2004). Study on the ablation materials ofmodifi ed polyurethane/polysiloxane. Unpublished doctoral dissertation, National Sun Yat-sen University, Guangzhou, People Republic of China.
    Search in Google Scholar
  7. 7. Kucharczyk, W. (2010). Some ablative properties of epoxy composites used for thermoprotection [in polish]. Przem. Chem. 89, 1673-1676.
    Search in Google Scholar
  8. 8. Kucharczyk, W. (2012). Ablative and abrasive wear of phenolic-formaldehyde glass laminates with powder fi llers. Eksploat. Niezawod. 14, 11-17.
    Search in Google Scholar
  9. 9. Bahramian, A.R. & Kokabi, M. (2009). Ablation mechanism of polymer layered silicate nanocomposite heat shield. J.Hazard. Mater. 166, 445-454. DOI: 10.1016/j.jhazmat.2008.11.061.10.1016/j.jhazmat.2008.11.061
    Open DOISearch in Google Scholar
  10. 10. Dec, J.E. (2010). Three dimensional fi nite element ablativethermal response analysis applied to heatshield penetrationdesign. Unpublished doctoral dissertation, School of Aerospace Engineering, Atlanta, USA.
    Search in Google Scholar
  11. 11. Patton, R.D., Pittman, Jr. C.U., Wang, L., Hill, J.R. & Day, A. (2002). Ablation, mechanical and thermal conductivity properties of vapour grown carbon fi ber/phenolic matrix composites. Compos. Part A-Appl. S. 33, 243-251. DOI: 10.1016/S1359-835X(01)00092-6.10.1016/S1359-835X(01)00092-6
    Open DOISearch in Google Scholar
  12. 12. Park, J.K. & Kang, T.J. (2002). Thermal and ablative properties of low temperature carbon fi ber-phenol formaldehyde resin composites. Carbon. 40, 2125-2134. DOI: 10.1016/ S0008-6223(02)00063-5.10.1016/S0008-6223(02)00063-5
    Open DOISearch in Google Scholar
  13. 13. Liu, L., Li, H., Shi, X., Feng, W., Wang, Y. & Yao, D. (2013). Effects of SiC addition on the ablation properties of C/C composites in different heat fl uxes under oxyacetylene torch. Vacuum. 90, 97-99. DOI: 10.1016/j.vacuum.2012.09.025.10.1016/j.vacuum.2012.09.025
    Open DOISearch in Google Scholar
  14. 14. Suberlyak, O., Krasinskiy, V., Sikora, J. & Krzyżak, A. (2012). Ammonia-free, low-toxic press-materials with improved electroinsulating properties based on modifi ed novolak phenol-formaldehyde resin. Chem. and Chemical Technol. 6, 199-202.10.23939/chcht06.02.199
    Open DOISearch in Google Scholar
  15. 15. Leszek, W. (1997). Empirical research. Some methodologicalissues [in polish] (1st ed.). Radom, Poland: Institute for Sustainable Technologies in Radom.
    Search in Google Scholar
  16. 16. Song, G.M., Zhou, Y. & Wang, Y-J. (2003). Effect of carbide particles on the ablation properties of tungsten composites. Mater. Charact. 50, 293-303. DOI: 10.1016/S1044-5803(03)00123-2.10.1016/S1044-5803(03)00123-2
    Open DOISearch in Google Scholar
DOI: https://doi.org/10.2478/pjct-2013-0067 | Journal eISSN: 3072-0389 (formerly 1899-4741) | Journal ISSN: 1509-8117
Journal RSS Feed
Language: English
Page range: 49 - 53
Published online: Dec 31, 2013
Published in print: Dec 1, 2013
Published by: West Pomeranian University of Technology, Szczecin
In partnership with: Paradigm Publishing Services
Publication frequency: Volume open
Keywords:
ablative shields and coats,
thermosetting polymer composites,
high-melting fillers,
thermoprotective materials
Related subjects:
Industrial chemistry,
Biotechnology,
Chemical engineering,
Process engineering

© 2013 Wojciech Kucharczyk, Paweł Przybyłek, Tadeusz A. Opara, published by West Pomeranian University of Technology, Szczecin
This work is licensed under the Creative Commons License.

Volume 15 (2013): Issue 4 (December 2013)
Previous article
Next article