A novel functional MgO ∙ SiO2/polyhedral oligomeric silsesquioxane hybrids as an active filler of polypropylene

Damian Ambrożewicz; Paulina Jakubowska; Arkadiusz Kloziński; Magdalena Nowacka; Beata Dudziec; Ewa Andrzejewska; Teofil Jesionowski; Bogdan Marciniec

doi:10.2478/pjct-2013-0066

.blurhash-client-img { display: none !important; }

A novel functional MgO ∙ SiO2/polyhedral oligomeric silsesquioxane hybrids as an active filler of polypropylene

Green Sciences

Volume 15 (2013): Issue 4 (December 2013)

By: Damian Ambrożewicz, Paulina Jakubowska, Arkadiusz Kloziński, Magdalena Nowacka, Beata Dudziec, Ewa Andrzejewska, Teofil Jesionowski and Bogdan Marciniec

Open Access

|Dec 2013

Abstract

New organic/inorganic hybrid fillers were obtained by mechanical modification of magnesium silicate with selected polyhedral oligomeric silsesquioxane and characterized afterwards. MgO ∙ SiO₂ was precipitated in a water system. The effect of chemical modification of magnesium silicate surface on their physicochemical properties was determined. Functionalization was carried out with the use of different amount of (1-(3-hydroxypropyl)dimethylsiloxy- 3,5,7,9,11,13,15-hepta(isobutyl)pentacyclo-[9.5.1.13, 9.15, 15.17, 13]octasiloxane). The polypropylene composites of 0.5, 1.0 and 1.5 wt.% modified by 10 weight parts by the mass of the filler were also produced. For the obtained polypropylene composites measurements of the tensile strength, Young’s modulus and elongation at break were performed

References

1. Koyima, Y., Usuki, A., Kawasumi, M., Okada, A., Fukushima, Y., Kurauchi, T. & Kamigaito, O. (1993). Mechanical properties of nylon 6-clay hybrid.. 8, 1185-1189. DOI: 10.1557/JMR.1993.1185.
Open DOI Search in Google Scholar
2. Kim, K.M., Keum, D.K. & Chujo, Y. (2003). Organicinorganic polymer hybrids using polyoxazoline initiated by functionalized silsesquioxane.36, 867-875. DOI: 10.1021/ma021303b.
Open DOI Search in Google Scholar
3. Usuki, A., Kawasumi, M., Kojima, Y., Fukushima, Y., Okada, A., Kurauchi, T. & Kamigaito, O. (1993). Synthesis of nylon 6-clay hybrid.8, 1179-1184. DOI: 10.1557/ JMR.1993.1179.
Open DOI Search in Google Scholar
4. Lane, R.M., Choi, J. & Lee, I. (2001). Organic inorganic nanocomposites with completely defined interfacial interactions.13, 800-803. DOI: 10.1002/1521-4095(200106)13:11<800::AID-ADMA-800>3.0.CO;2-G.
Open DOI Search in Google Scholar
5. Andrzejewska, E., Marcinkowska, A. & Wegner, K. (2011). Nanocomposites obtained by photopolymerization of (methacrylate monomer)/(methacrylate functionalized polyhedral oligomericsilsesquioxane) system.56, 63-66.
Open DOI Search in Google Scholar
6. Chmielewska, D., Barczewski, M. & Sterzyński, T. (2013). A new method of curing epoxy resin by using bis(heptaphenylaluminosilsesquioxane) as a hardener.58, 270-275. DOI: dx.doi.org/10.14314/polimery.2013.270.
Open DOI Search in Google Scholar
7. Baldi, F., Bignotti, F., Fina, A., Tabuani, D. & Ricco, T. (2007). Mechanical characterization of polyhedral oligomeric silsesquioxane/polypropylene blends.. 105, 935-943. DOI: 10.1002/app.26142.
Open DOI Search in Google Scholar
8. Zhou, Z., Zhang, Y., Zeng, Z. & Zhang, Y. (2008). Properties of POSS-fi lled polypropylene: comparison of physical blending and reactive blending.. 110, 3745-3751. DOI: 10.1002/app.29007.
Open DOI Search in Google Scholar
9. Joshi, M., Butola, B.S., Simon, G. & Kukaleva, N. (2006). Rheological and viscoelastic behavior of HDPE/Octamethyl- POSS nanocomposites.39, 1839-1849. DOI: 10.1021/ma051357.
Open DOI Search in Google Scholar
10. Misra, R., Fu, B.X. & Morgan, S.E. (2007). Surface energetics, dispersion, and nanotribomechanical behavior of POSS/PP hybrid nanocomposites.. 45, 2441-2445. DOI; 10.1002/polb21261.
Open DOI Search in Google Scholar
11. Scapini, P., Figueroa, C., Amorim, C., Machado, G., Mauler, R., Crespo, J. & Oliveira, R(2010). Thermal and morphological properties of high-density polyethylene/ethylene- vinyl acetate copolymer composites with polyhedral oligomeric silsesquioxane nanostructure.. 59, 175-180. DOI: 10.1002/pi.2704.
Open DOI Search in Google Scholar
12. Brown, J.F.Jr. & Vogt, L.H.Jr. (1965). The polycondensation of cyclohexylsilanetriol.87, 4313-4317. DOI: 10.1021/ja00947a016.
Open DOI Search in Google Scholar
13. Cordes, D.B., Lickiss, P.D. & Rataboul, F. (2010). Recent development in the chemistry of cubic polyhedral oligoemric oligosilsesquioxanes.110, 2081-2173. DOI: 10.1021/ cr900201r.
Open DOI Search in Google Scholar
14. Constantopoulos, K., Clarke, D., Markovic, E., Uhrig, D., Clarke, S., Matisons, J.G. & Simon, G. (2004). New family of POSS monomers suitable for forming urethane polymerizable coatings.. 45, 668.
Search in Google Scholar
15. Mammeri, F., Bonhomme, C., Ribot, F., Babonneau, F. & Dire, S. (2005). Modifi cation and characterization of Si-based nanobulding blocks to design hybrid oxide-polymer materials.847, 363, EE13.26.1.
Search in Google Scholar
16. Cordes, D.B. & Lickiss, P. D., Rataboul F. (2010). Recent developments in the chemistry of cubic polyhedral oligosilsesquioxanes.110, 2081-2173. DOI: 10.1021/cr900201r.
Open DOI Search in Google Scholar
17. Maciejewski, H., Szubert, K. & Marciniec, B. (2012). New approach to synthesis of functionalised silsesquioxanes via hydrosilylation.24, 1-4. DOI: 10.1016/j. catcom.2012.03.011.
Open DOI Search in Google Scholar
18. Jakubowska, P., Sterzyński, T. & Królikowski, B. (2008). The properties of polyolefi ns modifi ed with PET powder.. 109, 1993-1999. DOI: 10.1002/app.27704.
Open DOI Search in Google Scholar
19. Wu, J. & Mather, P.T. (2009). POSS polymers: physical properties and biomaterials applications.49, 25-63. DOI: 10.1080/15583720802656237.
Open DOI Search in Google Scholar
20. Kallel, T., Nageotte, V., Jaziri, M., Gérard, J.F. & Elleuch, B. (2003). Compatibilization of PE/PS and PE/PP blends. I. Effect of processing conditions and formulation.. 90, 2475-2484. DOI: 10.1002/app.12873.
Open DOI Search in Google Scholar
21. Zhou, Z., Zhang, Y., Zhang, Y. & Yin, N. (2008) Rheological behavior of polypropylene/octavinyl polyhedral oligomeric silsesquioxane composites.46, 526-533. DOI: 10.1002/polb.21386.
Open DOI Search in Google Scholar

Articles in this issue

DOI: https://doi.org/10.2478/pjct-2013-0066 | Journal eISSN: 3072-0389 (formerly 1899-4741) | Journal ISSN: 1509-8117

Journal RSS Feed

Language: English

Page range: 42 - 48

Published on: Dec 31, 2013

Published by: West Pomeranian University of Technology, Szczecin

In partnership with: Paradigm Publishing Services

Publication frequency: Volume open

Keywords:

Hybrids fillers,

Magnesium silicate,

Polyhedral oligomeric silsesquioxane,

Polypropylene,

Polymer composites,

Mechanical properties

Related subjects:

Industrial chemistry,

Biotechnology,

Chemical engineering,

Process engineering

© 2013 Damian Ambrożewicz, Paulina Jakubowska, Arkadiusz Kloziński, Magdalena Nowacka, Beata Dudziec, Ewa Andrzejewska, Teofil Jesionowski, Bogdan Marciniec, published by West Pomeranian University of Technology, Szczecin
This work is licensed under the Creative Commons License.

Volume 15 (2013): Issue 4 (December 2013)