References
- 1. Mansha M., Saleemi A.R., Javed S.H. & Nadeem Feroz (2011). Analysis of a Detailed Kinetic Model of Natural Gas Combustion in IC Engine, Polish Journal of Chemical Technology, 13, 1, 6-15, DOI: 10.2478/v10026-011-0002-0.
- 2. Kountz, K. (1994). Modeling The Fast Fill Process in Natural Gas Vehicle Storage Cylinders”, American Chemical Society Paper at 207th National ACS Meeting, March.
- 3. Kountz, Kenneth J. & Blazek, Christopher F. (1997). NGV Fuelling Station and Dispenser Control Systems,” report GRI-97/0398, Gas Research Institute, Chicago, Illinois, November.
- 4. Kountz, K., Liss, W. & Blazek, C. (1998). Method and Apparatus For Dispensing Compressed Natural Gas”, U.S. Patent 5,752,552, May 19.
- 5. Kountz, K., Liss, W. & Blazek, C. (1998). Automated Process and System For Dispensing Compressed Natural Gas”, U.S. Patent 5,810,058, Sept. 22.
- 6. Kountz, K., Liss, W. & Blazek, C. (1998) A New Natural Gas Dispenser Control System, Paper at 1998 International Gas, Research Conference, San Diego, November 3.
- 7. Liss, W.E. & Richards M. (2003). Development of a Natural Gas to Hydrogen Fueling Station, Topical Report for U.S. DOE, GTI-02/0193, Sept., 2002.
- 8. Liss, W.E., Richards, M.E., Kountz, K. & Kriha, K. (2003) “Modeling and Testing of Fast-Fill Control Algorithms for Hydrogen Fueling,” 2003 National Hydrogen Association Meeting, March.
- 9. Farzaneh-Gord, M., Deymi-Dashtebayaz, M., Rahbari, HR. & Nyazmand H. (2012) Effects of storage types and conditions on compressed hydrogen fuelling stations performance. International Journal of Hydrogen energy, 37, 3500-3509, DOI: 10.1016/j.bbr.2011.03.031.
- 10. Newhouse, N.L. & Liss, W.E. (1999). Fast Filling of NGV Fuel Containers, SAE paper 1999-01-3739.
- 11. Thomas, G., Goulding, J. & Munteam, C. ( 2002). Measurement, “Approval and Verification of CNG Dispensers”, NWML KT11 Report.
- 12. Shipley, E. (2002). Study of natural gas vehicles (NGV) during the fast fills process”, Thesis for Master of Science, College of Engineering and Mineral Resources at West Virginia University.
- 13. Farzaneh-Gord, M., Eftekhari, H., Hashemi, S., Magrebi, M. & Dorafshan, M. (2007). The effect of initial conditions on filling process of CNG cylinders”, The second International conference on Modeling, Simulation, And Applied optimization, Abu Dhabi, UAE, March 24-27.
- 14. Farzaneh-Gord, M. (2008). Compressed natural gas Single reservoir filling process”, Gas international Engineering and Management, Volume 48, Issue 6, July/August, pp 16-18.
- 15. Farzaneh-Gord, M, Hashemi, SH, Farzaneh-Kord, A. (2008). Thermodynamics Analysis of Cascade Reserviors Filling Process of Natural Gas Vehicle Cylinders, World AppliedSciences Journal, 5 (2): 143-149.
- 16. Farzaneh-Gord, M., Deymi-Dashtebayaz, M. & Rahbari, H.R. (2011). Studying effects of storage types on performance of CNG filling stations, Journal of Natural Gas Science andEngineering, Vol. 3, 334-340. DOI: 10.1016/j.jngse.2011.02.001.
- 17. Farzaneh-Gord, M., Deymi-Dashtebayaz, M. & Rahbari, H.R. 2012. Effects of Natural Gas Compositions on CNG Fast Filling Process for Buffer Storage System, Oil & Gas Scienceand Technology - Rev. IFP Energies nouvelles.
- 18. Farzaneh-Gord, M., Deymi-Dashtebayaz, M. & Rahbari, H.R. 2012. Optimizing Compressed Natural Gas Filling Stations Reservoir Pressure Based on Thermodynamic Analysis, Int. J. Exergy, Vol. 10, No. 3. DOI: 10.1504/IJEX.2012.046836.
- 19. Bejan, A. (1982) Second-law analysis in heat transfer and thermal design, Adv. Heat Transfer 15, 1-58.
- 20. Bejan, A. (1996). Entropy Generation Minimization, CRC, Boca Raton, NY.
- 21. Bejan, A. (1979). A study of entropy generation in fundamental convective heat transfer, J. Heat Transfer 101, 718-725.
- 22. Wise Gas: CNG Cylinder Safety, http://www.wisegasinc.com/wg-cylindersafety.htm